- 您现在的位置：买卖IC网 > PDF目录18938 > AH148061-A (Panasonic Electric Works)SWITCH MINI SPDT PLUNG GOLD PCB PDF资料下载
参数资料
| 型号： | AH148061-A |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 5/5页 |
| 文件大小： | 0K |
| 描述： | SWITCH MINI SPDT PLUNG GOLD PCB |
| 标准包装： | 50 |
| 系列： | AH1 |
| 电路： | 单刀双掷 |
| 开关功能： | 开-瞬时 |
| 触点额定电压： | 0.1A @ 125VAC |
| 触动器类型： | 圆形（针状冲杆） |
| 安装类型： | 通孔 |
| 端接类型： | PC 引脚 |
| 操作力： | 74gf |
AH1
2.0
2. Solder terminal
Pin plunger
+0.12
0
mm
CAD Data
1.5 ± 0.1
5.0
2.0
2.2 +0.12
2 +0.12 dia.
0.5
1.2
6.5 ± 0.1
5.08 ± 0.15
5.08 ± 0.15
2.2
6-C0.3
t=0.4
12.8 ± 0.15
Remark: As for other actuator types, dimensions are the same as those of corresponding standard PC board terminal type.
3. PC board terminal (Right/Left angle type)
Pin plunger
CAD Data
C0.3
Right angle
Recommended PC board pattern
(top view)
3-1.2 ± 0.05 dia.
2.93
Left angle
5.08 ± 0.1
(Button position)
10.16 ± 0.15
5 ± 0.1 5
Pin
plunger
5.4 ± 0.3
1
(P.T.)
0.5 max.
(O.P.)
5.5 ± 0.2
2.8
2 +0.12
1.5 ± 0.1
2.2 +0.12
2 +0.12 dia .
1.6
( 3.3 )
6.5 ± 0.1
0.9
6 ± 0.15
3.1
t=0.4
5.08 ± 0.15
5.08 ± 0.15
Left angle
Right angle
12.8 ± 0.15
Remark: As for other actuator types, dimensions are the same as those of corresponding standard PC board terminal type.
NOTES
1. Fixing
1) Use 2mm mounting screws to attach
switches with Max. 0.098 N·m torque.
Use of screw washers or adhesive lock is
recommended.
2) When the operation object is in the
free position, force should not be applied
directly to the actuator or to the pin
plunger. Also force should be applied to
the pin plunger from vertical direction to
the switch.
3) In setting the movement after
operation, the over-travel should be set
from 70% to 100%. Setting the
movement less than 70% may cause
degrading of the electrical mechanical
performance.
2. When specifying AH1 switches,
allow ± 20% to the listed operating and
release forces.
3. Soldering operation
Manual soldering should be
accomplished within 3 seconds with max.
350 ° C iron.
Terminal portions must not be moved in
min.1 minute after soldering.
Also no tensile strength of lead wires
should be applied to terminals.
4. When switching low-level circuits,
AH1 low-level circuit type is
recommended.
AECTB15E 201201-T
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
相关PDF资料 |
PDF描述 |
|---|---|
| ASEMB-12.000MHZ-LY-T | OSC MEMS 12.000 MHZ SMD |
| AH1464-A | SWITCH MINI SPDT ROLLER PCB |
| AH14649-A | SWITCH MINI SPDT ROLLER PCB |
| 608-1132-240F | LED PNL IND 8MM RED 24V SNAP-FIT |
| AH146061-A | SWITCH MINI SPDT PLUNG GOLD PCB |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AH14809 | 制造商:Panasonic Electric Works 功能描述:Switch Snap Action N.O./N.C. SPDT Pin Plunger PC Pins 1A 125VAC 30VDC 0.74N Thru-Hole Tube |
| AH14809A | 制造商:Panasonic Electric Works 功能描述:Switch,pin plunger,0.74N,PCB,silver cont |
| AH14809-A | 功能描述:基本/快动开关 SPDT Pin Plunger PCB RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
| AH14809AT | 制造商:Panasonic Electric Works 功能描述: |
| AH1480A | 制造商:Panasonic Electric Works 功能描述:Switch,pin plunger,0.74N,PCB,silver cont |
发布紧急采购，3分钟左右您将得到回复。