- 您现在的位置：买卖IC网 > PDF目录21620 > AHN22205 (Panasonic Electric Works)RELAY GENERAL PURPOSE DPDT 5A 5V PDF资料下载
参数资料
| 型号： | AHN22205 |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 6/6页 |
| 文件大小： | 0K |
| 描述： | RELAY GENERAL PURPOSE DPDT 5A 5V |
| 其它有关文件： | Standards Chart |
| 标准包装： | 50 |
| 系列： | AHN |
| 继电器类型： | 通用 |
| 线圈类型： | 无锁存 |
| 线圈电流： | 106.4mA |
| 线圈电压： | 5VDC |
| 触点形式： | DPDT（2 C 型） |
| 触点额定值（电流）： | 5A |
| 切换电压： | 250VAC，30VDC - 最小值 |
| 关闭电压（最大）： | 3.5 VDC |
| 关闭电压（最小）： | 0.5 VDC |
| 特点： | 二极管 |
| 安装类型： | 可插 |
| 端接类型： | 插入式 |
| 包装： | 管件 |
| 触点材料： | 银镍（AgNi） |
| 操作时间： | 15ms |
| 释放时间： | 20ms |
| 线圈功率： | 530 mW |
| 线圈电阻： | 47 欧姆 |
| 工作温度： | -40°C ~ 70°C |
| 相关产品： | 255-1802-ND - SOCKET SCREW TERM FOR HN2 RELAY |
HN (AHN)
NOTES
1. Coil applied voltage
To ensure proper operation, the voltage
applied to both terminals of the coil
should be ± 5% (at 20 ° C 68 ° F ) the rated
operating voltage of the coil.
Also, be aware that the pick-up and drop-
out voltages will ?uctuate depending on
the ambient temperature and operating
conditions.
2. LED indications
The light of the light emitting diode is
what displays operation. If voltage
remains after relay dropout, the LED
might illuminate brie?y.
3. Switching lifetime
The switching lifetime is de?ned under
the standard test condition speci?ed in
the JIS C 5442(*2) standard (temperature
15 to 35 ° C 59 to 95 ° F , humidity 25 to
75% R.H.). Check this with the real
5. Conditions for operation, transport
and storage
1) Ambient temperature, humidity, and
atmospheric pressure during usage,
transport, and storage of the relay:
(1) Temperature:
–40 to +70 ° C – 40 to +158 ° F
(2) Humidity: 5 to 85% RH
(Avoid freezing and condensation.)
The humidity range varies with the
temperature. Use within the range
indicated in the graph below.
Temperature and humidity range for
usage, transport, and storage
Humidity, %R.H.
85
Tolerance range
(Avoid freezing (Avoid
when used at condensation
7. Diode type
Since the diode inside the relay coil are
designed to absorb the counter emf, the
element may be damaged if a large
surge, etc., is applied to the diode.
If there is the possibility of a large surge
voltage from the outside, please
implement measures to absorb it.
8. Please connect DC coil types with
LED and built-in diode correctly by
verifying the coil polarity (“+” and “–
”). Connecting with reverse polarity
will cause the LED not to light and
damage the built-in diode due to its
speci?cation.
9. Installation
If you will be installing adjacent to other
relays, please keep a distance of at least
5 mm from the relay.
device as it is affected by coil driving
circuit, load type, activation frequency,
activation phase,ambient conditions and
temperatures
lower than
0 ° C 32 ° F )
5
when used at
temperatures
higher than
0 ° C 32 ° F )
other factors.
Also, be especially careful of loads such
–40
–40
0
+32
Temperature, ° C ° F
70
+158
as those listed below.
1) When used for AC load-operating and
the operating phase is synchronous.
Rocking and fusing can easily occur due
to contact shifting.
2) High-frequency load-operating
When high-frequency opening and
closing of the relay is performed with a
load that causes arcs at the contacts,
nitrogen and oxygen in the air is fused by
the arc energy and HNO 3 is formed. This
can corrode metal materials.
Three countermeasures for these are
listed here.
(1) Incorporate an arc-extinguishing
circuit.
(2) Lower the operating frequency
(3) Lower the ambient humidity
4. Direct mount type (TM type)
If the current to the connection terminal
will exceed 10 A, we recommend
connecting with solder. If you are going to
use a tab terminal when the current will
exceed 10 A, make sure to verify the
temperature rise on the receptacle side
under actual conditions before using.
Please be careful, because excessive
stress on the TM terminal can cause
?uctuations in characteristics and
damage.
(3) Atmospheric pressure: 86 to 106 kPa
2) Condensation
Condensation forms when there is a
sudden change in temperature under
high temperature and high humidity
conditions. Condensation will cause
deterioration of the relay insulation.
3) Freezing
Condensation or other moisture may
freeze on the relay when the
temperatures is lower than 0 ° C 32 ° F . This
causes problems such as sticking of
movable parts or operational time lags.
4) Low temperature, low humidity
environments
The plastic becomes brittle if the relay is
exposed to a low temperature, low
humidity environment for long periods of
time.
6. Diode characteristics
1) Reverse breakdown voltage:
Min. 1,000V (with diode type)
Min. 400V (with diode and LED indication
type)
ASCTB5E 201212-T
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e/
相关PDF资料 |
PDF描述 |
|---|---|
| AHN210Y2 | RELAY GEN PURPOSE DPDT 5A 240V |
| AHN210Y0 | RELAY GEN PURPOSE DPDT 5A 220V |
| AT417C | CAP ROUND .346" RED FOR DLB SER |
| AT464C | CAP SPOT ILLUM .748" DIA RED DLB |
| HJ2-L-T-AC12V | RELAY GEN PURPOSE DPDT 10A 12V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AHN22205J | 制造商:Panasonic Electric Works 功能描述: |
| AHN22205N | 功能描述:RELAY GENERAL PURPOSE DPDT 5A 5V 制造商:panasonic electric works 系列:AHN 包装:管件 零件状态:在售 继电器类型:通用 线圈类型:无锁存 线圈电流:106.4mA 线圈电压:5VDC 触头外形:DPDT（2 C 型） 额定接触（电流）:5A 开关电压:250VAC，30VDC - 最大 导通电压（最大值）:3.5 VDC 关闭电压（最小值）:0.5 VDC 工作时间:15ms 释放时间:20ms 特性:二极管 安装类型:可插 端子类型:插入式 工作温度:-40°C ~ 70°C 触头材料:银镍（AgNi） 线圈功率:530 mW 线圈电阻:47 Ohms 标准包装:50 |
| AHN22206 | 功能描述:通用继电器 Plug-in DC6V w/Diode 2 Form C, 6VDC RoHS:否 制造商:Omron Electronics 触点形式:1 Form A (SPST-NO) 触点电流额定值:150 A 线圈电压:24 VDC 线圈电阻:144 Ohms 线圈电流:167 mA 切换电压:400 V 安装风格:Chassis 触点材料: |
| AHN22206J | 制造商:Panasonic Electric Works 功能描述: |
| AHN22206N | 功能描述:AHN NEW 2 FORM C 制造商:panasonic electric works 系列:* 零件状态:有效 标准包装:50 |
发布紧急采购，3分钟左右您将得到回复。