参数资料
型号: AH102A
厂商: TRIQUINT SEMICONDUCTOR INC
元件分类: 放大器
英文描述: 350 MHz - 3000 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER
封装: TO-243C, SOT-89, 3 PIN
文件页数: 5/5页
文件大小: 235K
代理商: AH102A
Specifications and information are subject to change without notice
WJ Communications, Inc
Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: sales@wj.com Web site: www.wj.com
Page 5 of 5 July 2006
AH102A
Medium Power, High Linearity Amplifier
Product Information
The Communications Edge
TM
AH102A-G (Green / Lead-free SOT-89 Package) Mechanical Information
This package is lead-free/Green/RoHS-compliant. It is compatible with both lead-free (maximum 260
°C reflow temperature) and leaded
(maximum 245
°C reflow temperature) soldering processes. The plating material on the leads is NiPdAu.
Outline Drawing
Land Pattern
Thermal Specifications
Parameter
Rating
Operating Case Temperature
-40 to +85
°C
Thermal Resistance, Rth
(1)
25
°C / W
Junction Temperature, Tjc
(2)
130
°C
1. The thermal resistance is referenced from the hottest
part of the junction to the ground tab (pin 4).
2. This corresponds to the typical biasing condition of
+9V, 200 mA at an 85
°C case temperature. A
minimum MTTF of 1 million hours is achieved for
junction temperatures below 160
°C.
Product Marking
The AH102A-G will be marked with a
“102AG” designator and an alphanumeric lot
code. The obsolete tin-lead package is marked
with a “102A” designator with an alphanumeric
lot code and a “0” on the right side of the
device.
Tape and reel specifications for this part are
located on the website in the “Application
Notes” section.
MSL / ESD Rating
ESD Rating: Class 1C
Value:
Passes
≥ 1000V min.
Test:
Human Body Model (HBM)
Standard:
JEDEC Standard JESD22-A114
ESD Rating: Class IV
Value:
Passes
≥ 1000V min.
Test:
Charged Device Model (CDM)
Standard:
JEDEC Standard JESD22-C101
MSL Rating: Level 3 at +260
°C convection reflow
Standard:
JEDEC Standard J-STD-020
Mounting Config. Notes
1. Ground / thermal vias are critical for the proper
performance of this device.
Vias should use a .35mm
(#80 / .0135”) diameter drill and have a final plated thru
diameter of .25 mm (.010”).
2. Add as much copper as possible to inner and outer layers
near the part to ensure optimal thermal performance.
3. Mounting screws can be added near the part to fasten the
board to a heatsink. Ensure that the ground / thermal via
region contact the heatsink.
4. Do not put solder mask on the backside of the PC board in
the region where the board contacts the heatsink.
5. RF trace width depends upon the PC board material and
construction.
6. Use 1 oz. Copper minimum.
7. All dimensions are in millimeters (inches). Angles are in
degrees.
MTTFvs. GNDTabTemperature
1
10
100
1000
60
70
80
90
100
110
120
TabTemperature (°C)
相关PDF资料
PDF描述
AH110-89G 50 MHz - 2000 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER
AH175-WLA-B MAGNETIC FIELD SENSOR-HALL EFFECT, -8-8mT, 300-400mV, RECTANGULAR, SURFACE MOUNT
AH175-WL-A MAGNETIC FIELD SENSOR-HALL EFFECT, -6-6mT, 300-400mV, RECTANGULAR, SURFACE MOUNT
AH180-WG-A MAGNETIC FIELD SENSOR-HALL EFFECT, -3--4mT, 0.10-0.30V, RECTANGULAR, SURFACE MOUNT
AH180-PG-7 MAGNETIC FIELD SENSOR-HALL EFFECT, -3--4mT, 0.10-0.30V, RECTANGULAR, THROUGH HOLE MOUNT
相关代理商/技术参数
参数描述
AH102A-1G 制造商:TriQuint Semiconductor 功能描述:GAIN BLOCK
AH102AG 制造商:WJ 功能描述:
AH102A-G 功能描述:射频放大器 350-3000MHz 14.5dB Gain RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel
AH102A-PCB2000 功能描述:射频开发工具 1800-2200MHz Brd 13.5dB Gain RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V
AH102A-PCB900 功能描述:射频开发工具 900MHz Eval Brd 14.5dB Gain RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V