- 您现在的位置：买卖IC网 > PDF目录10811 > ADM483EANZ (Analog Devices Inc)IC TX/RX RS-485 LO-SLEW 5V 8DIP PDF资料下载
参数资料
| 型号： | ADM483EANZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 5/16页 |
| 文件大小： | 0K |
| 描述： | IC TX/RX RS-485 LO-SLEW 5V 8DIP |
| 标准包装： | 50 |
| 类型： | 收发器 |
| 驱动器/接收器数： | 1/1 |
| 规程： | RS422，RS485 |
| 电源电压： | 4.5 V ~ 5.5 V |
| 安装类型： | 通孔 |
| 封装/外壳： | 8-DIP（0.300"，7.62mm） |
| 供应商设备封装： | 8-PDIP |
| 包装： | 管件 |
| 产品目录页面： | 790 (CN2011-ZH PDF) |
ADM483E
Rev. A | Page 13 of 16
APPLICATIONS INFORMATION
DIFFERENTIAL DATA TRANSMISSION
Differential data transmission is used to reliably transmit data at
high rates over long distances and through noisy environments.
Differential transmission nullifies the effects of ground shifts
and noise signals that appear as common-mode voltages on the
line. There are two main standards approved by the Electronics
Industries Association (EIA) that specify the electrical character-
istics of transceivers used in differential data transmission.
The RS-422 standard specifies data rates up to 10 MBaud and
line lengths up to 4000 feet. A single driver can drive a transmission
line with up to 10 receivers.
To accommodate true multipoint communications, the RS-485
standard was defined. This standard meets or exceeds all the
requirements of RS-422 and also allows for up to 32 drivers and
32 receivers to be connected to a single bus. An extended
common-mode range of 7 V to +12 V is defined. The most
significant difference between RS-422 and RS-485 is the fact
that the drivers can be disabled, thereby allowing more than one
(32, in fact) to be connected to a single line. Only one driver
should be enabled at a time, but the RS-485 standard contains
additional specifications to guarantee device safety in the event
of line contention.
CABLE AND DATA RATE
The transmission line of choice for RS-485 communications is a
twisted pair. Twisted pair cable tends to cancel common-mode
noise and also cancels the magnetic fields generated by the
current flowing through each wire, thereby reducing the
effective inductance of the pair.
A typical application showing a multipoint transmission
network is shown in Figure 26. An RS-485 transmission line can
have as many as 32 transceivers on the bus. Only one driver can
transmit at a particular time, but multiple receivers can be
enabled simultaneously.
D
R
D
RR
R
D
RT
06
01
2-
02
6
Figure 26. Typical RS-485 Network
相关PDF资料 |
PDF描述 |
|---|---|
| LTC2859CDD#PBF | IC TXRX RS485 20MBPS 10-DFN |
| LTC2854CDD#PBF | IC TXRX RS485/RS422 10-DFN |
| ADM3486EARZ | IC TXRX RS-485 3.3V HD 8-SOIC |
| LTC485CS8#PBF | IC TXRX INTRFC RS485 LOPWR 8SOIC |
| ADM3483EARZ | IC TXRX ESD RS-485 3.3V 8-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADM483EANZ | 制造商:Analog Devices 功能描述:Transceiver IC |
| ADM483EAR | 制造商:Rochester Electronics LLC 功能描述: 制造商:Analog Devices 功能描述: 制造商:Analog Devices 功能描述:TRANSCEIVER IC RS485 3.3V SO8 ((NS)) |
| ADM483EAR-1 | 制造商:Rochester Electronics LLC 功能描述: 制造商:Analog Devices 功能描述: |
| ADM483EAR-1REEL | 制造商:Rochester Electronics LLC 功能描述: 制造商:Analog Devices 功能描述: |
| ADM483EAR-REEL | 功能描述:IC TX/RX RS-485 LO-SLEW 5V 8SOIC RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:121 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS422，RS485 电源电压:3 V ~ 3.6 V 安装类型:表面贴装 封装/外壳:10-WFDFN 裸露焊盘 供应商设备封装:10-DFN（3x3） 包装:管件 |
发布紧急采购，3分钟左右您将得到回复。