参数资料
| 型号： | ADP5587ACPZ-R7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 2/24页 |
| 文件大小： | 0K |
| 描述： | IC EXPANDER/KEYBOARD CTRLR |
| 标准包装： | 1 |
| 类型： | I²C 端口扩展器 |
| 应用： | 移动电话 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-WFQFN 裸露焊盘，CSP |
| 供应商设备封装： | 24-LFCSP-WQ（4x4） |
| 包装： | 标准包装 |
| 产品目录页面： | 799 (CN2011-ZH PDF) |
| 配用： | ADP5587CP-EVALZ-ND - EVAL BOARD FOR ADP5587 |
| 其它名称： | ADP5587ACPZ-R7DKR |
ADP5587
Data Sheet
Rev. D | Page 10 of 24
Auto-Increment
The ADP5587 features automatic increment during I2C read
access, which allows the user to increment the address pointer
without the need to send a read command for subsequent
addresses. This minimizes processor intervention and, therefore,
saves processor bandwidth and current drain. Bit 7 of Register 0x01
must be set to initiate auto-increment (see Figure 17 for the full
write and read sequence).
Key Event Interrupt
On a key event (KE) interrupt, the processor reads the interrupt
status register to determine the cause of the interrupt. If the
KE_INT bit in Register 0x02 is set, the processor reads the key
event count from the KEC [3:0] field in Register 0x03 to determine
the number of events. After reading all the events from the
FIFO, it then reads the KEC field again (in Register 0x03) to
make sure that no new events have come in. After all the events
are read, the KEC field is decremented to zero (KEC = 0), and
the KE_INT bit can be cleared by writing a 1 to it. Both key
presses and key releases are capable of generating key event
interrupts. The KE_INT bit cannot be cleared, and the INT pin
cannot be deasserted, until the FIFO is cleared of all events.
KEYPAD MODE
KEC
REG. 0x1D
THROUGH REG. 0x1F
REG. 0x03
READ KE(s) TO CLEAR
INT DRIVE
KE_INT
REG. 0x02
WRITE 1 TO CLEAR
KE_IEN
REG. 0x01
AND
08612-
007
Figure 11. Key Event Interrupt Generation
START
MASK TIMER = 0
KEY PRESS
DETECTED
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
GENERATE
KE INTERRUPT
START MASK TIMER
MASK TIMER
EXPIRES
MASK TIMER
EXPIRES
GENERATE
KEYLOCK INTERRUPT
FIRST UNLOCK
KEY DETECTED
SECOND UNLOCK
KEY DETECTED
START UNLOCK1 TO UNLOCK2
UNLOCK1 TO
UNLOCK2
TIMER EXPIRES
KEY PRESS
DETECTED
START UNLOCK1 TO UNLOCK2
FIRST UNLOCK
KEY DETECTED
GENERATE
KEYLOCK INTERRUPT
SECOND UNLOCK
KEY DETECTED
UNLOCK1 TO
UNLOCK2
TIMER EXPIRES
NO
08612-
008
Figure 12. Keypad Lock Interrupt Mask Timer Flowchart
相关PDF资料 |
PDF描述 |
|---|---|
| LFXP3E-4TN144C | IC FPGA 3.1KLUTS 100I/O 144-TQFP |
| LFXP3C-4TN144C | IC FPGA 3.1KLUTS 100I/O 144-TQFP |
| FMC15DRYN-S93 | CONN EDGECARD 30POS .100 DIP SLD |
| LFXP3C-4T144C | IC FPGA 3.1KLUTS 100I/O 144-TQFP |
| LFXP3C-3TN144I | IC FPGA 3.1KLUTS 100I/O 144-TQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADP5587CP-EVALZ | 功能描述:EVAL BOARD FOR ADP5587 RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:- 主要目的:电信，线路接口单元（LIU） 嵌入式:- 已用 IC / 零件:IDT82V2081 主要属性:T1/J1/E1 LIU 次要属性:- 已供物品:板，电源，线缆，CD 其它名称:82EBV2081 |
| ADP5588 | 制造商:AD 制造商全称:Analog Devices 功能描述:Keypad I/O Expander |
| ADP5588ACPZ-R7 | 功能描述:IC KEYPAD SCANNER GPIO PORT EXP RoHS:是 类别:集成电路 (IC) >> 接口 - 专用 系列:- 特色产品:NXP - I2C Interface 标准包装:1 系列:- 应用:2 通道 I²C 多路复用器 接口:I²C，SM 总线 电源电压:2.3 V ~ 5.5 V 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:剪切带 (CT) 安装类型:表面贴装 产品目录页面:825 (CN2011-ZH PDF) 其它名称:568-1854-1 |
| ADP5588ACPZ-R7B2 | 功能描述:Keypads and Alarm Systems Interface 24-LFCSP-WQ (4x4) 制造商:analog devices inc. 系列:- 包装:带卷（TR） 零件状态:上次购买时间 应用:键盘和警报系统 接口:I2C 电压 - 电源:1.8 V ~ 3 V 封装/外壳:24-WFQFN 裸露焊盘，CSP 供应商器件封装:24-LFCSP-WQ（4x4） 安装类型:表面贴装 标准包装:1 |
| ADP5588-EVALZ | 功能描述:BOARD EVAL ADP5588 KEYPAD/GPIO RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:- 主要目的:电信，线路接口单元（LIU） 嵌入式:- 已用 IC / 零件:IDT82V2081 主要属性:T1/J1/E1 LIU 次要属性:- 已供物品:板，电源，线缆，CD 其它名称:82EBV2081 |
发布紧急采购，3分钟左右您将得到回复。