- 您现在的位置：买卖IC网 > PDF目录67357 > ADRF6604ACPZ-R7 (ANALOG DEVICES INC) 2500 MHz - 2900 MHz RF/MICROWAVE DOUBLE BALANCED MIXER PDF资料下载
参数资料
| 型号： | ADRF6604ACPZ-R7 |
| 厂商： | ANALOG DEVICES INC |
| 元件分类： | 混频器 |
| 英文描述： | 2500 MHz - 2900 MHz RF/MICROWAVE DOUBLE BALANCED MIXER |
| 封装： | 6 X 6 MM, ROHS COMPLIANT, MO-220VJJD2, LFCSP_VQ, CP-40 |
| 文件页数： | 15/24页 |
| 文件大小： | 714K |
| 代理商： | ADRF6604ACPZ-R7 |
ADRF6604
Rev. 0 | Page 22 of 2
4
EVALUATION BOARD CONFIGURATION OPTIONS
Table 10.
Component
Description
Default Condition/
Option Settings
S1, R55, R56, R33
LO select. Switch and resistors to ground the LODRV_EN pin. The LODRV_EN pin setting, in
combination with the internal register settings, determines whether the LOP and LON pins
function as inputs or outputs (see the LO Selection Logic section for more information).
S1 = R55 = open
(not installed)
R56 = R33 = 0 Ω
LODRV_EN = 0 V
LO IN/OUT
SMA Connector
LO input/output. An external 1× LO or 2× LO frequency can be applied to this single-ended
input connector.
LO input
REFIN
SMA Connector
Reference input. The input reference frequency for the PLL is applied to this connector.
Input impedance is 50 Ω.
REFOUT
SMA Connector
Multiplexer output. The REFOUT connector connects directly to the MUXOUT pin. The
on-board multiplexer can be programmed to bring out the following signals:
REF_IN, 2 × REF_IN, 0.5 × REF_IN, 0.25 × REF_IN.
Temperature sensor output voltage.
Lock detect indicator.
Lock detect
CP Test Point
Charge pump test point. The unfiltered charge pump signal can be probed at this test
point. Note that the CP pin should not be probed during critical measurements, such as
phase noise.
R37, C14, R9, R10,
C15, C13, R65, C40
Loop filter. Loop filter components.
R11, R12
Loop filter return. When the internal VCO is used, the loop filter components should be
returned to Pin 40 (DECLVCO) by installing a 0 Ω resistor in R12. When an external VCO is used,
the loop filter components can be returned to ground by installing a 0 Ω resistor in R11.
R12 = 0 Ω (0402)
R11 = open (0402)
R62, R63, VTUNE
SMA Connector
Internal vs. external VCO. When the internal VCO is enabled, the loop filter components are
connected directly to the VTUNE pin (Pin 39) by installing a 0 Ω resistor in R62.
To use an external VCO, R62 should be left open. A 0 Ω resistor should be installed in R63,
and the voltage input of the VCO should be connected to the VTUNE SMA connector. The
output of the VCO is brought back into the PLL via the LO IN/OUT SMA connector.
R62 = 0 Ω (0402)
R63 = open (0402)
R2
Connects to RSET pin. This pin is unused and should be left open.
R2 = open (0402)
RFIN SMA Connector
RF input. The RF input signal should be applied to the RFIN SMA connector. The RF input of
the ADRF6604 is ac-coupled; therefore, no bias is necessary.
T3
IF output. The differential IF output signals from the ADRF6604 (IFP and IFN) are converted
to a single-ended signal by T3.
相关PDF资料 |
PDF描述 |
|---|---|
| ADRF6801ACPZ-R7 | 750 MHz - 1150 MHz RF/MICROWAVE I/Q DEMODULATOR |
| ADT14GS-REEL | ANALOG TEMP SENSOR-VOLTAGE, 2.49-2.52V, 3Cel, RECTANGULAR, SURFACE MOUNT |
| ADT42GRT | ANALOG TEMP SENSOR-VOLTAGE, 0.75V, 3Cel, RECTANGULAR, SURFACE MOUNT |
| ADT50GRT | ANALOG TEMP SENSOR-VOLTAGE, 0.1-2V, 3Cel, RECTANGULAR, SURFACE MOUNT |
| ADT45GRT | ANALOG TEMP SENSOR-VOLTAGE, 0.1-2V, 3Cel, RECTANGULAR, SURFACE MOUNT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADRF6604-EVALZ | 功能描述:EVAL KIT FOR ADRF6604 RoHS:是 类别:RF/IF 和 RFID >> RF 评估和开发套件，板 系列:- 标准包装:1 系列:- 类型:GPS 接收器 频率:1575MHz 适用于相关产品:- 已供物品:模块 其它名称:SER3796 |
| ADRF6612ACPZ-R7 | 功能描述:IC MIXER 700-3000MHZ 48LFCSP 制造商:analog devices inc. 系列:- 包装:剪切带（CT） 零件状态:在售 RF 类型:- 频率:700MHz ~ 3GHz 增益:15dB 噪声系数:10.7dB 辅助属性:- 电流 - 电源:260mA 电压 - 电源:3.5 V ~ 5.25 V 封装/外壳:48-WFQFN 裸露焊盘 供应商器件封装:48-LFCSP（7x7） 标准包装:1 |
| ADRF6612-EVALZ | 功能描述:ADRF6612 EVAL BOARD 制造商:analog devices inc. 系列:- 零件状态:有效 类型:混频器 频率:700MHz ~ 3GHz 配套使用产品/相关产品:ADRF6612 所含物品:板 标准包装:1 |
| ADRF6614ACPZ-R7 | 功能描述:RF Mixer IC GSM 700MHz ~ 3GHz 48-LFCSP (7x7) 制造商:analog devices inc. 系列:- 包装:剪切带（CT） 零件状态:有效 RF 类型:GSM 频率:700MHz ~ 3GHz 混频器数:2 增益:9dB 噪声系数:10.7dB 辅助属性:- 电流 - 电源:260mA 电压 - 电源:5V 封装/外壳:48-WFQFN 裸露焊盘，CSP 供应商器件封装:48-LFCSP（7x7） 标准包装:1 |
| ADRF6614-EVALZ | 功能描述:EVAL BOARD FOR ADRF6614 制造商:analog devices inc. 系列:- 零件状态:有效 类型:混频器 频率:700MHz ~ 3GHz 配套使用产品/相关产品:ADRF6614 所含物品:板 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。