- 您现在的位置：买卖IC网 > PDF目录373996 > ADM1072ARQ (ANALOG DEVICES INC) Dual, USB 2.0 Full/Standby Power Controller with Supply Steering PDF资料下载
参数资料
| 型号： | ADM1072ARQ |
| 厂商： | ANALOG DEVICES INC |
| 元件分类： | 电源管理 |
| 英文描述： | Dual, USB 2.0 Full/Standby Power Controller with Supply Steering |
| 中文描述： | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO16 |
| 封装： | QSOP-16 |
| 文件页数： | 8/8页 |
| 文件大小： | 88K |
| 代理商： | ADM1072ARQ |
ADM1072
–8–
Rev. PrE 1/02
OUT LINE DIMENSIONS
Dimensions shown in inches and (mm).
16-Pin QSOP Package (RQ-16)
16
9
8
1
0.197 (5.00)
0.189 (4.80)
0.244 (6.20)
0.228 (5.79)
PIN 1
0.157 (3.99)
0.150 (3.81)
SEATING
PLANE
0.010 (0.25)
0.004 (0.10)
0.012 (0.30)
0.008 (0.20)
0.025
(0.64)
BSC
0.059 (1.50)
MAX
0.069 (1.75)
0.053 (1.35)
0.010 (0.20)
0.007 (0.18)
0.050 (1.27)
0.016 (0.41)
8
0
APPLICAT IONS INFORMAT ION
INPUT FILT ERING
T o prevent the input voltage being pulled below the minimum
operating voltage under transient short-circuit conditions,
before the current limit has had time to operate, a reservoir
capacitor should be connected from MAIN_IN to GND. T his
does not need to be large, but should have a low ESR. A value
of around 10 - 22μF is suitable. Larger values will reduce the
voltage drop still further. T he ST BY_IN input requires a
proportionately smaller value, typically 2.2 to 4.7μF.
OUT PUT CAPACIT ANCE
120μF capacitors should be connected between OP1 and OP2
and GND to prevent the back e.m.f. of parasitic inductance
from pulling OP1 and OP2 below ground during turn-off and
to provide adequate turn- on current for Universal Serial Bus
(USB) applications that are hot plugged to OP! or OP2. T his
causes the output rise and fall times to be longer, as shown in
the typical operating characteristics, but does not affect the
turn-off time of the ADM1072 itself.
LAYOUT CONSIDERAT IONS
Printed circuit board tracks to and from the ADM1072 should
be as thick and as short as possible to minimise parasitic induc-
tance and take full advantage of the fast response time of the
switch. Input and output capacitors should be placed as close
to the device as possible (less than 5mm).
T HERMAL CONSIDERAT IONS
Under normal operating conditions, the worst-case power
dissipation will be 135mW with the 135m on resistance and
3V supply (W = (1A)
2
0.135 ). T he package is capable of
handling and dissipating this power, but heat dissipation can
further be improved by providing a large area of copper in
contact with the device pins, particularly MAIN_IN and
OP1,OP2.
相关PDF资料 |
PDF描述 |
|---|---|
| ADM1085 | Simple Sequencers in 6-Lead SC70 |
| ADM1085AKS-REEL7 | Simple Sequencers in 6-Lead SC70 |
| ADM1086 | Simple Sequencers in 6-Lead SC70 |
| ADM1086AKS-REEL7 | Simple Sequencers in 6-Lead SC70 |
| ADM1087 | Simple Sequencers in 6-Lead SC70 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADM1073 | 制造商:AD 制造商全称:Analog Devices 功能描述:Full-Feature −48 V Hot Swap Controller |
| ADM1073ARU | 功能描述:IC CTRLR HOTSWAP -48V 14TSSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 热交换 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:119 系列:- 类型:热交换控制器 应用:通用型，PCI Express? 内部开关:无 电流限制:- 电源电压:3.3V，12V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:80-TQFP 供应商设备封装:80-TQFP（12x12） 包装:托盘 产品目录页面:1423 (CN2011-ZH PDF) |
| ADM1073ARU-REEL | 功能描述:IC CTRLR HOTSWAP -48V 14TSSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 热交换 系列:- 产品培训模块:Obsolescence Mitigation Program 标准包装:100 系列:- 类型:热插拔开关 应用:通用 内部开关:是 电流限制:可调 电源电压:9 V ~ 13.2 V 工作温度:-40°C ~ 150°C 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-TDFN-EP（3x3） 包装:管件 |
| ADM1073ARU-REEL7 | 制造商:Analog Devices 功能描述:Hot Swap Controller 1-CH -80V 14-Pin TSSOP T/R 制造商:Analog Devices 功能描述:FULL FEATURED -48V HOT SWAP CTRL'R I.C. - Tape and Reel |
| ADM1073ARUZ | 功能描述:IC HOTSWAP CTRLR -48V 14-TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 热交换 系列:- 标准包装:50 系列:- 类型:热交换控制器 应用:-48V 远程电力系统，AdvancedTCA ? 系统，高可用性 内部开关:无 电流限制:可调 电源电压:11.5 V ~ 14.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽） 供应商设备封装:10-MSOP 包装:管件 |
发布紧急采购，3分钟左右您将得到回复。