参数资料
| 型号： | AEP51024 |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 3/9页 |
| 文件大小： | 0K |
| 描述： | RELAY AUTOMOTIVE SPST 10A 24V |
| 标准包装： | 1 |
| 系列： | AEP |
| 继电器类型： | 自动 |
| 线圈类型： | 无锁存 |
| 线圈电流： | 52mA |
| 线圈电压： | 24VDC |
| 触点形式： | SPST-NO（1 A 型） |
| 触点额定值（电流）： | 10A |
| 切换电压： | 400VDC - 标称 |
| 关闭电压（最大）： | 18 VDC |
| 关闭电压（最小）： | 1.92 VDC |
| 特点： | 密封 - 全密封型 |
| 安装类型： | 底座安装 |
| 端接类型： | 快速连接 - 0.187"（4.7mm） |
| 包装： | 散装 |
| 操作时间： | 50ms |
| 释放时间： | 30ms |
| 线圈功率： | 1.4 W |
| 工作温度： | -40°C ~ 80°C |
| 其它名称： | 255-3111 |
EP (AEP)
2. Speci?cations
Characteristics
Item
10A type
20A type
Speci?cations
80A type
200A type
300A type
Contact arrangement
1 Form A
Nominal switching capacity
(Resistive load)
10A 400V DC
20A 400V DC
80A 400V DC
200A 400V DC
300A 400V DC
Max. contact allowance voltage
1,000V DC
Short term current
15A (3min)
(harness wire: 2mm 2 )
30A (30s)
(harness wire: 2mm 2 )
40A (10min)
(harness wire: 3mm 2 )
60A (1min)
(harness wire: 3mm 2 )
120A (15min)
(harness wire:
15mm 2 )
300A (15min)
(harness wire:
60mm 2 )
400A (10min)
(harness wire:
100mm 2 )
Rating
Max. cut-off current
Overload cut-off rating
Reverse cut-off rating
Min. switching capacity
Contact voltage drop (Initial)
—
30A 400V DC
(Min. 50 cycles)* 2
–20A 200V DC
(Min. 10 cycles)* 2
1A 6V DC
Max. 0.5V
(When carrying
current is 10A)
—
60A 400V DC
(Min. 50 cycles)* 2
–20A 200V DC
(Min. 100 cycles)* 2
1A 12V DC
Max. 0.2V
(By voltage drop
6V DC 20A)
800A 300V DC
(1 cycle)* 2
120A 400V DC
(Min. 50 cycles)* 2
–80A 200V DC
(Min. 1,000 cycles)* 2
—
Max. 0.067V
(By voltage drop
6V DC 20A)
2,000A 350V DC
(1 cycle)* 2
—
–200A 200V DC
(Min. 1,000 cycles)* 2
1A 12V DC
Max. 0.1V
(When carrying
current is 200A)
2,500A 300V DC
(3 cycles)* 3
600A 400V DC
(Min. 300 cycles)
–300A 200V DC
(Min. 100 cycles)
1A 24V DC
Max. 0.06V
(When carrying
current is 300A)
Insulation resistance (Initial)
Min. 100M ? (at 1,000V DC) Measurement at same location as “Breakdown voltage” section.
Breakdown
voltage
(Initial)
Between open
contacts
Between contact
and coil
2,500 Vrms for 1min. (Detection current: 10mA)
2,500 Vrms for 1min. (Detection current: 10mA)
Electrical
characteristics
Operate time (at 20 ° C 68 ° F )
Max. 50ms
(Nominal voltage applied to the coil, excluding contact bounce time)
Max. 30ms
(Nominal voltage
applied to the coil,
excluding contact
bounce time)
Max. 10ms
Release time (at 20 ° C 68 ° F )
Max. 30ms
(After the nominal operation voltage stops, without diode)
(After the nominal
operation voltage
stops)
Mechanical
Shock
resistance
Functional
10A, 20A (ON), 80A (ON), 200A (ON) and 300A (ON) types:
Min. 196 m/s 2 (Half-wave pulse of sine wave: 11 ms; detection time: 10 μ s)
20A (OFF), 80A (OFF), 200A (OFF) and 300A (OFF) types:
Min. 98 m/s 2 (Half-wave pulse of sine wave: 11 ms; detection time: 10 μ s)
characteristics
Vibration
resistance
Mechanical
Destructive
Functional
Destructive
Min. 10 5
Min. 490 m/s 2 (Half-wave pulse of sine wave: 6 ms)
10 to 200Hz, acceleration 43m/s 2 constant (Detection time: 10 μ s)
10 to 200Hz, acceleration 43m/s 2 constant (3 directions, each 4 hours)
Min. 2 × 10 5
Expected life
Electrical* 4
(Resistive load)
10A 400V DC
Min. 7.5 × 10 4 * 2
(Switching frequency:
20 times/min)
20A 400V DC
Min. 3 × 10 3 * 2
10A 1,000V DC
Min. 10 3 * 2
(Switching frequency:
80A 400V DC
Min. 10 3 * 2
(Switching frequency:
20 times/min)
200A 400V DC
Min. 3 × 10 3 * 2
(Switching frequency:
20 times/min)
60A 1,000V DC
Min. 10 3 * 2
300A 400V DC
Min. 10 3
(Switching frequency:
6 times/min)
6 times/min)
(Switching frequency:
6 times/min)
Conditions
Conditions for operation,
transport and storage* 1
Ambient temperature: –40 ° C to +80 ° C –40 ° F to +176 ° F (Storage: Max. +85 ° C +185 ° F ),
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Unit weight
Approx. 80 g
2.820oz
Approx. 180 g
6.349oz
Approx. 400 g
14.11oz
Approx. 600 g
21.16oz
Approx. 750 g
26.46oz
Notes: *1. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value.
Refer to Usage, transport and storage conditions in NOTES.
*2. Conditions: Varistor used for coil surge absorption. Note: if a diode is used the life will be lower.
*3. Condition: Switches rated number of 10 cycles each time there is a 2,500A cut-off.
*4. Please refer to the reference data on the following page for switching and cut-off at 400 V DC and higher.
ASCTB3E 201211-T
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e/
相关PDF资料 |
PDF描述 |
|---|---|
| AEV18024W | RELAY AUTOMOTIVE SPST 80A 24V |
| OSTYL104150 | TERM BLOCK RISING CLAMP 10POS |
| AEV18012W | RELAY AUTOMOTIVE SPST 80A 12V |
| OSTYL102150 | TERM BLOCK RISING CLAMP 10POS |
| OSTHM086081 | CONN TERM BLOCK 8POS 10.16MM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AEP51024J | 制造商:Panasonic 功能描述:Bulk |
| AEP51048 | 功能描述:RELAY AUTOMOTIVE SPST 10A 48V RoHS:是 类别:继电器 >> 功率，高于 2 安 系列:AEP 其它有关文件:Standards Chart 标准包装:50 系列:DK 继电器类型:通用 线圈类型:无锁存 线圈电流:16.7mA 线圈电压:12VDC 触点形式:SPST-NO（1 A 型） 触点额定值（电流）:10A 切换电压:250VAC，125VDC - 最小值 关闭电压（最大）:8.4 VDC 关闭电压（最小）:1.2 VDC 特点:密封式 - 全部 安装类型:通孔 端接类型:PC 引脚 包装:管件 触点材料:银锡氧化物（AgSnO） 操作时间:10ms 释放时间:8ms 线圈功率:200 mW 线圈电阻:720 欧姆 工作温度:-40°C ~ 65°C 其它名称:255-1096DK1AE-12V |
| AEP51048J | 制造商:Panasonic Electric Works 功能描述: |
| AEP510-S | 制造商:TALEMA 制造商全称:TALEMA 功能描述:ADSL Transformers for Globespan Chipsets |
| AEP510-T | 制造商:TALEMA 制造商全称:TALEMA 功能描述:ADSL Transformers for Globespan Chipsets |
发布紧急采购，3分钟左右您将得到回复。