- 您现在的位置：买卖IC网 > Datasheet目录202 > AJ7212BTVF (Panasonic Electric Works)SWITCH ROCKER DPST 10A 250V Datasheet资料下载
参数资料
| 型号： | AJ7212BTVF |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 8/9页 |
| 文件大小： | 0K |
| 描述： | SWITCH ROCKER DPST 10A 250V |
| 标准包装： | 100 |
| 系列： | AJ7 |
| 电路： | 双刀单掷 |
| 开关功能： | 开-关 |
| 额定电流： | 10A（AC） |
| 额定电压 - AC： | 250V |
| 致动器样式： | 凹面（弯曲） |
| 颜色 - 致动器/盖： | 黑 |
| 致动器标志： | O - |
| 安装类型： | 面板安装，卡入式 |
| 端接类型： | 焊片 |
| 面板切口尺寸： | 长方形 - 19.20mm x 12.90mm |
| 包装： | 散装 |
| 工作温度： | -25°C ~ 85°C |
| 机械寿命： | 50,000 次循环 |
| 电气寿命： | 10,000 次循环 |
AJ7 (J7)
5. Wide actuator type
2-pole
1-pole
mm General tolerance: ± 0.5
Diagram of recommended locations
for panel mounting holes
X
2 1. 9 +0.1
21
32 °± 4 °
24
21.8
19
ON
OFF
Panel thickness
1 to less than 1.8
1.8 to 2.3
X
19.2 + ? 0 0.1
19.9 + ? 0 0.1
1.4 dia.
10
19
4.8
0.8
8.75
21
4.375
Remark: Dimensions for the terminals of soldering
terminal type and PC board terminal type
are the same as those of standard size type.
NOTES
1. Switch mounting
Mount the switch with the hole cutting
dimensions shown in the dimensions.
Contact us if you are considering using a
panel of other than the recommended
size and shape.
2. Regarding fastening lead wires to
terminals
1) When connecting the tab terminals,
use a .187 Quick-connect and insert the
terminals straight in.
If they are skewed, the terminals will
require excessive insertion force.
In addition, there is some variation in the
insertion force required for different
receptacles from different manufacturers,
so con?rm how much force is needed
under actual conditions.
Do not solder wires onto tab terminals.
2) With manual soldering: Complete the
soldering connection work within 3
seconds with the tip of the soldering iron
(60W soldering iron) at a temperature of
420°C or lower, and take care not to
apply any force to the terminal area.
REFERENCE
1. Outline of UL1054 test
Overload test AJ7: 15A 250V AC
(Power factor 0.75 to 0.8)
50 operation
Endurance test AJ7: 10A 250V AC
(Power factor 0.75 to 0.8)
6 × 10 3 operation
After testing, temperature rise of
terminals should be less than 30 ° C and
Avoid touching the switch with soldering
iron.
Soldering position
When wrapping or soldering a wire
around a terminal, do so in the shaded
area indicated in the diagram at left.
Contact terminal and ground terminal
Refer to the diagram above, “soldering
position,” for details on the position where
a wire should be soldered to a terminal.
When soldering PC board terminals,
keep soldering time to within 5 s at 270 ° C
soldering bath or within 3 s at 350 ° C
soldering bath.
3) The terminals should be connected in
such a way that they are not under
constant stress from the connecting
wires.
4) Terminal material is copper alloy which
may discolor due to ?nger’s oil or after a
long time. But that discoloration does not
effect actual performance.
2. Outline of EN61058-1 test
After switching 5 × 10 3 times on the below
load condition at both 85 + 50 ° C and
25 ± 10 ° C, temperature rise of terminals
should be less than 55 ° C and no
abnormality should be observed in
characteristics.
50 to 100ms
3. Resistance to chemicals
To clean the switch unit, use a neutral
detergent diluted with water.
Do not use acidic or alkaline solvents as
they may damage the switch.
Furthermore, be careful not to get any of
the detergent solution inside of the switch
while cleaning it.
4. Environment
Avoid using and storing these switches in
a location where they will be exposed to
corrosive gases, silicon, or high dust
levels, all of which can have an adverse
effect on the contacts.
5. Take care not to drop the product as
it may impair perfomance.
no abnormality should be observed in
characteristics.
24A
J7: 10A
AC: 250V
(Power factor 0.6)
2 sec.
4 sec.
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
AECTB3E 201201-T
相关PDF资料 |
PDF描述 |
|---|---|
| AJ8212BTVF | SWITCH ROCKER DPST 16A 250V |
| ALS50-12 | PWR SUPPLY 12VDC OUT 4.2A |
| ALS50-24 | PWR SUPPLY 24VDC OUT 2.1A |
| ALS50-3.3 | PWR SUPPLY 3.3VDC OUT 9.1A |
| ALS50-5 | POWER SUPPLY 5VDC OUT 9.0A |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AJ7229B06F | 制造商:Panasonic Electric Works 功能描述:SWITCH 250V,10A,AJ7229B06F |
| AJ7231BF | 功能描述:Rocker Switch DPST 10A (AC) 250V Panel Mount, Snap-In, Right Angle 制造商:panasonic electric works 系列:AJ7 包装:散装 零件状态:有效 电路:DPST 开关功能:??-关 额定电流:10A（AC） 额定电压 - AC:250V 额定电压 - DC:- 致动器类型:凹面（弯曲） 颜色 - 致动器/盖帽:黑 致动器标志:O I 照明类型，颜色:- 照明电压（标称值）:- 安装类型:面板安装，卡入式，直角 端子类型:PC 引脚 侵入防护:- 特性:- 面板开口尺寸:矩形 - 19.20mm x 12.90mm 工作温度:-25°C ~ 85°C 机械寿命:50，000 次循环 电气寿命:10，000 次循环 标准包装:100 |
| AJ7241BF | 功能描述:Rocker Switch DPST 10A (AC) 250V Panel Mount, Snap-In, Right Angle 制造商:panasonic electric works 系列:AJ7 包装:散装 零件状态:有效 电路:DPST 开关功能:??-关 额定电流:10A（AC） 额定电压 - AC:250V 额定电压 - DC:- 致动器类型:凹面（弯曲） 颜色 - 致动器/盖帽:黑 致动器标志:O I 照明类型，颜色:- 照明电压（标称值）:- 安装类型:面板安装，卡入式，直角 端子类型:PC 引脚 侵入防护:- 特性:- 面板开口尺寸:矩形 - 19.20mm x 12.90mm 工作温度:-25°C ~ 85°C 机械寿命:50，000 次循环 电气寿命:10，000 次循环 标准包装:100 |
| AJ7242BF | 制造商:Panasonic Electric Works 功能描述:Switch Rocker ON OFF DPST PC Pins Curved Rocker 10A 250VAC 50000Cycle |
| AJ7W102B | 功能描述:摇臂开关与扳钮开关 AJ7 Toggle Switch RoHS:否 制造商:C&K Components 触点形式: 开关功能: 电流额定值:50 mA 电压额定值 AC: 电压额定值 DC:30 V 功率额定值: 端接类型: 执行器:Paddle 颜色: 安装风格:Panel 端子密封: 触点电镀: 照明:Not Illuminated 照明颜色: |
发布紧急采购，3分钟左右您将得到回复。