- 您现在的位置：买卖IC网 > PDF目录16945 > ADP170-1.8-EVALZ (Analog Devices Inc)BOARD EVAL ADP170 1.8V PDF资料下载
参数资料
| 型号： | ADP170-1.8-EVALZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 12/20页 |
| 文件大小： | 0K |
| 描述： | BOARD EVAL ADP170 1.8V |
| 标准包装： | 1 |
| 每 IC 通道数： | 1 - 单 |
| 输出电压： | 1.8V |
| 电流 - 输出： | 300mA |
| 输入电压： | 1.6 ~ 3.6V |
| 稳压器类型： | 正，固定式 |
| 工作温度： | -40°C ~ 85°C |
| 板类型： | 完全填充 |
| 已供物品： | 板 |
| 已用 IC / 零件： | ADP170 |
ADP170/ADP171
APPLICATIONS INFORMATION
CAPACITOR SELECTION
Output Capacitor
The ADP170 / ADP171 are designed for operation with small,
space-saving ceramic capacitors but will function with most
commonly used capacitors as long as care is taken with regard
to the effective series resistance (ESR) value. The ESR of the
output capacitor affects the stability of the LDO control loop.
A minimum of 1 μF capacitance with an ESR of 1 Ω or less is
recommended to ensure stability of the ADP170 / ADP171 . The
transient response to changes in load current is also affected by
output capacitance. Using a larger value of output capacitance
improves the transient response of the ADP170 / ADP171 to
large changes in load current. Figure 27 and Figure 28 show the
transient responses for output capacitance values of 1 μF and
4.7 μF, respectively.
I LOAD
1mA TO 300mA LOAD STEP,
2.5A/μs
1
2
Data Sheet
Input Bypass Capacitor
Connecting a 1 μF capacitor from VIN to GND reduces the
circuit sensitivity to the printed circuit board (PCB) layout,
especially when long input traces or high source impedance
are encountered. If greater than 1 μF of output capacitance is
required, the input capacitor should be increased to match it.
Input and Output Capacitor Properties
Any good quality ceramic capacitor can be used with the
and maximum ESR requirements. Ceramic capacitors are manu-
factured with a variety of dielectrics, each with different behavior
over temperature and applied voltage. Capacitors must have a
dielectric adequate to ensure the minimum capacitance over the
necessary temperature range and dc bias conditions. A X5R or X7R
dielectric with a voltage rating of 6.3 V or 10 V is recommended.
The Y5V and Z5U dielectrics are not recommended, due to their
poor temperature and dc bias characteristics.
of a 0402, 1 μF, 10 V X5R capacitor. The variance of a capacitor
is strongly influenced by the capacitor size and voltage rating. In
general, a capacitor in a larger package or higher voltage rating
will exhibit less capacitance variance over bias voltage. The
temperature variation of the X5R dielectric is about ±15% over
V OUT
V OUT = 1.8V
C IN = C OUT = 1μF
the ?40°C to +85°C temperature range and is not a function of
package or voltage rating.
1.2
W
CH1 200mA ? CH2 50.0mV
B
M200ns A CH1
T 500.000ns
112mA
1.0
Figure 27. Output Transient Response, C OUT = 1 μF
0.8
1
I LOAD
1mA TO 300mA LOAD STEP,
2.5A/μs
0.6
0.4
0.2
2
V OUT
0
0
2
4 6
BIAS VOLTAGE (V)
8
10
CH1 200mA ? CH2 50.0mV
M200ns A CH1
108mA
W
V OUT = 1.8V
C IN = C OUT = 4.7μF
B
T 500.000ns
Figure 28. Output Transient Response, C OUT = 4.7 μF
Figure 29. Capacitance vs. Bias Voltage Characteristics
Use Equation 1 to determine the worst-case capacitance
accounting for capacitor variation over temperature,
component tolerance, and voltage.
C EFF = C BIAS × (1 ? TEMPCO ) × (1 ? TOL )
where:
C BIAS is the effective capacitance at the operating voltage.
TEMPCO is the worst-case capacitor temperature coefficient.
TOL is the worst-case component tolerance.
Rev. C | Page 12 of 20
(1)
相关PDF资料 |
PDF描述 |
|---|---|
| ADP171-EVALZ | BOARD EVAL ADP171 1V |
| VE-JVM-EY | CONVERTER MOD DC/DC 10V 50W |
| VI-24L-EY | CONVERTER MOD DC/DC 28V 50W |
| CBC2012T220M | INDUCTOR 22UH 20% 0805 SMD |
| 8-1589455-6 | WDUALOBE CONNECTOR |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADP1706 | 制造商:AD 制造商全称:Analog Devices 功能描述:1 A, Low Dropout, CMOS Linear Regulator |
| ADP1706-3.3-EVALZ | 功能描述:BOARD EVAL FOR ADP1706 3.3V RoHS:是 类别:编程器，开发系统 >> 评估板 - 线性稳压器 (LDO) 系列:- 产品变化通告:1Q2012 Discontinuation 30/Mar/2012 设计资源:NCP590MNDPTAGEVB Gerber Files 标准包装:1 系列:- 每 IC 通道数:2 - 双 输出电压:1.8V，2.8V 电流 - 输出:300mA 输入电压:2.1 ~ 5.5 V 稳压器类型:正，固定式 工作温度:-40°C ~ 85°C 板类型:完全填充 已供物品:板 已用 IC / 零件:NCP590MNDP 其它名称:NCP590MNDPTAGEVB-NDNCP590MNDPTAGEVBOS |
| ADP1706ACPZ-0.75R7 | 功能描述:IC REG LDO 0.75V 1A 8-LFCSP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:- 稳压器拓扑结构:正，固定式 输出电压:3.3V 输入电压:2.5 V ~ 5.5 V 电压 - 压降（标准）:0.1V @ 200mA 稳压器数量:2 电流 - 输出:300mA 电流 - 限制（最小）:350mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-UFQFN 供应商设备封装:8-MLPQ-UT（1.5x1.5） 包装:剪切带 (CT) 产品目录页面:1358 (CN2011-ZH PDF) 其它名称:SC560HULCT |
| ADP1706ACPZ-0.85R7 | 功能描述:IC REG LDO 0.85V 1A 8-LFCSP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:- 稳压器拓扑结构:正，固定式 输出电压:3.3V 输入电压:2.5 V ~ 5.5 V 电压 - 压降（标准）:0.1V @ 200mA 稳压器数量:2 电流 - 输出:300mA 电流 - 限制（最小）:350mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-UFQFN 供应商设备封装:8-MLPQ-UT（1.5x1.5） 包装:剪切带 (CT) 产品目录页面:1358 (CN2011-ZH PDF) 其它名称:SC560HULCT |
| ADP1706ACPZ-0.8-R7 | 功能描述:IC REG LDO 0.8V 1A 8-LFCSP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:- 稳压器拓扑结构:正，固定式 输出电压:3.3V 输入电压:2.5 V ~ 5.5 V 电压 - 压降（标准）:0.1V @ 200mA 稳压器数量:2 电流 - 输出:300mA 电流 - 限制（最小）:350mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-UFQFN 供应商设备封装:8-MLPQ-UT（1.5x1.5） 包装:剪切带 (CT) 产品目录页面:1358 (CN2011-ZH PDF) 其它名称:SC560HULCT |
发布紧急采购，3分钟左右您将得到回复。