参数资料
| 型号： | AEP18024 |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 8/9页 |
| 文件大小： | 0K |
| 描述： | RELAY AUTOMOTIVE SPST 80A 24V |
| 标准包装： | 1 |
| 系列： | AEP |
| 继电器类型： | 自动 |
| 线圈类型： | 无锁存 |
| 线圈电流： | 188mA |
| 线圈电压： | 24VDC |
| 触点形式： | SPST-NO（1 A 型） |
| 触点额定值（电流）： | 80A |
| 切换电压： | 400VDC - 标称 |
| 关闭电压（最大）： | 18 VDC |
| 关闭电压（最小）： | 1.92 VDC |
| 特点： | 密封 - 全密封型 |
| 安装类型： | 底座安装 |
| 端接类型： | 接线柱 |
| 包装： | 散装 |
| 操作时间： | 50ms |
| 释放时间： | 30ms |
| 线圈功率： | 4.5 W |
| 工作温度： | -40°C ~ 80°C |
| 其它名称： | 255-3105 |
EP (AEP)
6. 300A Connector type
CAD Data
1: Load input terminal ( + )
External dimensions
111
4.370
92
3.622
86
3.386
79 ± 0.3
3.110 ± .012
44
1.732
27
1.063
Schematic (Top view)
6: Coil (GND)
5: Coil (V + )
1 + 2 ?
Input and load sides have polarities ( + ) and ( ? ).
60
2.362
63 47 ± 0.3 1.063
2.480 1.850 ± .012
27
1+
2-
2: Load input terminal ( ? )
Panel cut-off
79 ± 0.1
3.110 ± .004
3-. 6 dia
6 d .
Connector
6: Coil terminal (GND)
3-
23
ia.
3-6 ± 0.1 dia.
3-.236 ± .004 dia.
47 ± 0.1
1.850 ± .004
24.5
.965
Part No.: 7282-1020 (Yazaki)*
(13)
5: Coil terminal (V + )
M8 bolt
M8 Flange nut
*Accessories (included)
(.512)
300 ± 10
11.811 ± .394
48.7
1.917
39.3
1.547
3
.118
73.4
2.890
61.7 74.7
2.429 2.941
5.7
.224
0.5sq/White(V+)
(5)
(.197)
0.5sq/Green(GND)
Female connector (non-waterproof type),
Yazaki 7283-1020
SAFETY STANDARDS
Dimension:
Less than 10mm .394inch :
10 to 50mm .394 to 1.969inch :
50 to 100mm 1.969 to 3.937 inch :
Min. 100mm 3.937 inch :
General tolerance
± 0.3 ± .012
± 0.6 ± .024
± 1.0 ± .039
± 1.6 ± .063
Product name
10A
20A
80A
NOTES
File No.
E43149
E43149
E43149
UL/C-UL (Recognized)
Contact rating
10A 400V DC, 10A 277V AC Resistive
20A 400V DC, 20A 277V AC Resistive
80A 400V DC, 80A 277V AC Resistive
1. Please read “GENERAL
APPLICATION GUIDELINES” for
regular cautionary items.
2. When installing the relay, always
use washers to prevent the screws
from loosening.
Tighten each screw within the rated
range given below. Exceeding the
maximum torque may result in breakage.
Mounting is possible in either direction.
? M5 screw (20A, 80A, 200A and 300A
main unit mounting section): 3 to 4N·m
? M4 screw (10A PC board type main unit
mounting section): 0.98 to 1.2N·m
(10A TM type main unit mounting
section): 1.8 to 2.7N·m
Recommended securing torque on load
side terminals
? 80A/M5 bolt: 3.5 to 6.5 N·m
? 200A/M6 bolt: 6 to 8 N·m
? 300A/M8 bolt: 10 to 12 N·m
3. The contacts of the relay are
polarized. Please follow instructions
in the connection schematic when
connecting the contacts.
We recommend installing a surge
protector varistor for the 10A, 20A, 80A
and 200A types. Please note that when
using a diode, the switching speed may
decrease and cause a reduction in cut-off
performance. For the 300A type,
separate surge countermeasures are not
required, because it contains a built-in
surge absorbing element.
<Recommend varistor>
Amount of proof energy: Min. 1 J
Varistor voltage: 1.5 to 3.0 times of
nominal voltage
4. Do not use a relay if it has been
dropped.
5. Avoid mounting the relay in strong
magnetic ?elds (near a transformer or
magnet) or close to an object that
radiates heat.
6. Electrical life
This relay is a DC high-voltage switch. In
its ?nal breakdown mode, it may lose the
ability to provide the proper cut-off.
Therefore, do not exceed the indicated
switching capacity and life. (Please treat
the relay as a product with limited life and
replace it when necessary.)
In the event that the relay loses cut-off
ability, there is a possibility that burning
may spread to surrounding parts, so
con?gure the layout so that the power is
turned off within one second and from the
point of view of safety, consider installing
a failsafe circuit in the device.
Also, in order to avoid increased contact
resistance, do not operate when there is
no switching load.
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e/
ASCTB3E 201211-T
相关PDF资料 |
PDF描述 |
|---|---|
| AEP51024 | RELAY AUTOMOTIVE SPST 10A 24V |
| AEV18024W | RELAY AUTOMOTIVE SPST 80A 24V |
| OSTYL104150 | TERM BLOCK RISING CLAMP 10POS |
| AEV18012W | RELAY AUTOMOTIVE SPST 80A 12V |
| OSTYL102150 | TERM BLOCK RISING CLAMP 10POS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AEP19012 | 功能描述:通用继电器 1 Form A 300A 12VDC Sealed, 4W RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
| AEP19024 | 功能描述:通用继电器 1 Form A 300A 24VDC Sealed, 4W RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
| AEP-199SI | 制造商:ALLIED 制造商全称:Allied Components International 功能描述:EP10 POWER TRANSFORMER |
| AE-P20U | 功能描述:ADAPTER SOCKET 28-PLCC TO 20-DIP RoHS:是 类别:编程器，开发系统 >> 适配器 系列:- 标准包装:1 系列:- 模块/板类型:编程适配器 适用于相关产品:PG3000，PG3100，PG2000 产品目录页面:1699 (CN2011-ZH PDF) 配用:PG-3000-ND - PROGRAMMER USB FIELD OSCPG2000P-ND - OSC PROGRAMMER HAND HELD 相关产品:CPPLT5-LT7PT-ND - OSC 3.3V PROG TTL TRI ST 50PPMCPPLT5-LT7PP-ND - OSC 3.3V PROG TTL PWRDN 50PPMCPPLT5-LT76T-ND - OSC 3.3V PROG TTL TRI ST 100PPMCPPLT5-LT76P-ND - OSC 3.3V PROG TTL PWRDN 100PPMCPPLT5-LT5PT-ND - OSC 3.3V PROG TTL TRI ST 50PPMCPPLT5-LT5PP-ND - OSC 3.3V PROG TTL PWRDN 50PPMCPPLT5-LT56T-ND - OSC 3.3V PROG TTL TRI ST 100PPMCPPLT5-LT56P-ND - OSC 3.3V PROG TTL PWRDN 100PPMCPPLT5-LT0PT-ND - OSC 3.3V PROG TTL TRI ST 50PPMCPPLT5-LT0PP-ND - OSC 3.3V PROG TTL PWRDN 50PPM更多... 其它名称:SC5320 |
| AE-P20U-Z | 功能描述:ADAPTER UNIV DIP20/PLCC20 RoHS:是 类别:编程器，开发系统 >> 适配器 系列:- 标准包装:96 系列:- 模块/板类型:TQFP 插座模块 适用于相关产品:- |
发布紧急采购，3分钟左右您将得到回复。