参数资料
| 型号： | ADP1610ARMZ-R7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 17/20页 |
| 文件大小： | 0K |
| 描述： | IC REG BOOST ADJ 1.2A 8MSOP |
| 产品培训模块： | Fully Isolated ADM3251E RS-232 Transceiver |
| 标准包装： | 1 |
| 类型： | 升压（升压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 可调至 12V |
| 输入电压： | 2.5 V ~ 5.5 V |
| PWM 型： | 电流模式 |
| 频率 - 开关： | 700kHz，1.23MHz |
| 电流 - 输出： | 1.2A |
| 同步整流器： | 无 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 包装： | 标准包装 |
| 供应商设备封装： | 8-MSOP |
| 产品目录页面： | 791 (CN2011-ZH PDF) |
| 其它名称： | ADP1610ARMZ-R7DKR |
ADP1610
LAYOUT PROCEDURE
To get high efficiency, good regulation, and stability, a well-
designed PCB layout is required. Where possible, use the
sample application board layout as a model.
When designing PCBs the following guidelines are to be used
(see Figure 2):
?
?
?
?
?
The low ESR input capacitor (C IN ) is to be kept close to IN
and GND.
The high current path from C IN through the inductor L1 to
SW and PGND is to be kept as short as possible.
The high current path from C IN through L1, the rectifier
D1, and the output capacitor C OUT is to be kept as short as
possible.
High current traces are to be kept as short and as wide as
possible.
The feedback resistors are to be placed as close to the FB
pin as possible to prevent noise pickup.
?
?
The compensation components are to be placed as close as
possible to COMP.
To prevent radiated noise injection, high impedance traces
Figure 32. Sample Application Board (Top Layer)
are not to be routed near any node connected to SW or
near the inductor.
Figure 33. Sample Application Board (Silkscreen Layer)
Figure 31. Sample Application Board (Bottom Layer)
Rev. A | Page 17 of 20
相关PDF资料 |
PDF描述 |
|---|---|
| ADP1611ARMZ-R7 | IC REG BOOST ADJ 1.2A 8MSOP |
| ADP1613ARMZ-R7 | IC REG BOOST SEPIC ADJ 2A 8MSOP |
| ADP1614ACPZ-650-R7 | IC REG BOOST ADJ 4A 10LFCSP |
| ADP1621ARMZ-R7 | IC REG CTRLR PWM CM 10-MSOP |
| ADP1707ARDZ-1.8-R7 | IC REG LDO 1.8V 1A 8-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADP1610-BL1-EVZ | 制造商:Analog Devices 功能描述:Evaluation Board For Step-Up DC-DC Converter 制造商:Analog Devices 功能描述:BLANK ADISIMPOWER EVAL ADP1610 - Boxed Product (Development Kits) |
| ADP1610-EVALZ | 功能描述:BOARD EVALUATION FOR ADP1610 RoHS:是 类别:编程器，开发系统 >> 评估板 - DC/DC 与 AC/DC（离线）SMPS 系列:- 标准包装:1 系列:- 主要目的:DC/DC，步降 输出及类型:1，非隔离 功率 - 输出:- 输出电压:3.3V 电流 - 输出:3A 输入电压:4.5 V ~ 28 V 稳压器拓扑结构:降压 频率 - 开关:250kHz 板类型:完全填充 已供物品:板 已用 IC / 零件:L7981 其它名称:497-12113STEVAL-ISA094V1-ND |
| ADP1611 | 制造商:AD 制造商全称:Analog Devices 功能描述:Constant-Frequency, Current-Mode Step-Up DC/DC Controller |
| ADP1611ARMZ-R7 | 功能描述:IC REG BOOST ADJ 1.2A 8MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:20 系列:SIMPLE SWITCHER® 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:12V 输入电压:4 V ~ 60 V PWM 型:电压模式 频率 - 开关:52kHz 电流 - 输出:1A 同步整流器:无 工作温度:-40°C ~ 125°C 安装类型:通孔 封装/外壳:16-DIP（0.300"，7.62mm） 包装:管件 供应商设备封装:16-DIP 其它名称:*LM2575HVN-12LM2575HVN-12 |
| ADP1611-EVAL | 制造商:AD 制造商全称:Analog Devices 功能描述:20 V,1.2 MHz Step-Up DC-to-DC Switching Converter |
发布紧急采购，3分钟左右您将得到回复。