- 您现在的位置：买卖IC网 > PDF目录68990 > ADL5375-05ACPZ-R7 (ANALOG DEVICES INC) 400 MHz - 6000 MHz RF/MICROWAVE I/Q MODULATOR PDF资料下载
参数资料
| 型号： | ADL5375-05ACPZ-R7 |
| 厂商： | ANALOG DEVICES INC |
| 元件分类： | 调制器/解调器 |
| 英文描述： | 400 MHz - 6000 MHz RF/MICROWAVE I/Q MODULATOR |
| 封装： | 4 X 4 MM, ROHS COMPLIANT, MO-220-VGGD-8, LFCSP-24 |
| 文件页数： | 16/32页 |
| 文件大小： | 1247K |
| 代理商： | ADL5375-05ACPZ-R7 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页当前第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页
ADL5375
Rev. A | Page 23 of 32
APPLICATIONS INFORMATION
DAC MODULATOR INTERFACING
Driving the ADL5375-05 with a TXDAC
The ADL5375-05 is designed to interface with minimal
components to members of the Analog Devices, Inc. TxDAC
families. These dual-channel differential current output DACs
feature an output current swing from 0 mA to 20 mA. The
interface described in this section can be used with any DAC
that has a similar output.
An example of an interface using the AD9779A TxDAC is
shown in Figure 57. The baseband inputs of the ADL5375-05
require a dc bias of 500 mV. The average output current on each
of the outputs of the AD9779A is 10 mA. Therefore, a single
50 Ω resistor to ground from each of the DAC outputs results
in an average current of 10 mA flowing through each of the
resistors, thus producing the desired 500 mV dc bias for the
inputs to the ADL5375-05.
RBIP
50
RBIN
50
93
92
OUT1_N
OUT1_P
IBBN
IBBP
ADL5375-05
RBQN
50
RBQP
50
84
83
OUT2_P
OUT2_N
QBBP
QBBN
07
052
-03
3
21
22
9
10
Figure 57. Interface Between the AD9779A and ADL5375-05 with 50 Ω
Resistors to Ground to Establish the 500 mV DC Bias for the ADL5375-05
Baseband Inputs
The AD9779A output currents have a swing that ranges from
0 mA to 20 mA. With the 50 Ω resistors in place, the ac voltage
swing going into the ADL5375-05 baseband inputs ranges from 0
V to 1 V. A full-scale sine wave out of the AD9779A can be
described as a 1 V p-p single-ended (or 2 V p-p differential)
sine wave with a 500 mV dc bias.
Limiting the AC Swing
There are situations in which it is desirable to reduce the ac
voltage swing for a given DAC output current. This can be
achieved through the addition of another resistor to the interface.
This resistor is placed in the shunt between each side of the
differential pair, as shown in Figure 58. It has the effect of
reducing the ac swing without changing the dc bias already
established by the 50 Ω resistors.
RBIP
50
RBIN
50
93
92
21
22
IBBN
IBBP
ADL5375-05
RBQN
50
RBQP
50
84
83
9
10
RSLI
100
RSLQ
100
OUT1_N
OUT1_P
OUT2_P
OUT2_N
QBBP
QBBN
07
05
2-
03
4
Figure 58. AC Voltage Swing Reduction Through the Introduction
of a Shunt Resistor Between Differential Pair
The value of this ac voltage swing limiting resistor is chosen
based on the desired ac voltage swing. Figure 59 shows the
relationship between the swing-limiting resistor and the peak-
to-peak ac swing that it produces when 50 Ω bias-setting
resistors are used.
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
10
100
1000
10000
D
IFF
E
R
E
N
TI
A
L
S
W
IN
G
(
V
p-
p
)
RL ()
070
52
-03
5
Figure 59. Relationship Between the AC Swing-Limiting Resistor and the
Peak-to-Peak Voltage Swing with 50 Ω Bias-Setting Resistors
Filtering
It is necessary to place an antialiasing filter between the DAC
and modulator to filter out Nyquist images and broadband
DAC noise. The interface for setting up the biasing and ac
swing discussed in the Limiting the AC Swing section lends
itself well to the introduction of such a filter. The filter can be
inserted between the dc bias setting resistors and the ac swing-
limiting resistor. Doing so establishes the input and output
impedances for the filter.
Figure 60 shows a third-order, Bessel low-pass filter with a 3 dB
frequency of 10 MHz. Matching input and output impedances
make the filter design easier, so the shunt resistor chosen is
100 Ω, producing an ac swing of 1 V p-p differential. The
frequency response of this filter is shown in Figure 61.
相关PDF资料 |
PDF描述 |
|---|---|
| AH212-S8G | 1800 MHz - 2400 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| AK1222 | 100 MHz - 900 MHz RF/MICROWAVE SINGLE BALANCED MIXER |
| ALM-40220-BLKG | 2010 MHz - 2025 MHz RF/MICROWAVE SGL POLE DOUBLE THROW SWITCH, 0.45 dB INSERTION LOSS |
| ALT6704RM45P9 | 1710 MHz - 1785 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| ALT6704RM45Q7 | 1710 MHz - 1785 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADL5375-05ACPZ-R71 | 制造商:AD 制造商全称:Analog Devices 功能描述:400 MHz to 6 GHz Broadband Quadrature Modulator |
| ADL5375-05ACPZ-WP | 制造商:Analog Devices 功能描述:400 MHZ TO 6 GHZ BROADBAND QUADRATURE MODULATOR - Waffle Pack |
| ADL5375-05ACPZ-WP1 | 制造商:AD 制造商全称:Analog Devices 功能描述:400 MHz to 6 GHz Broadband Quadrature Modulator |
| ADL5375-05EP-EVALZ | 功能描述:EVAL BOARD FOR ADL5375-05EP 制造商:analog devices inc. 系列:- 零件状态:有效 类型:调制器 频率:400MHz ~ 6GHz 配套使用产品/相关产品:ADL5375-05EP 所含物品:板 标准包装:1 |
| ADL5375-05-EVALZ | 功能描述:BOARD EVAL FOR ADL5375-05 RoHS:是 类别:RF/IF 和 RFID >> RF 评估和开发套件，板 系列:- 标准包装:1 系列:- 类型:GPS 接收器 频率:1575MHz 适用于相关产品:- 已供物品:模块 其它名称:SER3796 |
发布紧急采购，3分钟左右您将得到回复。