参数资料
| 型号： | ADV7120KPZ30 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 3/12页 |
| 文件大小： | 0K |
| 描述： | IC DAC VIDEO 3CH 30MHZ 44PLCC |
| 产品培训模块： | Data Converter Fundamentals DAC Architectures |
| 标准包装： | 1 |
| 设置时间： | 12ns |
| 位数： | 8 |
| 数据接口： | 并联 |
| 转换器数目： | 3 |
| 电压电源： | 单电源 |
| 功率耗散（最大）： | 625mW |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 44-LCC（J 形引线） |
| 供应商设备封装： | 44-PLCC（16.59x16.59） |
| 包装： | 管件 |
| 输出数目和类型： | 3 电流，单极 |
| 采样率（每秒）： | 30M |
ADV7120
REV. B
–11–
Power Planes
The PC board layout should have two distinct power planes,
one for analog circuitry and one for digital circuitry. The analog
power plane should encompass the ADV7120 (VAA) and all as-
sociated analog circuitry. This power plane should be connected
to the regular PCB power plane (VCC) at a single point through
a ferrite bead, as illustrated in Figure 8. This bead should be lo-
cated within three inches of the ADV7120.
The PCB power plane should provide power to all digital logic
on the PC board, and the analog power plane should provide
power to all ADV7120 power pins, voltage reference circuitry
and any output amplifiers.
The PCB power and ground planes should not overlay portions
of the analog power plane. Keeping the PCB power and ground
planes from overlaying the analog power plane will contribute to
a reduction in plane-to-plane noise coupling.
Supply Decoupling
Noise on the analog power plane can be further reduced by the
use of multiple decoupling capacitors. (See Figure 8.)
Optimum performance is achieved by the use of 0.1
F ceramic
capacitors. Each of the two groups of VAA should be individually
decoupled to ground. This should be done by placing the ca-
pacitors as close as possible to the device with the capacitor
leads as short as possible, thus minimizing lead inductance.
It is important to note that while the ADV7120 contains cir-
cuitry to reject power supply noise, this rejection decreases with
frequency. If a high frequency switching power supply is used,
the designer should pay close attention to reducing power sup-
ply noise. A dc power supply filter (Murata BNX002) will pro-
vide EMI suppression between the switching power supply and
the main PCB. Alternatively, consideration could be given to
using a three terminal voltage regulator.
Digital Signal Interconnect
The digital signal lines to the ADV7120 should be isolated as
much as possible from the analog outputs and other analog cir-
cuitry. Digital signal lines should not overlay the analog power
plane.
Due to the high clock rates used, long clock lines to the
ADV7120 should be avoided so as to minimize noise pickup.
Any active pull-up termination resistors for the digital inputs
should be connected to the regular PCB power plane (VCC), and
not the analog power plane.
Analog Signal Interconnect
The ADV7120 should be located as close as possible to the out-
put connectors thus minimizing noise pickup and reflections
due to impedance mismatch.
The video output signals should overlay the ground plane, and
not the analog power plane, thereby maximizing the high fre-
quency power supply rejection.
For optimum performance, the analog outputs should each have
a source termination resistance to ground of 75
(doubly ter-
minated 75
configuration). This termination resistance should
be as close as possible to the ADV7120 so as to minimize
reflections.
Additional information on PCB design is available in an applica-
tion note entitled “Design and Layout of a Video Graphics Sys-
tem for Reduced EMI.” This application note is available from
Analog Devices, publication number E1309-15-10/89.
相关PDF资料 |
PDF描述 |
|---|---|
| ADV7125WBCPZ170 | IC DAC VIDEO 3-CH 330MHZ 48VFQFN |
| ADV7171KSZ-REEL | IC DAC VIDEO ENC NTSC 44-MQFP |
| ADV7172KSTZ-REEL | IC DAC VIDEO NTSC 6-CH 48-LQFP |
| ADV7177KSZ-REEL | IC DAC VIDEO NTSC 3-CH 44MQFP |
| ADV7179KCPZ-REEL | IC ENCODER VID NTSC/PAL 40LFCSP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADV7120KPZ50 | 功能描述:IC DAC VIDEO 3CH 50MHZ 44PLCC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 标准包装:2,400 系列:- 设置时间:- 位数:18 数据接口:串行 转换器数目:3 电压电源:模拟和数字 功率耗散（最大）:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:36-TFBGA 供应商设备封装:36-TFBGA 包装:带卷 (TR) 输出数目和类型:* 采样率（每秒）:* |
| ADV7120KPZ80 | 功能描述:IC DAC VIDEO 3CH 80MHZ 44PLCC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 标准包装:2,400 系列:- 设置时间:- 位数:18 数据接口:串行 转换器数目:3 电压电源:模拟和数字 功率耗散（最大）:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:36-TFBGA 供应商设备封装:36-TFBGA 包装:带卷 (TR) 输出数目和类型:* 采样率（每秒）:* |
| ADV7120KST30 | 制造商:Analog Devices 功能描述:DAC 3-CH Segment 8-bit 48-Pin LQFP 制造商:Rochester Electronics LLC 功能描述:TRIPLE 8 BIT VIDEO DAC I.C. - Bulk 制造商:Analog Devices 功能描述:IC ((NS)) |
| ADV7120KST30-REEL | 制造商:Analog Devices 功能描述:DAC 3-CH Segment 8-bit 48-Pin LQFP T/R 制造商:Rochester Electronics LLC 功能描述:TRIPLE 8 BIT VIDEO DAC I.C. - Tape and Reel |
| ADV7120KST50 | 制造商:Analog Devices 功能描述:DAC 3-CH Segment 8-bit 48-Pin TQFP 制造商:Rochester Electronics LLC 功能描述:TRIPLE 8 BIT VIDEO DAC I.C. - Bulk 制造商:Analog Devices 功能描述:IC 8-BIT VIDEO DAC |
发布紧急采购，3分钟左右您将得到回复。