- 您现在的位置：买卖IC网 > PDF目录255375 > AFBR-1010S FIBER OPTIC TRANSMITTER, 635-675nm, 50Mbps, THROUGH HOLE MOUNT PDF资料下载
参数资料
| 型号： | AFBR-1010S |
| 元件分类： | 光发射 |
| 英文描述： | FIBER OPTIC TRANSMITTER, 635-675nm, 50Mbps, THROUGH HOLE MOUNT |
| 文件页数： | 2/9页 |
| 文件大小： | 104K |
| 代理商： | AFBR-1010S |
2
Pin Description Transmitter
Front View Optics Up. 1 = Leftmost Pin to 4 = Rightmost Pin
Pin
Name
Function/Description
Notes
1
Data In
Transmitter Data Input
1
2VEET
Transmitter Ground
3VCCT
Transmitter Power 5 V
± 5%
4
CONT
Connection to LED Current Control Resistor
2
Notes:
1. Logic 1 input will turn the light on and the logic 0 will turn the light off.
2. This is a digital input for the transmitter output power selector. RCN < 17.32 k will set the
transmitter to normal output power. RCR > 25.65 k will set the transmitter to reduced output
power. RCN/RCR is connected between CONT input and VCCT.
Pin Description Receiver
Front View Optics Up. 1 = Leftmost Pin to 4 = Rightmost Pin
Pin
Name
Function/Description
Notes
1VCCR
Receiver Power 5 V
± 5%
2VEER
Receiver Ground
3
Mode Out
Receiver Mode Output
1
4
Data Out
Receiver Data Output
2
Notes:
1. This output is logic 1 high if the receiver is asleep for no light input, and logic 0 low if the
receiver is awake for valid light input levels.
2. TTL compatible data output.
Absolute Maximum Ratings
Parameter
Symbol
Min.
Typical
Max.
Unit
Notes
Storage Temperature
Ts
–40
100
°C1
Ambient Temperature, No Air Flow
Tc
–40
95
°C
1, 2
Relative Humidity
RH
0
95
%
1
Supply Voltage
VCCT/VCCR
–0.5
7
V
1
Data Input Voltage
VIN
–0.5
VCC + 0.5
V
1
CONT Input Voltage
VCONT
–0.5
VCC + 0.5
V
1, 3
Data Output Current
IO
10
mA
1, 4
Mode Output Current
IM
10
mA
1
Data Rate
8
45.2
50
MBaud
Notes:
1. Absolute Maximum Ratings are those values beyond which damage to the device may occur if these limits are exceeded for other than a short
period of time. See Reliability Data Sheets for specific reliability performance.
2. Measured 1 cm outside of MOST optical connector housing (header) on a MOST application PCB. The optical components (EOC and OEC) are
inside the header connector assembly composed of the plastic housing and EMI shield, that is, airflow is restricted to natural convection.
3. The CONT input is a digital function. An open circuit will select lower (normal light output -3 dB), and a short circuit to VCCT will select normal light
output power. This makes the LED meet eye safety under this fault condition.
4. A safety resistor of 50 W (minimum) is to be connected between Data Out and the receiving circuitry. The receiving circuitry must be powered up
within 50 ms after Mode Out goes low to prevent permanent damage to the OEC.
相关PDF资料 |
PDF描述 |
|---|---|
| AFBR-1010T | FIBER OPTIC TRANSMITTER, 635-675nm, 50Mbps, THROUGH HOLE MOUNT-RIGHT ANGLE |
| AFF-1H30AB100 | FIBER OPTIC FIXED ATTENUATOR, 1528-1605nm, PANEL MOUNT |
| AFF-1H30AB103 | FIBER OPTIC FIXED ATTENUATOR, 1528-1605nm, PANEL MOUNT, FC/APC CONNECTOR |
| AFF-1H30AB109 | FIBER OPTIC FIXED ATTENUATOR, 1528-1605nm, PANEL MOUNT, FC/UPC CONNECTOR |
| AFF-1H30AB10A | FIBER OPTIC FIXED ATTENUATOR, 1528-1605nm, PANEL MOUNT, SC/UPC CONNECTOR |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AFBR-1010T | 制造商:Avago Technologies 功能描述:TX OPTICAL FIBER 50MBD 4PIN - Trays |
| AFBR-1012 | 制造商:AVAGO 制造商全称:AVAGO TECHNOLOGIES LIMITED 功能描述:Fiber Optic Transmitter and Receiver for 50 MBaud MOST |
| AFBR-1012L | 制造商:AVAGO 制造商全称:AVAGO TECHNOLOGIES LIMITED 功能描述:Fiber Optic Transmitter and Receiver for 50 MBaud MOST |
| AFBR-1012M | 制造商:AVAGO 制造商全称:AVAGO TECHNOLOGIES LIMITED 功能描述:Fiber Optic Transmitter and Receiver for 50 MBaud MOST |
| AFBR-1012S | 制造商:AVAGO 制造商全称:AVAGO TECHNOLOGIES LIMITED 功能描述:Fiber Optic Transmitter and Receiver for 50 MBaud MOST |
发布紧急采购，3分钟左右您将得到回复。