参数资料
| 型号： | ADM707AR |
| 厂商： | Analog Devices Inc |
| 文件页数： | 10/12页 |
| 文件大小： | 0K |
| 描述： | IC SUPERVISOR MPU 4.65 WD 8SOIC |
| 标准包装： | 98 |
| 类型： | 简单复位/加电复位 |
| 监视电压数目： | 1 |
| 输出： | 推挽式，推挽式 |
| 复位： | 高有效/低有效 |
| 复位超时： | 最小为 160 ms |
| 电压 - 阀值： | 4.65V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SO |
| 包装： | 管件 |
ADM705/ADM706/ADM707/ADM708
APPLICATIONS INFORMATION
A typical application circuit is shown in Figure 18. The
unregulated dc input supply is monitored using PFI via the
resistive divider network. Resistor R1 and Resistor R2 should
be selected so that when the supply voltage drops below the
desired level (such as 8 V), the voltage on PFI drops below
the 1.25 V threshold, thereby generating an interrupt to the
microprocessor. Monitoring the preregulator input provides
additional time to execute an orderly shutdown procedure
before power is lost.
MONITORING ADDITIONAL SUPPLY LEVELS
It is possible to use the power-fail comparator to monitor a
second supply as shown in Figure 20. The two sensing resistors,
R1 and R2, are selected so that the voltage on PFI drops below
1.25 V at the minimum acceptable input supply. PFO can be
connected to MR so that a reset is generated when the supply
drops out of tolerance. In this case, if either supply drops out
of tolerance, a reset is generated.
7V TO 15V
INPUT POWER
ADP3367
5V
V X
5V
V CC
R1
V CC
RESET
RESET
1.25V
–
+
PFO
RESET
R1
ADM705/
ADM706
MICROPROCESSOR
R2
PFI
ADM705/ADM706/
ADM707/ADM708
MICROPROCESSOR
R2
PFI
MR
GND
PFO
Figure 18. Typical Application Circuit
Microprocessor activity is monitored using WDI. This is driven
using an output line from the processor. The software routines
should toggle this line at least once every 1.60 seconds. If a
problem occurs and this line is not toggled, WDO goes low and
a nonmaskable interrupt is generated. This interrupt routine can be
used to clear the problem.
If, in the event of inactivity on the WDI line, a system reset
is required, WDO should be connected to MR, as shown in
Figure 20. Monitoring 5 V and an Additional Supply, V X
MICROPROCESSOR WITH BIDIRECTIONAL RESET
To prevent contention for microprocessors with a bidirectional
reset line, a current limiting resistor should be inserted between
the ADM70x RESET output pin and the microprocessor RESET
pin. This limits the current to a safe level if there are conflicting
output reset levels. A suitable resistor value is 4.7 kΩ. If the reset
output is required for other uses, it should be buffered, as shown in
RESET
ADM705/
ADM706
WDI
RESET
MICROPROCESSOR
I/O LINE
5V
V CC
BUFFERED
RESET
MR
GND
WDO
ADM70x
RESET
MICROPROCESSOR
RESET
GND
GND
Figure 19. RESET From WDO
Figure 21. Bidirectional Input/Output RESET
Rev. G | Page 10 of 12
相关PDF资料 |
PDF描述 |
|---|---|
| ADM709TAR | IC SUPERVISOR MPU 3.08V RS 8SOIC |
| ADM800MARN | IC SUPERVISOR MPU 4.40V 16SOIC |
| ADM809-5SARTZ-REEL7 | IC SUPERVISOR MPU 2.93V SOT23 |
| ADM809TART-REEL7 | IC SUPERVSR PUSHPULL 3.08V SOT23 |
| ADM811SART-REEL7 | IC SUPVSR W/RESET 2.93V SOT-143 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADM707ARM | 制造商:AD 制造商全称:Analog Devices 功能描述:Low Cost uP Supervisory Circuits |
| ADM707AR-REEL | 功能描述:IC SUPERVISOR MPU 4.65V WD 8SOIC RoHS:否 类别:集成电路 (IC) >> PMIC - 监控器 系列:- 标准包装:3,000 系列:- 类型:简单复位/加电复位 监视电压数目:1 输出:推挽式，图腾柱 复位:低有效 复位超时:最小为 140 ms 电压 - 阀值:3.08V 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:TO-236-3，SC-59，SOT-23-3 供应商设备封装:SOT-23-3 包装:带卷 (TR) |
| ADM707ARZ | 功能描述:IC SUPERVISOR MPU 4.65 WD 8SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 监控器 系列:- 标准包装:100 系列:- 类型:简单复位/加电复位 监视电压数目:1 输出:开路漏极，开路漏极 复位:高有效/低有效 复位超时:最小为 250 ms 电压 - 阀值:4.37V，4.62V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SOIC 包装:管件 产品目录页面:1337 (CN2011-ZH PDF) |
| ADM707ARZ | 制造商:Analog Devices 功能描述:Microprocessor Support IC 制造商:Analog Devices 功能描述:IC, MPU SUPERVISOR, 190 uA, 5.5V, 8-SOIC |
| ADM707ARZ-REEL | 功能描述:IC SUPERVISOR MPU 4.65V WD 8SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 监控器 系列:- 标准包装:3,000 系列:- 类型:简单复位/加电复位 监视电压数目:1 输出:推挽式，图腾柱 复位:低有效 复位超时:最小为 140 ms 电压 - 阀值:3.08V 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:TO-236-3，SC-59，SOT-23-3 供应商设备封装:SOT-23-3 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。