参数资料
型号: ADN2816ACPZ-RL7
厂商: Analog Devices Inc
文件页数: 5/24页
文件大小: 0K
描述: IC CLK/DATA REC 675MBPS 32-LFCSP
标准包装: 1,500
类型: 时钟和数据恢复(CDR),多路复用器
PLL:
主要目的: SONET/SDH
输入: CML
输出: LVDS
电路数: 1
比率 - 输入:输出: 1:2
差分 - 输入:输出: 是/是
频率 - 最大: 675MHz
电源电压: 3 V ~ 3.6 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 32-VFQFN 裸露焊盘,CSP
供应商设备封装: 32-LFCSP-VQ(5x5)
包装: 带卷 (TR)
Data Sheet
ADN2816
Rev. C | Page 13 of 24
At medium jitter frequencies, the gain and tuning range of the
VCO are not large enough to track input jitter. In this case, the
VCO control voltage becomes large and saturates, and the VCO
frequency dwells at one extreme of its tuning range or at the
other. The size of the VCO tuning range, therefore, has only a
small effect on the jitter accommodation. The delay-locked loop
control voltage is now larger, and therefore the phase shifter
takes on the burden of tracking the input jitter. The phase
shifter range, in UI, can be seen as a broad plateau on the jitter
tolerance curve. The phase shifter has a minimum range of 2 UI
at all data rates.
The gain of the loop integrator is small for high jitter
frequencies; therefore, larger phase differences are needed to
make the loop control voltage large enough to tune the range of
the phase shifter. Large phase errors at high jitter frequencies
cannot be tolerated. In this region, the gain of the integrator
determines the jitter accommodation. Because the gain of the
loop integrator declines linearly with frequency, jitter accom-
modation is lower with higher jitter frequency. At the highest
frequencies, the loop gain is very small, and little tuning of the
phase shifter can be expected. In this case, jitter accommodation is
determined by the eye opening of the input data, the static
phase error, and the residual loop jitter generation. The jitter
accommodation is roughly 0.5 UI in this region. The corner
frequency between the declining slope and the flat region is
the closed loop bandwidth of the delay-locked loop, which is
roughly 1.0 MHz at 675 Mb/s.
相关PDF资料
PDF描述
VE-JTZ-EY-F3 CONVERTER MOD DC/DC 2V 20W
ADN2804ACPZ-500RL7 IC CLK/DATA REC 622MBPS 32-LFCSP
VE-JTZ-EY-F2 CONVERTER MOD DC/DC 2V 20W
MS3126E22-55P CONN PLUG 55POS STRAIGHT W/PINS
VE-JTZ-EY-F1 CONVERTER MOD DC/DC 2V 20W
相关代理商/技术参数
参数描述
ADN2816XCPZ 制造商:AD 制造商全称:Analog Devices 功能描述:Continuous Rate 12.3 Mb/s to 675 Mb/s Clock and Data Recovery IC
ADN2817 制造商:AD 制造商全称:Analog Devices 功能描述:Continuous Rate 12.3Mb/s to 2.7Gb/s Clock and Data Recovery ICs
ADN2817ACPZ 功能描述:IC CLOCK/DATA RECOVERY 32-LFCSP RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 专用 系列:- 标准包装:1 系列:- 类型:时钟/频率发生器,多路复用器 PLL:是 主要目的:存储器,RDRAM 输入:晶体 输出:LVCMOS 电路数:1 比率 - 输入:输出:1:2 差分 - 输入:输出:无/是 频率 - 最大:400MHz 电源电压:3 V ~ 3.6 V 工作温度:0°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-TSSOP(0.173",4.40mm 宽) 供应商设备封装:16-TSSOP 包装:Digi-Reel® 其它名称:296-6719-6
ADN2817ACPZ-RL 制造商:AD 制造商全称:Analog Devices 功能描述:Continuous Rate 10 Mbps to 2.7 Gbps Clock and Data Recovery ICs
ADN2817ACPZ-RL7 功能描述:IC CLOCK/DATA RECOVERY 32-LFCSP RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 专用 系列:- 标准包装:28 系列:- 类型:时钟/频率发生器 PLL:是 主要目的:Intel CPU 服务器 输入:时钟 输出:LVCMOS 电路数:1 比率 - 输入:输出:3:22 差分 - 输入:输出:无/是 频率 - 最大:400MHz 电源电压:3.135 V ~ 3.465 V 工作温度:0°C ~ 85°C 安装类型:表面贴装 封装/外壳:64-TFSOP (0.240",6.10mm 宽) 供应商设备封装:64-TSSOP 包装:管件