参数资料
| 型号： | ADP151ACBZ-1.1-R7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 1/24页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO 1.1V .2A 4WLCSP |
| 产品变化通告： | 8mm Carrier Tape Changes 28/Feb/2012 |
| 标准包装： | 3,000 |
| 稳压器拓扑结构： | 正，固定式 |
| 输出电压： | 1.1V |
| 输入电压： | 2.2 V ~ 5.5 V |
| 稳压器数量： | 1 |
| 电流 - 输出： | 200mA（最小值） |
| 电流 - 限制（最小）： | 220mA |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 4-WFBGA，WLCSP |
| 供应商设备封装： | 4-WLCSP（0.76x0.76） |
| 包装： | 带卷 (TR) |
Ultralow Noise, 200 mA,
CMOS Linear Regulator
Data Sheet
FEATURES
TYPICAL APPLICATION CIRCUIT
Ultralow noise: 9 μV rms
No noise bypass capacitor required
V IN = 2.3V
1μF
1
VIN
VOUT 5
V OUT = 1.8V
1μF
Stable with 1 μF ceramic input and output capacitors
2
GND
Maximum output current: 200 mA
ON
3
EN
NC 4
Input voltage range: 2.2 V to 5.5 V
Low quiescent current
I GND = 10 μA with 0 load
OFF
NC = NO CONNECT
Figure 1. TSOT ADP151 with Fixed Output Voltage, 1.8 V
I GND = 265 μA with 200 mA load
Low shutdown current: <1 μA
Low dropout voltage: 140 mV at 200 mA load
Initial accuracy: ±1%
V IN = 2.3V
C IN
1 2
VIN VOUT
TOP VIEW
A
V OUT = 1.8V
C OUT
1μF
Accuracy over line, load, and temperature: ±2.5%
16 fixed output voltage options: 1.1 V to 3.3 V
OFF
ON
(Not to Scale)
EN GND
B
PSRR performance of 70 dB at 10 kHz
Current-limit and thermal overload protection
Logic controlled enable
Figure 2. WLCSP ADP151 with Fixed Output Voltage, 1.8 V
Internal pull-down resistor on EN input
V IN = 2.3V
6
VIN
VOUT
1
V OUT = 1.8V
TOP VIEW NC
5-lead TSOT package
6-lead LFCSP package
4-ball, 0.4 mm pitch WLCSP
OFF
1μF
ON
5
4
ADP151
NC
(Not to Scale)
EN GND
2
3
1μF
APPLICATIONS
RF, VCO, and PLL power supplies
Mobile phones
Digital camera and audio devices
Portable and battery-powered equipment
Post dc-to-dc regulation
Portable medical devices
GENERAL DESCRIPTION
The ADP151 is an ultralow noise, low dropout linear regulator
that operates from 2.2 V to 5.5 V and provides up to 200 mA
of output current. The low 140 mV dropout voltage at 200 mA
load improves efficiency and allows operation over a wide input
voltage range.
Using an innovative circuit topology, the ADP151 achieves
ultralow noise performance without the necessity of a bypass
capacitor, making it ideal for noise-sensitive analog and RF
applications. The ADP151 also achieves ultralow noise per-
formance without compromising PSRR or transient line and
load performance. The low 265 μA of quiescent current at
200 mA load makes the ADP151 suitable for battery-operated
portable equipment.
The ADP151 also includes an internal pull-down resistor on the
EN input.
Rev. E
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
NC = NO CONNECT. DO NOT
CONNECT TO THIS PIN.
Figure 3. LFCSP ADP151 with Fixed Output Voltage, 1.8 V
The ADP151 is specifically designed for stable operation with
tiny 1 μF, ±30% ceramic input and output capacitors to meet
the requirements of high performance, space constrained
applications.
The ADP151 is capable of 16 fixed output voltage options,
ranging from 1.1 V to 3.3 V.
Short-circuit and thermal overload protection circuits prevent
damage in adverse conditions. The ADP151 is available in tiny
5-lead TSOT, 6-lead LFCSP, and 4-ball, 0.4 mm pitch, halide-free
WLCSP packages for the smallest footprint solution to meet a
variety of portable power application requirements.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 ?2010–2012 Analog Devices, Inc. All rights reserved.
相关PDF资料 |
PDF描述 |
|---|---|
| ADP151ACBZ-2.6-R7 | IC REG LDO 2.6V .2A 4WLCSP |
| HSM25DSEN | CONN EDGECARD 50POS .156 EYELET |
| HMM25DSEN | CONN EDGECARD 50POS .156 EYELET |
| HSM25DSEH | CONN EDGECARD 50POS .156 EYELET |
| HMM25DSEH | CONN EDGECARD 50POS .156 EYELET |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADP151ACBZ-2.1-R7 | 功能描述:IC REG LDO 2.1V .2A 4WLCSP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:75 系列:- 稳压器拓扑结构:正，可调式 输出电压:1.2 V ~ 37 V 输入电压:4.2 V ~ 40 V 电压 - 压降（标准）:- 稳压器数量:1 电流 - 输出:500mA 电流 - 限制（最小）:500mA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:TO-252-3，DPak（2 引线+接片），SC-63 供应商设备封装:TO-252-3 包装:管件 产品目录页面:1286 (CN2011-ZH PDF) 其它名称:*LM317AMDT/NOPBLM317AMDT |
| ADP151ACBZ-2.5-R7 | 功能描述:IC REG LDO 2.5V .2A 4WLCSP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:3,000 系列:- 稳压器拓扑结构:正，固定式 输出电压:3V 输入电压:最高 5.5V 电压 - 压降（标准）:0.12V @ 150mA 稳压器数量:1 电流 - 输出:150mA（最小值） 电流 - 限制（最小）:220mA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:SOT-23-5 细型，TSOT-23-5 供应商设备封装:TSOT-23-5 包装:带卷 (TR) 其它名称:ADP160AUJZ-3.0-R7TR |
| ADP151ACBZ-2.6-R7 | 功能描述:IC REG LDO 2.6V .2A 4WLCSP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 其它有关文件:LD39015JXX12 View All Specifications 标准包装:1 系列:- 稳压器拓扑结构:正，固定式 输出电压:1.2V 输入电压:1.5 V ~ 5.5 V 电压 - 压降（标准）:- 稳压器数量:1 电流 - 输出:150mA 电流 - 限制（最小）:- 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:4-WFBGA，FCBGA 供应商设备封装:4-覆晶（1.07x1.07） 包装:Digi-Reel® 其它名称:497-11958-6 |
| ADP151ACBZ-2.75-R7 | 功能描述:IC REG LDO 2.75V .2A 4WLCSP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:75 系列:- 稳压器拓扑结构:正，可调式 输出电压:1.2 V ~ 37 V 输入电压:4.2 V ~ 40 V 电压 - 压降（标准）:- 稳压器数量:1 电流 - 输出:500mA 电流 - 限制（最小）:500mA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:TO-252-3，DPak（2 引线+接片），SC-63 供应商设备封装:TO-252-3 包装:管件 产品目录页面:1286 (CN2011-ZH PDF) 其它名称:*LM317AMDT/NOPBLM317AMDT |
| ADP151ACBZ-2.85-R7 | 功能描述:IC REG LDO 2.85V .2A 4WLCSP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:75 系列:- 稳压器拓扑结构:正，可调式 输出电压:1.2 V ~ 37 V 输入电压:4.2 V ~ 40 V 电压 - 压降（标准）:- 稳压器数量:1 电流 - 输出:500mA 电流 - 限制（最小）:500mA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:TO-252-3，DPak（2 引线+接片），SC-63 供应商设备封装:TO-252-3 包装:管件 产品目录页面:1286 (CN2011-ZH PDF) 其它名称:*LM317AMDT/NOPBLM317AMDT |
发布紧急采购，3分钟左右您将得到回复。