参数资料
型号: AH2
元件分类: 放大器
英文描述: 50 MHz - 1000 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER
封装: TO-243C, SOT-89, 4 PIN
文件页数: 5/6页
文件大小: 551K
代理商: AH2
Specifications and information are subject to change without notice.
WJ Communications, Inc
¤
Phone 1-800-WJ1-4401
¤
FAX: 408-577-6621
¤
e-mail: sales@wj.com
¤
Web site: www.wj.com
Page 5 of 6 June 2005
AH2
High Dynamic Range Amplifier
Product Information
The Communications Edge TM
AH2 (SOT-89 Package) Mechanical Information
This package may contain lead-bearing materials. The plating material on the leads is SnPb.
Outline Drawing
Land Pattern
Thermal Specifications
Parameter
Rating
Operating Case Temperature
-40 to +85
qC
Thermal Resistance, Rth (1)
59
q C / W
Junction Temperature, Tjc (2)
129
q C
1. The thermal resistance is referenced from the hottest
part of the junction to the ground tab (pin 4).
2. This corresponds to the typical biasing condition of
+5V, 150 mA at an 85
C case temperature.
A
minimum MTTF of 1 million hours is achieved for
junction temperatures below 160
C.
Product Marking
The AH2 will be marked with an “AH2”
designator.
An alphanumeric lot code
(“XXXX-X” ) is also marked below the part
designator on the top surface of the package.
A “0” will be lasermarked in the upper right-
hand corner.
Tape and reel specifications for this part are
located on the website in the “Application
Notes” section.
MSL / ESD Rating
ESD Rating: Class 1B
Value:
Passes
500V to <1000V
Test:
Human Body Model (HBM)
Standard:
JEDEC Standard JESD22-A114
ESD Rating: Class IV
Value:
Passes
1000V to <2000V
Test:
Charged Device Model (CDM)
Standard:
JEDEC Standard JESD22-C101
MSL Rating: Level 3 at +235
C convection reflow
Standard:
JEDEC Standard J-STD-020
Mounting Config. Notes
1. Ground / thermal vias are critical for the proper
performance of this device. Vias should use a .35mm
(#80 / .0135” ) diameter drill and have a final plated
thru diameter of .25 mm (.010” ).
2. Add as much copper as possible to inner and outer
layers near the part to ensure optimal thermal
performance.
3. Mounting screws can be added near the part to fasten
the board to a heatsink. Ensure that the ground /
thermal via region contacts the heatsink.
4. Do not put solder mask on the backside of the PC board
in the region where the board contacts the heatsink.
5. RF trace width depends upon the PC board material
and construction.
6. Use 1 oz. Copper minimum.
7. All dimensions are in millimeters (inches). Angles are
in degrees.
MTTF vs. GND Tab Temperature
1
10
100
1000
60
70
80
90
100
110
Tab Temperature (°C)
M
T
F
(m
il
li
o
n
h
rs
)
相关PDF资料
PDF描述
AH2 50 MHz - 1000 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER
AH312-1S8G 400 MHz - 2300 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER
AH312-1S8G 400 MHz - 2300 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER
AH312 400 MHz - 2300 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER
AH312 400 MHz - 2300 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER
相关代理商/技术参数
参数描述
A-H2 制造商:RHOPOINT 制造商全称:RHOPOINT COMPONENTS 功能描述:Precision Resistors
AH2000 制造商:Cooper Wiring Devices 功能描述:
AH20010 制造商:ZETTLER Magnetics Inc 功能描述:
AH20012 制造商:ZETTLER Magnetics Inc 功能描述: 制造商:ZETTLER Magnetics Inc 功能描述:AH20012
AH20016 制造商:Zettler Magnetics 功能描述:Single 115V 6-Pin Power PCB Transformer - Horizontal Split Bobbin 制造商:ZETTLER MAGNETICS 功能描述:TRANSFORMER