参数资料
型号: AEP19012
厂商: Panasonic Electric Works
文件页数: 3/9页
文件大小: 0K
描述: RELAY AUTOMOTIVE SPST 300A 12V
标准包装: 1
系列: AEP
继电器类型: 自动
线圈类型: 无锁存
线圈电流: 3.3A
线圈电压: 12VDC
触点形式: SPST-NO(1 A 型)
触点额定值(电流): 300A
切换电压: 400VDC - 标称
关闭电压(最大): 9 VDC
关闭电压(最小): 0.96 VDC
特点: 密封 - 全密封型
安装类型: 底座安装
端接类型: 接线柱
包装: 散装
操作时间: 30ms
释放时间: 10ms
线圈功率: 4 W
工作温度: -40°C ~ 80°C
其它名称: 255-3106
EP (AEP)
2. Speci?cations
Characteristics
Item
10A type
20A type
Speci?cations
80A type
200A type
300A type
Contact arrangement
1 Form A
Nominal switching capacity
(Resistive load)
10A 400V DC
20A 400V DC
80A 400V DC
200A 400V DC
300A 400V DC
Max. contact allowance voltage
1,000V DC
Short term current
15A (3min)
(harness wire: 2mm 2 )
30A (30s)
(harness wire: 2mm 2 )
40A (10min)
(harness wire: 3mm 2 )
60A (1min)
(harness wire: 3mm 2 )
120A (15min)
(harness wire:
15mm 2 )
300A (15min)
(harness wire:
60mm 2 )
400A (10min)
(harness wire:
100mm 2 )
Rating
Max. cut-off current
Overload cut-off rating
Reverse cut-off rating
Min. switching capacity
Contact voltage drop (Initial)
30A 400V DC
(Min. 50 cycles)* 2
–20A 200V DC
(Min. 10 cycles)* 2
1A 6V DC
Max. 0.5V
(When carrying
current is 10A)
60A 400V DC
(Min. 50 cycles)* 2
–20A 200V DC
(Min. 100 cycles)* 2
1A 12V DC
Max. 0.2V
(By voltage drop
6V DC 20A)
800A 300V DC
(1 cycle)* 2
120A 400V DC
(Min. 50 cycles)* 2
–80A 200V DC
(Min. 1,000 cycles)* 2
Max. 0.067V
(By voltage drop
6V DC 20A)
2,000A 350V DC
(1 cycle)* 2
–200A 200V DC
(Min. 1,000 cycles)* 2
1A 12V DC
Max. 0.1V
(When carrying
current is 200A)
2,500A 300V DC
(3 cycles)* 3
600A 400V DC
(Min. 300 cycles)
–300A 200V DC
(Min. 100 cycles)
1A 24V DC
Max. 0.06V
(When carrying
current is 300A)
Insulation resistance (Initial)
Min. 100M ? (at 1,000V DC) Measurement at same location as “Breakdown voltage” section.
Breakdown
voltage
(Initial)
Between open
contacts
Between contact
and coil
2,500 Vrms for 1min. (Detection current: 10mA)
2,500 Vrms for 1min. (Detection current: 10mA)
Electrical
characteristics
Operate time (at 20 ° C 68 ° F )
Max. 50ms
(Nominal voltage applied to the coil, excluding contact bounce time)
Max. 30ms
(Nominal voltage
applied to the coil,
excluding contact
bounce time)
Max. 10ms
Release time (at 20 ° C 68 ° F )
Max. 30ms
(After the nominal operation voltage stops, without diode)
(After the nominal
operation voltage
stops)
Mechanical
Shock
resistance
Functional
10A, 20A (ON), 80A (ON), 200A (ON) and 300A (ON) types:
Min. 196 m/s 2 (Half-wave pulse of sine wave: 11 ms; detection time: 10 μ s)
20A (OFF), 80A (OFF), 200A (OFF) and 300A (OFF) types:
Min. 98 m/s 2 (Half-wave pulse of sine wave: 11 ms; detection time: 10 μ s)
characteristics
Vibration
resistance
Mechanical
Destructive
Functional
Destructive
Min. 10 5
Min. 490 m/s 2 (Half-wave pulse of sine wave: 6 ms)
10 to 200Hz, acceleration 43m/s 2 constant (Detection time: 10 μ s)
10 to 200Hz, acceleration 43m/s 2 constant (3 directions, each 4 hours)
Min. 2 × 10 5
Expected life
Electrical* 4
(Resistive load)
10A 400V DC
Min. 7.5 × 10 4 * 2
(Switching frequency:
20 times/min)
20A 400V DC
Min. 3 × 10 3 * 2
10A 1,000V DC
Min. 10 3 * 2
(Switching frequency:
80A 400V DC
Min. 10 3 * 2
(Switching frequency:
20 times/min)
200A 400V DC
Min. 3 × 10 3 * 2
(Switching frequency:
20 times/min)
60A 1,000V DC
Min. 10 3 * 2
300A 400V DC
Min. 10 3
(Switching frequency:
6 times/min)
6 times/min)
(Switching frequency:
6 times/min)
Conditions
Conditions for operation,
transport and storage* 1
Ambient temperature: –40 ° C to +80 ° C –40 ° F to +176 ° F (Storage: Max. +85 ° C +185 ° F ),
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Unit weight
Approx. 80 g
2.820oz
Approx. 180 g
6.349oz
Approx. 400 g
14.11oz
Approx. 600 g
21.16oz
Approx. 750 g
26.46oz
Notes: *1. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value.
Refer to Usage, transport and storage conditions in NOTES.
*2. Conditions: Varistor used for coil surge absorption. Note: if a diode is used the life will be lower.
*3. Condition: Switches rated number of 10 cycles each time there is a 2,500A cut-off.
*4. Please refer to the reference data on the following page for switching and cut-off at 400 V DC and higher.
ASCTB3E 201211-T
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e/
相关PDF资料
PDF描述
4310R-104-331/681L RES NET MULT OHM 16 RES 10-SIP
OSTKQ036200 TERM BLOCK RISING CLAMP 3POS
G9EA-1-B-CA DC12 RELAY GEN PURPOSE SPST 100A 12V
OSTKP060152 TERM BLOCK RISING CLAMP 6POS
OSTYE100150 TERM BLOCK RISING CLAMP 10POS
相关代理商/技术参数
参数描述
AEP19024 功能描述:通用继电器 1 Form A 300A 24VDC Sealed, 4W RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料:
AEP-199SI 制造商:ALLIED 制造商全称:Allied Components International 功能描述:EP10 POWER TRANSFORMER
AE-P20U 功能描述:ADAPTER SOCKET 28-PLCC TO 20-DIP RoHS:是 类别:编程器,开发系统 >> 适配器 系列:- 标准包装:1 系列:- 模块/板类型:编程适配器 适用于相关产品:PG3000,PG3100,PG2000 产品目录页面:1699 (CN2011-ZH PDF) 配用:PG-3000-ND - PROGRAMMER USB FIELD OSCPG2000P-ND - OSC PROGRAMMER HAND HELD 相关产品:CPPLT5-LT7PT-ND - OSC 3.3V PROG TTL TRI ST 50PPMCPPLT5-LT7PP-ND - OSC 3.3V PROG TTL PWRDN 50PPMCPPLT5-LT76T-ND - OSC 3.3V PROG TTL TRI ST 100PPMCPPLT5-LT76P-ND - OSC 3.3V PROG TTL PWRDN 100PPMCPPLT5-LT5PT-ND - OSC 3.3V PROG TTL TRI ST 50PPMCPPLT5-LT5PP-ND - OSC 3.3V PROG TTL PWRDN 50PPMCPPLT5-LT56T-ND - OSC 3.3V PROG TTL TRI ST 100PPMCPPLT5-LT56P-ND - OSC 3.3V PROG TTL PWRDN 100PPMCPPLT5-LT0PT-ND - OSC 3.3V PROG TTL TRI ST 50PPMCPPLT5-LT0PP-ND - OSC 3.3V PROG TTL PWRDN 50PPM更多... 其它名称:SC5320
AE-P20U-Z 功能描述:ADAPTER UNIV DIP20/PLCC20 RoHS:是 类别:编程器,开发系统 >> 适配器 系列:- 标准包装:96 系列:- 模块/板类型:TQFP 插座模块 适用于相关产品:-
AEP210-S 制造商:TALEMA 制造商全称:TALEMA 功能描述:ADSL Transformers for Alcatel Chipsets