参数资料
| 型号： | ADM3311EACPZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 24/24页 |
| 文件大小： | 0K |
| 描述： | IC TXRX RS-232 3:5 2.7V 32LFCSP |
| 标准包装： | 1 |
| 类型： | 收发器 |
| 驱动器/接收器数： | 3/5 |
| 规程： | RS232 |
| 电源电压： | 2.7 V ~ 3.6 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 32-VFQFN 裸露焊盘，CSP |
| 供应商设备封装： | 32-LFCSP-VQ（5x5） |
| 包装： | 管件 |
Data Sheet
ADM3307E/ADM3310E/ADM3311E/ADM3312E/ADM3315E
Rev. I | Page 9 of 24
Table 4. Pin Function Descriptions
Mnemonic
Function
VCC
Power Supply Input 2.7 V to 3.6 V.
V+
Internally Generated Positive Supply, 7.25 V (6.5 V Nominal for ADM3310E, ADM3315E). Capacitor C4 is connected between
VCC and V+.
V
Internally Generated Positive Supply, 7.25 V (6.5 V Nominal for ADM3310E, ADM3315E). Capacitor C5 is connected between
GND and V.
GND
Ground Pin. Must be connected to 0 V.
C1+, C1
External Capacitor 1 is connected between these pins. A 0.1 F capacitor is recommended, but larger capacitors up to 1 F
can be used.
C2+, C2
External Capacitor 2 is connected between these pins. A 0.1 F capacitor is recommended, but larger capacitors up to 1 F
can be used.
C3+, C3
External Capacitor 3 is connected between these pins. A 0.1 F capacitor is recommended, but larger capacitors up to 1 F
can be used.
TIN
Transmitter (Driver) Inputs. These inputs accept TTL/CMOS levels. An internal 400 k pull-up resistor to VCC is connected on
each input.
TOUT
Transmitter (Driver) Outputs. Typically ±5.5 V (±6.4 V for ADM3311E and ADM3312E).
RIN
Receiver Inputs. These inputs accept RS-232 signal levels. An internal 5 k pull-down resistor (22 k for ADM3315E) to GND is
connected on each of these inputs.
ROUT
Receiver Outputs. These are TTL/CMOS levels.
EN
Receiver Enable. A high level three-states all the receiver outputs.
SD
Shutdown Control. A high level disables the charge pump and reduces the quiescent current to less than 1 A. All
transmitters and most receivers are disabled. One receiver remains active in shutdown (two receivers are active in shutdown
for the ADM3310E).
For ADM3307E, ROUT3 is active in shutdown.
For ADM3310E, ROUT4 and ROUT5 are active in shutdown.
For ADM3311E, ROUT5 is active in shutdown.
For ADM3312E, ROUT3 is active in shutdown.
For ADM3315E, ROUT3 is active in shutdown.
NC
No Connect.
Table 5. ADM3307E Truth Table
SD
EN
Status
TOUT1–5
ROUT1–2
ROUT3
0
Normal Operation
Enabled
0
1
Normal Operation
Enabled
Disabled
1
0
Shutdown
Disabled
Enabled
1
Shutdown
Disabled
Table 6. ADM3310E Truth Table
SD
EN
Status
TOUT1–3
ROUT1–3
ROUT4–5
0
Normal Operation
Enabled
0
1
Receivers
Disabled
Enabled
Disabled
1
0
Shutdown
Disabled
Enabled
1
Shutdown
Disabled
Table 7. ADM3311 Truth Table
SD
EN
Status
TOUT1–3
ROUT1–4
ROUT5
0
Normal Operation
Enabled
0
1
Receivers
Disabled
Enabled
Disabled
1
0
Shutdown
Disabled
Enabled
1
Shutdown
Disabled
Table 8. ADM3312E/ADM3315E Truth Table
SD
EN
Status
TOUT1–3
ROUT1–2
ROUT3
0
Normal Operation
Enabled
0
1
Normal Operation
Enabled
Disabled
1
0
Shutdown
Disabled
Enabled
1
Shutdown
Disabled
相关PDF资料 |
PDF描述 |
|---|---|
| ADM3488EARZ | IC TXRX ESD RS-485 3.3V 8-SOIC |
| ADM3491ARU-1REEL7 | IC TXRX RS-485 HS 3.3V 16TSSOP |
| ADM3493ARZ-REEL7 | IC TXRX RS-422/485 3.3V 8-SOIC |
| ADM483EAN | IC TX/RX RS-485 LO-SLEW 5V 8DIP |
| ADM483JRZ | IC TXRX RS-485/422 5V LP 8SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADM3311EACPZ-REEL | 功能描述:IC TXRX RS-232 3:5 2.7V 32LFCSP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:121 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS422，RS485 电源电压:3 V ~ 3.6 V 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-DFN（3x3） 包装:管件 |
| ADM3311EACPZ-REEL7 | 功能描述:IC TXRX RS-232 3:5 2.7V 32LFCSP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:121 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS422，RS485 电源电压:3 V ~ 3.6 V 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-DFN（3x3） 包装:管件 |
| ADM3311EARS | 功能描述:IC TXRX RS-232 3:5 2.7V 28SSOP RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:27 系列:- 类型:收发器 驱动器/接收器数:3/3 规程:RS232，RS485 电源电压:4.75 V ~ 5.25 V 安装类型:表面贴装 封装/外壳:28-SOIC（0.295"，7.50mm 宽） 供应商设备封装:28-SOIC 包装:管件 |
| ADM3311EARSQ9 | 制造商:Analog Devices 功能描述: |
| ADM3311EARS-REEL | 功能描述:IC TXRX RS-232 3:5 2.7V 28SSOP RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:121 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS422，RS485 电源电压:3 V ~ 3.6 V 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-DFN（3x3） 包装:管件 |
发布紧急采购，3分钟左右您将得到回复。