参数资料
型号: ADM697ARZ-REEL
厂商: Analog Devices Inc
文件页数: 6/12页
文件大小: 0K
描述: IC SUPERVISOR MPU 16SOIC
标准包装: 1,000
类型: 备用电池电路
监视电压数目: 1
输出: 推挽式,推挽式
复位: 高有效/低有效
复位超时: 最小为 35 ms
电压 - 阀值: 1.3V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 16-SOIC(0.295",7.50mm 宽)
供应商设备封装: 16-SOIC W
包装: 带卷 (TR)
ADM696/ADM697
Table I. ADM696, ADM697 Reset Pulse Width and Watchdog Timeout Selections
Watchdog Timeout Period
Reset Active Period
OSC SEL
OSC IN
Normal
Immediately After Reset
Low
Low
Floating or High
Floating or High
External Clock Input
External Capacitor
Low
Floating or High
1024 CLKS
400 ms × C/47 pF
100 ms
1.6 s
4096 CLKS
1.6 s × C/47 pF
1.6 s
1.6 s
512 CLKS
200 ms × C/47 pF
50 ms
50 ms
NOTE
With the OSC SEL pin low, OSC IN can be driven by an external clock signal, or an external capacitor can be connected between OSC IN and GND. The nominal
internal oscillator frequency is 10.24 kHz. The nominal oscillator frequency with external capacitor is: F OSC (Hz) = 184,000/C (pF).
8
OSC SEL
WDI
ADM69x
7
OSC IN
WDO
C OSC
t 2
t 3
Figure 4b. External Capacitor
RESET
t 1
t 1
t 1
NC
8
OSC SEL
ADM69x
t 1 = RESET TIME
t 2 = NORMAL (SHORT) WATCHDOG TIMEOUT PERIOD
t 3 = WATCHDOG TIMEOUT PERIOD IMMEDIATELY FOLLOWING A RESET
NC
7
OSC IN
Figure 3. Watchdog Timeout Period and Reset Active Time
Figure 4c. Internal Oscillator (1.6 s Watchdog)
The watchdog timeout period defaults to 1.6 s and the reset
pulse width defaults to 50 ms but these times to be adjusted as
NC
8
OSC SEL
shown in Table I. Figure 4 shows the various oscillator configu-
rations which can be used to adjust the reset pulse width and
watchdog timeout period.
The internal oscillator is enabled when OSC SEL is high or
floating. In this mode, OSC IN selects between the 1.6 second
and 100 ms watchdog timeout periods. In either case, immedi-
ately after a reset the timeout period is 1.6 s. This gives the mi-
7
OSC IN
ADM69x
croprocessor time to reinitialize the system. If OSC IN is low,
then the 100 ms watchdog period becomes effective after the
first transition of WDI. The software should be written such
that the I/O port driving WDI is left in its power-up reset state
until the initialization routines are completed and the micropro-
cessor is able to toggle WDI at the minimum watchdog timeout
period of 70 ms.
Figure 4d. Internal Oscillator (100 ms Watchdog)
Watchdog Output ( WDO )
The Watchdog Output WDO provides a status output which
goes low if the watchdog timer “times out” and remains low
until set high by the next transition on the watchdog input.
WDO is also set high when LL IN goes below the reset threshold.
CLOCK
8
OSC SEL
ADM69x
0 TO 250kHz
7
OSC IN
Figure 4a. External Clock Source
–6 –
REV. 0
相关PDF资料
PDF描述
VI-2WY-EX-B1 CONVERTER MOD DC/DC 3.3V 49.5W
LTC3873ETS8-5#TRMPBF IC REG CTRLR BST FLYBK TSOT23-8
EMC18DRXS CONN EDGECARD 36POS DIP .100 SLD
H2BBT-10104-W4-ND JUMPER-H1500TR/A2015W/H1500TR 4"
EBC65DRXS CONN EDGECARD 130PS DIP .100 SLD
相关代理商/技术参数
参数描述
adm697sq 制造商:Analog Devices 功能描述: 制造商:Rochester Electronics LLC 功能描述:5V CMOS SUPERVISORS IC - Bulk
ADM698 制造商:AD 制造商全称:Analog Devices 功能描述:Microprocessor Supervisory Circuits
ADM698AN 功能描述:IC SUPERVISOR MPU 4.65V 8DIP RoHS:否 类别:集成电路 (IC) >> PMIC - 监控器 系列:- 标准包装:400 系列:- 类型:备用电池电路 监视电压数目:1 输出:开路漏极,推挽式 复位:高有效/低有效 复位超时:最小为 35 ms 电压 - 阀值:4.65V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-SOIC(0.295",7.50mm 宽) 供应商设备封装:16-SOIC W 包装:带卷 (TR) 其它名称:ADM691ARZ-REEL7TR
ADM698ANZ 功能描述:IC SUPERVISOR MPU 4.65V 8DIP RoHS:是 类别:集成电路 (IC) >> PMIC - 监控器 系列:- 其它有关文件:STM6717 View All Specifications 标准包装:1 系列:- 类型:多压监控器 监视电压数目:2 输出:开路漏极或开路集电极 复位:低有效 复位超时:最小为 600 ms 电压 - 阀值:1.11V,3.075V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SC-74A,SOT-753 供应商设备封装:SOT-23-5 包装:Digi-Reel® 产品目录页面:1194 (CN2011-ZH PDF) 其它名称:497-7019-6
ADM698AQ 制造商:AD 制造商全称:Analog Devices 功能描述:Microprocessor Supervisory Circuits