参数资料
型号: ADT7301ARM-REEL7
厂商: ANALOG DEVICES INC
元件分类: 温度/湿度传感器
英文描述: DIGITAL TEMP SENSOR-SERIAL, 13BIT(s), 4Cel, SQUARE, SURFACE MOUNT
封装: PLASTIC, MO-187AA, MSOP-8
文件页数: 4/14页
文件大小: 637K
代理商: ADT7301ARM-REEL7
ADT7301
Preliminary Technical Data
Rev. PrJ | Page 12 of 14
ADT7301 to ADSP-21xx Interface
Figure 17 shows an interface between the ADT7301 and the
ADSP-21xx DSP processor. To ensure correct operation of the
interface, the SPORT control register should be set up as
follows:
TFSW = RFSW = 1, alternate framing
INVRFS = INVTFS = 1, active low framing signal
DTYPE = 00, right justify data
SLEN = 1111, 16-bit data-words
ISCLK = 1, internal serial clock
TFSR = RFS = 1, frame every word
IRFS = 0, RFS configured as input
ITFS = 1, TFS configured as output
The interface requires an inverter between the SCLK line of the
ADSP-21xx and the SCLK input of the ADT7301. The ADSP-
21xx has the TFS and RFS of the SPORT tied together, with TFS
set as an output and RFS set as an input. The DSP operates in
alternate framing mode, and the SPORT control register is set
up as described previously.
ADT7301*
SCLK
DOUT
DIN
ADSP-21xx*
SCK
DR
DT
RFS
02884-
0-
011
*ADDITIONAL PINS OMITTED FOR CLARITY
TFS
CS
Figure 17. ADT7301 to ADSP-21 Interface
MOUNTING THE ADT7301
The ADT7301 can be used for surface- or air-temperature
sensing applications. If the device is cemented to a surface with
thermally conductive adhesive, the die temperature will be
within about 0.1°C of the surface temperature, thanks to the
ADT7301’s low power consumption. Care should be taken to
insulate the back and leads of the device from the air if the
ambient air temperature is different from the surface tempera-
ture being measured.
The ground pin provides the best thermal path to the die, so the
temperature of the die will be close to that of the printed circuit
ground track. Care should be taken to ensure that this is in
good thermal contact with the surface being measured.
As with any IC, the ADT7301 and its associated wiring and
circuits must be kept free from moisture to prevent leakage and
corrosion, particularly in cold conditions where condensation is
more likely to occur. Water-resistant varnishes and conformal
coatings can be used for protection. The small size of the
ADT7301 allows it to be mounted inside sealed metal probes,
which provide a safe environment for the device.
SUPPLY DECOUPLING
The ADT7301 should be decoupled with a 0.1 F ceramic
capacitor between VDD and GND. This is particularly important
if the ADT7301 is mounted remote from the power supply.
相关PDF资料
PDF描述
ADT7301ARM-REEL DIGITAL TEMP SENSOR-SERIAL, 13BIT(s), 4Cel, SQUARE, SURFACE MOUNT
ADT7301ARMZ-REEL DIGITAL TEMP SENSOR-SERIAL, 13BIT(s), 4Cel, SQUARE, SURFACE MOUNT
ADT7301BRTZ-500RL7 DIGITAL TEMP SENSOR-SERIAL, 13BIT(s), 0.50Cel, RECTANGULAR, SURFACE MOUNT
ADT7301BRT-REEL DIGITAL TEMP SENSOR-SERIAL, 13BIT(s), 0.50Cel, RECTANGULAR, SURFACE MOUNT
ADT7301BRT-500RL7 DIGITAL TEMP SENSOR-SERIAL, 13BIT(s), 0.50Cel, RECTANGULAR, SURFACE MOUNT
相关代理商/技术参数
参数描述
ADT7301ARMZ 功能描述:IC SENSOR TEMP 13BIT DGTL 8MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 热管理 系列:- 标准包装:3,000 系列:- 功能:温度开关 传感器类型:内部 感应温度:85°C 分界点 精确度:±6°C(最小值) 拓扑:ADC(三角积分型),比较器,寄存器库 输出类型:开路漏极 输出警报:是 输出风扇:是 电源电压:2.7 V ~ 5.5 V 工作温度:-55°C ~ 125°C 安装类型:表面贴装 封装/外壳:SC-74A,SOT-753 供应商设备封装:SOT-23-5 包装:带卷 (TR) 其它名称:ADT6501SRJZP085RL7-ND
ADT7301ARMZ-REEL7 功能描述:IC SENSOR TEMP 13BIT DGTL 8MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 热管理 系列:- 标准包装:2,500 系列:SilentSense™ 功能:温度监控系统(传感器) 传感器类型:内部和外部 感应温度:-55°C ~ 125°C,外部传感器 精确度:±2°C 本地(最大),±3°C 远程(最大) 拓扑:ADC(三角积分型),比较器,寄存器库 输出类型:I²C?/SMBus? 输出警报:是 输出风扇:是 电源电压:2.7 V ~ 5.5 V 工作温度:-55°C ~ 125°C 安装类型:表面贴装 封装/外壳:8-TSSOP,8-MSOP(0.118",3.00mm 宽) 供应商设备封装:8-MSOP 包装:带卷 (TR) 其它名称:MIC284-2BMMTRMIC284-2BMMTR-ND
ADT7301ART 制造商:Analog Devices 功能描述:TEMP SENSOR DGTL SERL(SPI) 6PIN SOT-23 - Bulk
ADT7301ART-500RL7 制造商:Analog Devices 功能描述:Temp Sensor Digital Serial (4-Wire, SPI) 6-Pin SOT-23 T/R 制造商:Analog Devices 功能描述:IC TEMP SENSOR
ADT7301ART-REEL7 制造商:Analog Devices 功能描述:Temp Sensor Digital Serial (4-Wire, SPI) 6-Pin SOT-23 T/R