- 您现在的位置：买卖IC网 > PDF目录15353 > ADM2914-2ARQZ-RL7 (Analog Devices Inc)IC MONITOR 4CH UV/OV 16-QSOP PDF资料下载
参数资料
| 型号： | ADM2914-2ARQZ-RL7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 8/16页 |
| 文件大小： | 0K |
| 描述： | IC MONITOR 4CH UV/OV 16-QSOP |
| 标准包装： | 1,000 |
| 类型： | 多压监控器 |
| 监视电压数目： | 4 |
| 输出： | 开路漏极或开路集电极 |
| 复位： | 低有效 |
| 复位超时： | 最小为 6 ms |
| 电压 - 阀值： | 可调节/可选择 |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-SSOP（0.154"，3.90mm 宽） |
| 供应商设备封装： | 16-QSOP |
| 包装： | 带卷 (TR) |
ADM2914
THEORY OF OPERATION
VOLTAGE SUPERVISION
The ADM2914 supervises up to four voltage rails for overvol-
tage and undervoltage conditions. Two pins, VHx and VLx, are
assigned to monitor each rail, one for overvoltage detection and
the other for undervoltage detection. Each pin is connected to
the input of an internal voltage comparator, and its voltage level
is internally compared with a 0.5 V voltage reference with
accuracy of ±1.5%.
The output of each of the internal undervoltage comparators is
tied to a common UV output pin. Likewise, the outputs of the
internal overvoltage comparators are tied to a common OV
output pin.
Data Sheet
POLARITY CONFIGURATION
The ADM2914 is capable of monitoring supply voltages of both
positive and negative polarities. The SEL pin is a three-state pin
that determines the polarity of Input 3 and Input 4. As summa-
rized in Table 5, the SEL pin is either connected to GND, V CC ,
or left unconnected.
When an input is configured to monitor a positive voltage, using
the three-resistor scheme shown in Figure 17, VHx is connected
to the high-side tap of the resistor divider and VLx is connected
to the low-side tap of the resistor divider.
Conversely, when an input is configured to monitor a negative
voltage, UVx and OVx are swapped internally. The negative
PSU
5V
3.3V
2.5V
1.8V
VHx is still connected to the high-side tap and VLx is still
connected to the low-side tap. Within this configuration, an
undervoltage condition occurs when the monitored voltage is less
VH1
VL1
VH2
V CC
SEL
TIMER
SYSTEM
negative than the programmed threshold, and an overvoltage
condition occurs when the monitored voltage is more negative
than the configured threshold.
ADM2914
VL2
VH3
VL3
VH4
VL4
REF
UV
OV
LATCH/DIS
GND
Figure 16. Typical Applications Diagram
Table 5. Polarity Configuration
Input 3
Input 4
SEL Pin
Connected to V CC
Left Unconnected
Connected to GND
Polarity
Positive
Positive
Negative
UV Condition
VH3 < 0.5 V
VH3 < 0.5 V
VL3 > 0.5 V
OV Condition
VL3 > 0.5 V
VL3 > 0.5 V
VH3 < 0.5 V
Polarity
Positive
Negative
Negative
UV Condition
VH4 < 0.5 V
VL4 > 0.5 V
VL4 > 0.5 V
OV Condition
VL4 > 0.5 V
VH4 < 0.5 V
VH4 < 0.5 V
Rev. C | Page 8 of 16
相关PDF资料 |
PDF描述 |
|---|---|
| ADM2914-1ARQZ-RL7 | IC MONITOR 4CH UV/OV 16-QSOP |
| H2ABT-10102-W8-ND | JUMPER-H1502TR/A3048W/H1500TR 2" |
| H2ABT-10102-V8-ND | JUMPER-H1502TR/A3048V/H1500TR 2" |
| H2ABT-10102-S8-ND | JUMPER-H1502TR/A3048S/H1500TR 2" |
| HCC15DRXI-S734 | CONN EDGECARD 30POS DIP .100 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADM-2F2721010 | 制造商:JDSU 制造商全称:JDS Uniphase Corporation 功能描述:Filter Add/Drop Module 200 GHz Spacing |
| ADM-2F2721012 | 制造商:JDSU 制造商全称:JDS Uniphase Corporation 功能描述:Filter Add/Drop Module 200 GHz Spacing |
| ADM-2F2721013 | 制造商:JDSU 制造商全称:JDS Uniphase Corporation 功能描述:Filter Add/Drop Module 200 GHz Spacing |
| ADM-2F2721014 | 制造商:JDSU 制造商全称:JDS Uniphase Corporation 功能描述:Filter Add/Drop Module 200 GHz Spacing |
| ADM-2F2721015 | 制造商:JDSU 制造商全称:JDS Uniphase Corporation 功能描述:Filter Add/Drop Module 200 GHz Spacing |
发布紧急采购，3分钟左右您将得到回复。