- 您现在的位置：买卖IC网 > PDF目录15327 > ADM8698ARN (Analog Devices Inc)IC SUPERVISOR MPU 4.65V 8SOIC PDF资料下载
参数资料
| 型号： | ADM8698ARN |
| 厂商： | Analog Devices Inc |
| 文件页数： | 4/4页 |
| 文件大小： | 0K |
| 描述： | IC SUPERVISOR MPU 4.65V 8SOIC |
| 标准包装： | 98 |
| 类型： | 简单复位/加电复位 |
| 监视电压数目： | 1 |
| 输出： | 推挽式，图腾柱 |
| 复位： | 低有效 |
| 复位超时： | 最小为 140 ms |
| 电压 - 阀值： | 4.65V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SO |
| 包装： | 管件 |
ADM8698/ADM8699
CIRCUIT INFORMATION
Power Fail RESET
A precision voltage detector monitors V CC and generates a
RESET output to hold the microprocessor’s Reset line low when
V CC falls below the reset threshold 4.65 V (see Figure 4). The
reset voltage threshold is set to accommodate a 5% variation on
V CC . The voltage detector has 40 mV hysteresis to ensure that
glitches on V CC do not activate the RESET output.
On power-up, an internal monostable holds RESET low for
140 ms after V CC rises above the reset threshold. This allows the
power supply to stabilize on power-up and also prevents repeated
toggling of RESET even if the 5 V power drops out and recovers
with each power line cycle. In order to prevent mistriggering
due to transient voltage spikes, it is recommended that a 0.1 μ F
capacitor be connected at the V CC pin.
The RESET output is guaranteed to remain low with V CC, as
low as 1 V. This holds the microprocessor in a stable shutdown
condition as the power supply comes up.
On the 16-lead SOIC package, an active high RESET output is
also provided. This is the complement of RESET and is in-
tended for microprocessors requiring an active high signal.
Watchdog Timer (ADM8699 Only)
The watchdog timer input (WDI) monitors an I/O line from the
μ P system. The μ P must toggle this input once every 1.6 sec-
onds to verify correct software execution. Failure to toggle the
line indicates that the μ P system is not correctly executing its
program and may be tied up in an endless loop. If this happens,
a reset pulse is generated to initialize the processor.
The WDI input is a three level input and will recognize a low-
to-high or high-to-low transition on its input. The watchdog
timer is reset by each WDI transition and then begins its timeout
period. If the WDI pin remains either high or low, reset pulses
will be issued every 1.6 seconds typically. If the watchdog timer
is not needed, the WDI input should be left floating.
The Watchdog Output ( WDO ) (SOIC package Only) provides
watchdog status information. It is driven low if WDI is not
toggled within the watchdog timeout period. It goes high at the
next WDI transition. It is also set high when V CC falls below the
reset threshold.
WDI
V CC
V 2
V 1
V 2
V 1
WDO
RESET
t 1
t 1
t 2
t 2
RESET
V 1 = RESET VOLTAGE THRESHOLD
V 2 = RESET VOLTAGE THRESHOLD +
t 1
t 1
t 1
THRESHOLD HYSTERESIS
t 1 = RESET TIME
Figure 4. Watchdog Timeout Period vs. Temperature
t 1 = RESET TIME
t 2 = WATCHDOG TIME OUT PERIOD
Figure 5. Watchdog Timeout Period and Reset Active Time
OUTLINE DIMENSIONS
Dimensions shown in inches and (mm).
8-Pin Plastic DIP (N-8)
8-Pin SOIC (R-8)
0.1968 (5.00)
0.1890 (4.80)
16-Lead SOIC (R-16)
PIN 1
8
5
0.25
0.31
0.2440 (6.20)
8
5
0.1574 (4.00)
16
9
1
4
(6.35) (7.87)
0.2284 (5.80)
1
4
0.1497 (3.80)
0.299
(7.60)
0.419
(10.65)
0.430 (10.92)
MAX
0.035
(0.89)
PIN 1
0.102 (2.59)
0.094 (2.39)
1
8
SEATING (1.27)
0.18 (4.57)
0.018 (0.46)
0.125
(3.18)
MIN
SEATING
0.0098 (0.25)
0.0040 (0.10)
PLANE BSC
0.0500 0.0192 (0.49)
0.0138 (0.35)
0.012
(0.3)
0.413 (10.50)
0.104
(2.65)
0.1 (2.54)
PLANE
BSC
0.033 (0.84)
0.0196 (0.50)
0.0099 (0.25)
x 45 °
0.05 (1.27)
REF
0.019 (0.49)
0.011
(0.28)
0.3 (7.62)
0.18
(4.57)
MAX
0.0098 (0.25)
0.0075 (0.19)
8 °
0 °
0.0500 (1.27)
0.0160 (0.41)
0.030
(0.75)
0.013
(0.32)
0.042
(1.07)
–4 –
REV. 0
相关PDF资料 |
PDF描述 |
|---|---|
| VI-JWP-EW-F4 | CONVERTER MOD DC/DC 13.8V 100W |
| H2BXT-10112-R4-ND | JUMPER-H1500TR/A2015R/X 12" |
| VI-JWP-EW-F3 | CONVERTER MOD DC/DC 13.8V 100W |
| VI-JWN-EW-F3 | CONVERTER MOD DC/DC 18.5V 100W |
| H2BXT-10112-N4-ND | JUMPER-H1500TR/A2015N/X 12" |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADM8698ARN-REEL | 制造商:Analog Devices 功能描述:Processor Supervisor 4.65V 3V to 5.5V 8-Pin SOIC N T/R 制造商:Analog Devices 功能描述:IMPROVED ADM698 - Tape and Reel 制造商:Rochester Electronics LLC 功能描述:IMPROVED ADM698 - Tape and Reel |
| ADM8698ARNZ | 制造商:Analog Devices 功能描述:Processor Supervisor 4.65V 3V to 5.5V 8-Pin SOIC N 制造商:Analog Devices 功能描述:Microprocessor Supervisor |
| ADM8698ARW | 制造商:Analog Devices 功能描述:PROCESSOR SUPERVISOR 4.65V 100UA 16SOIC W - Rail/Tube |
| ADM8698ARW-REEL | 制造商:Analog Devices 功能描述:Processor Supervisor 4.65V 3V to 5.5V 16-Pin SOIC W T/R 制造商:Analog Devices 功能描述:PROCESSOR SUPERVISOR 4.65V 100UA 16SOIC W - Tape and Reel |
| ADM8699 | 制造商:AD 制造商全称:Analog Devices 功能描述:Microprocessor Supervisory Circuits |
发布紧急采购，3分钟左右您将得到回复。