- 您现在的位置：买卖IC网 > PDF目录294985 > AGN210A03X POWER/SIGNAL RELAY, DPDT, LATCHED, 0.033A (COIL), 3VDC (COIL), 100mW (COIL), 1A (CONTACT), 110VDC (CONTACT), SURFACE MOUNT-STRAIGHT PDF资料下载
参数资料
| 型号： | AGN210A03X |
| 元件分类： | 功率/信号继电器 |
| 英文描述： | POWER/SIGNAL RELAY, DPDT, LATCHED, 0.033A (COIL), 3VDC (COIL), 100mW (COIL), 1A (CONTACT), 110VDC (CONTACT), SURFACE MOUNT-STRAIGHT |
| 封装： | ROHS COMPLIANT |
| 文件页数： | 6/6页 |
| 文件大小： | 118K |
| 代理商： | AGN210A03X |
GN (AGN)
NOTES
1. Coil operating power
1) As a general rule, only a pure DC
power supply should be used for the coil
drive.
2) To ensure proper operation, the
voltage applied to both terminals of the
coil should be
±5% (at 20°C 68°F) the
rated operating voltage of the coil. Also,
be aware that the pick-up and drop-out
voltages will uctuate depending on the
ambient temperature and operating
conditions.
3) The ripple factor for the voltage applied
to the coil should be less than 5%.
4) For set and reset latching relays, the
rated operating voltage should be applied
to the coil for 10 ms or more.
2. Coil connection
When connecting coils, refer to the wiring
diagram to prevent mis-operation or
malfunction.
3. External magnetic eld
Since GN relays are highly sensitive
polarized relays, their characteristics will
be affected by a strong external magnetic
eld. Avoid using the relay under that
condition.
4. Cleaning
In automatic cleaning, cleaning with the
boiling method is recommended. Avoid
ultrasonic cleaning which subject the
relay to high frequency vibrations. It may
cause the contacts to stick.
It is recommended that a uorinated
hydrocarbon or other alcoholic solvent be
used.
5. Packing style
1) The relay is packed in a tube with the
relay orientation mark on the left side, as
shown in the gure below.
2) Tape and reel packing
(A type)
(1)-1 Tape dimensions
mm inch
(S type)
(1)-2 Tape dimensions
(2) Dimensions of plastic peel
mm inch
6. Automatic insertion
To maintain the internal function of the
relay, the chucking pressure should not
exceed the values below.
Chucking pressure in the direction A:
4.9 N {500gf} or less
Chucking pressure in the direction B:
9.8 N {1 kgf} or less
Chucking pressure in the direction C:
9.8 N {1 kgf} or less
Please chuck the
portion.
Avoid chucking the center of the relay.
In addition, excessive chucking pressure
to the pinpoint of the relay should be
avoided.
Orientation (indicates PIN No.1)stripe
Stopper (green)
Stopper (red)
Relay polarity bar
(Z type)
Tape coming out direction
General tolerance
±0.1 mm .004 inch
4.00
1.75
0.40
10.70
±0.2
2.00
2.00 dia.
GN relays
16.00
8.00
11.50
24.00
±0.3
11.10
1.50
+0.1
0
dia.
.059
+.004
0
dia.
.157
.069
.016
.421
±.008
.079
.079 dia.
.630
.315
.453
.945
±.012
.437
Relay polarity bar
(Z type)
Tape coming out direction
General tolerance
±0.1 mm .004 inch
1.50
+0.1
0
dia.
.059
+.004
0
dia.
2.0 dia.
4.00
1.75
10.70
±0.2
0.40
2.00
GN relays
16.00
6.3
11.50
11.10
24.00
±0.3
.079 dia.
.157
.069
.421
±.008
.016
.079
.630
.248
.453
.437
.945
±.012
21
±0.8 dia.
13
±0.2 dia.
24.4
+2
0
+.079
0
*100
±1 dia.
2.0
±0.2
Note:
*370
±2 dia.
2.0
±0.5
.827
±.031 dia.
.961
3.937
±.039 dia.
.079
±.008
14.567
±.079 dia.
.079
±.020
.512
±.008 dia.
Dimensions of items produced after December 2006
have changed as shown below.
100±1 dia.
370±2 dia.
→ 80±1 dia.
→ 380±2 dia.
3.150±.039 dia.;
14.961±.079 dia.
3.937±.039 dia.
14.567±.079 dia.
A
C
B
;
;;
;
All Rights Reserved COPYRIGHT Matsushita Electric Works, Ltd.
相关PDF资料 |
PDF描述 |
|---|---|
| AGN210A06X | POWER/SIGNAL RELAY, DPDT, LATCHED, 0.017A (COIL), 6VDC (COIL), 100mW (COIL), 1A (CONTACT), 110VDC (CONTACT), SURFACE MOUNT-STRAIGHT |
| AGN210A09X | POWER/SIGNAL RELAY, DPDT, LATCHED, 0.011A (COIL), 9VDC (COIL), 100mW (COIL), 1A (CONTACT), 110VDC (CONTACT), SURFACE MOUNT-STRAIGHT |
| AGN210A12X | POWER/SIGNAL RELAY, DPDT, LATCHED, 0.008A (COIL), 12VDC (COIL), 100mW (COIL), 1A (CONTACT), 110VDC (CONTACT), SURFACE MOUNT-STRAIGHT |
| AGN210A1HX | POWER/SIGNAL RELAY, DPDT, LATCHED, 0.067A (COIL), 1.5VDC (COIL), 100mW (COIL), 1A (CONTACT), 110VDC (CONTACT), SURFACE MOUNT-STRAIGHT |
| AGN210A24X | POWER/SIGNAL RELAY, DPDT, LATCHED, 0.005A (COIL), 24VDC (COIL), 120mW (COIL), 1A (CONTACT), 110VDC (CONTACT), SURFACE MOUNT-STRAIGHT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AGN210A03Z | 功能描述:低信号继电器 - PCB 2 Form C 1 Form A 30VDC SMD 3V RoHS:否 制造商:NEC 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 V 最大开关电流:1 A 线圈电流:1 A 线圈类型:Non-Latching 功耗:140 mW 端接类型:SMT 绝缘: 介入损耗: |
| AGN210A03ZJ | 制造商:Panasonic Electric Works 功能描述: |
| AGN210A06 | 功能描述:低信号继电器 - PCB 2 Form C 1 Form A 30VDC SMD 6V RoHS:否 制造商:NEC 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 V 最大开关电流:1 A 线圈电流:1 A 线圈类型:Non-Latching 功耗:140 mW 端接类型:SMT 绝缘: 介入损耗: |
| AGN210A06J | 制造商:Panasonic Electric Works 功能描述: |
| AGN210A06X | 功能描述:低信号继电器 - PCB 2 Form C 1 Form A 30VDC SMD 6V RoHS:否 制造商:NEC 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 V 最大开关电流:1 A 线圈电流:1 A 线圈类型:Non-Latching 功耗:140 mW 端接类型:SMT 绝缘: 介入损耗: |
发布紧急采购，3分钟左右您将得到回复。