- 您现在的位置：买卖IC网 > PDF目录22020 > ADT7481ARMZ (ON Semiconductor)IC SENSOR TEMP 2CH ALARM 10MSOP PDF资料下载
参数资料
| 型号： | ADT7481ARMZ |
| 厂商： | ON Semiconductor |
| 文件页数： | 14/20页 |
| 文件大小： | 237K |
| 描述： | IC SENSOR TEMP 2CH ALARM 10MSOP |
| 产品变化通告： | MFG CHG Notification ADI to ON Semi |
| 标准包装： | 50 |
| 功能： | 温度监控系统（传感器） |
| 传感器类型： | 内部和外部 |
| 感应温度： | -40°C ~ 120°C，外部传感器 |
| 精确度： | ±2.5°C（最小值） |
| 拓扑： | ADC，比较器，多路复用器，寄存器库 |
| 输出类型： | SMBus? |
| 输出警报： | 是 |
| 输出风扇： | 是 |
| 电源电压： | 3 V ~ 3.6 V |
| 工作温度： | -40°C ~ 120°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-TFSOP，10-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 10-MSOP |
| 包装： | 管件 |
| 其它名称： | ADT7481ARMZ-ND ADT7481ARMZOS |
ADT7481
http://onsemi.com
14
The number of data bytes that can be transmitted over the
serial bus in a single read or write operation is limited only
by what the master and slave devices can handle.
When all data bytes have been read or written, stop
conditions are established. In write mode, the master will
pull the data line high during the tenth clock pulse to assert
a stop condition. In read mode, the master device will
override the acknowledge bit by pulling the data line high
during the low period before the ninth clock pulse. This is
known as no acknowledge. The master will then take the
data line low during the low period before the tenth clock
pulse, then high during the tenth clock pulse to assert a stop
condition.
Any number of bytes of data may be transferred over the
serial bus in one operation, but it is not possible to mix read
and write in one operation because the type of operation is
determined at the beginning and cannot subsequently be
changed without starting a new operation. In the case of the
ADT7481, write operations contain either one or two bytes,
while read operations contain one byte.
To write data to one of the device data registers or to read
data from it, the address pointer register must be set so that
the correct data register is addressed. The first byte of a write
operation always contains a valid address that is stored in the
address pointer register. If data is to be written to the device,
the write operation contains a second data byte that is written
to the register selected by the address pointer register.
This procedure is illustrated in Figure 15. The device
address is sent over the bus followed by R/W
set to 0 and
followed by two data bytes. The first data byte is the address
of the internal data register to be written to, which is stored
in the address pointer register. The second data byte is the
data to be written to the internal data register.
Figure 15. Writing a Register Address to the Address Pointer Register, then Writing Data to the Selected Register
1
SCLK
SDATA
0
0
1
1
0
1
D7 D6 D5 D4 D3 D2 D1 D0
ACK. BY
ADT7481
START BY
MASTER
1
9
1
ACK. BY
ADT7481
9
D7 D6 D5 D4 D3 D2 D1 D0
ACK. BY
ADT7481
STOP BY
MASTER
1
9
SCLK (CONTINUED)
SDATA (CONTINUED)
FRAME 1
SERIAL BUS ADDRESS BYTE
FRAME 2
ADDRESS POINTER REGISTER BYTE
FRAME 3
DATA BYTE
R/W
Figure 16. Writing to the Address Pointer Register Only
1
SCLK
SDATA
0
0
1
1
0
1
D7
D6
D5 D4 D3 D2 D1 D0
ACK. BY
ADT7481
STOP BY
MASTER
START BY
MASTER
FRAME 1
SERIAL BUS ADDRESS BYTE
FRAME 2
ADDRESS POINTER REGISTER BYTE
1
1
9
ACK. BY
ADT7481
9
R/W
Figure 17. Reading Data from a Previously Selected Register
1
SCLK
SDATA
0
0
1
1
0
1
D7 D6 D5 D4 D3 D2 D1 D0
ACK. BY
ADT7481
STOP BY
MASTER
START BY
MASTER
FRAME 1
SERIAL BUS ADDRESS BYTE
FRAME 2
DATA BYTE FROM ADT7481
1
1
9
ACK. BY
ADT7481
9
R/W
相关PDF资料 |
PDF描述 |
|---|---|
| AIML-0603-R39K-T | INDUCTOR MULTILAYER 390NH 0603 |
| 4-1879023-7 | INDUCTOR 8.2UH 5% 1008 |
| TAJB474K035RNJ | CAP TANT 0.47UF 35V 10% 1210 |
| RBC12DCMH-S288 | CONN EDGECARD 24POS .100 EXTEND |
| D09S33E6RL09LF | CONN DSUB RCPT 9 POS R/A GOLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADT7481ARMZ-001 | 功能描述:板上安装温度传感器 2 CH TEMP SNSR/ALARM 2 WIRE SMBUS INTRFCE RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| ADT7481ARMZ-1 | 功能描述:IC SENSOR TEMP 2CH ALARM 10MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 热管理 系列:- 标准包装:1 系列:- 功能:温度监控系统（传感器） 传感器类型:内部和外部 感应温度:-40°C ~ 125°C，外部传感器 精确度:±2.5°C 本地（最大值），±5°C 远程（最大值） 拓扑:ADC，比较器，寄存器库 输出类型:2 线 SMBus? 输出警报:无 输出风扇:无 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:SOT-23-8 供应商设备封装:SOT-23-8 包装:Digi-Reel® 其它名称:296-22675-6 |
| ADT7481ARMZ-1R7 | 功能描述:板上安装温度传感器 2 CH TEMP SNSR/ALARM 2 WIRE SMBUS INTRFCE RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| ADT7481ARMZ-1REEL | 制造商:Rochester Electronics LLC 功能描述: 制造商:Analog Devices 功能描述: |
| ADT7481ARMZ-1REEL7 | 制造商:AD 制造商全称:Analog Devices 功能描述:Dual Channel Temperature Sensor and Over Temperature Alarm |
发布紧急采购，3分钟左右您将得到回复。