- 您现在的位置：买卖IC网 > PDF目录253936 > AJ8R5013BCF ROCKER SWITCH, SPDT, LATCHED, PANEL MOUNT PDF资料下载
参数资料
| 型号： | AJ8R5013BCF |
| 元件分类： | 开关 |
| 英文描述： | ROCKER SWITCH, SPDT, LATCHED, PANEL MOUNT |
| 封装： | ROHS COMPLIANT |
| 文件页数： | 5/5页 |
| 文件大小： | 102K |
| 代理商： | AJ8R5013BCF |
AJ8R
NOTES
COIL TERMINAL CONNECTOR
1. Operating voltage application time
If the rated voltage is applied to the coil
for more than 10 seconds or the
maximum voltage is applied for more
than 1 second, coil performance may
deteriorate.
2. The shape of the mounting panel
should be as recommended in the
dimensions diagram.
Contact us if you are considering using a
panel of other than the recommended
size and shape.
3.The mounting panel should be made
of SPCC. If a different material is used,
its adhesion to the switch unit may not
be as strong. Check this on site if
necessary.
4. Note that the actuator could pop out
of the switch housing if 19.6N (2kgf) or
more of force is applied to the side of
the actuator.
5. Regarding fastening lead wires to
terminals
(1) When connecting the .250 Quick-
connect terminals, use a .250 receptacle
and insert the terminals straight in.
If you insert them at an angle, the
terminals could catch on the opening and
will require greater insertion force.
(2) The coil terminals have specic
polarities. Make sure you connect them
correctly.
(3) Use a receptacle that is compliant
with JIS C 2809.
In addition, there is some deviation
regarding the insertion force depending
on the model used from different
manufacturers, so the insertion force
should be checked under realistic
conditions.
(4) Use AMP’s CT connector for the coil
terminals.
6. Because special receptacle
terminals are used for the contact
terminals and the common terminals,
do not attempt to solder them. Doing
so could melt plastic components and
otherwise harm the performance of
the switch
7. The terminals should be connected
in such a way that they are not under
constant stress from the connecting
wires.
8. Take care not to drop the product as
it may impair performance.
9. Resistance to chemicals
To clean the switch unit, use a neutral
detergent diluted with water.
Do not use acidic or alkaline solvents as
they may damage the switch.
Furthermore, be careful not to get any of
the detergent solution inside of the switch
while cleaning it.
10. This product is not hermetically
sealed, so its performance could
deteriorate under certain ambient
conditions. Avoid using and storing
these switches in a location where
they will be exposed to corrosive
gases, silicon, or high dust levels, all
of which can have an adverse effect
on the contacts. In addition, because
these switches contain permanent
magnets, avoid using and storing
these switches in a location where
metallic dust, etc., is present.
11. When these switches are used with
weak currents of 500mA or less, a
layer of material on the surface of the
contacts may cause contact
instability. Check and evaluate this
possibility before using these
switches under such conditions.
12. When using an ON-OFF type
switch with no (
I O) indication on the
actuator, the “OFF” position should be
indicated on the set in which the
switch is installed.
13. To assure reliability, check the
switch under actual loading
conditions. Avoid any situation that
may adversely affect switching
performance.
Because CT terminals are used for the
coil terminals, AMP’s CT connector can
be used.
Remark: We do not sell this type of connector.
Questions concerning this connector should
be directed to the manufacturer.
AMP’s CT connector
receptacle socket
Pressure welding type:
173977-2: for AWG26, 28
2-179694-2: for AWG24
Crimping type:
179228-2
All Rights Reserved COPYRIGHT Matsushita Electric Works, Ltd.
相关PDF资料 |
PDF描述 |
|---|---|
| AP4C207TWBE | PUSHBUTTON SWITCH, SPST, MOMENTARY, 0.2A, 24VDC, PANEL MOUNT-THREADED |
| AP4C207TZBE | PUSHBUTTON SWITCH, SPST, MOMENTARY, 0.2A, 24VDC, PANEL MOUNT-THREADED |
| AP4C506SWBE | PUSHBUTTON SWITCH, SPST, MOMENTARY, 0.2A, 24VDC, PANEL MOUNT |
| A22E-S-03 | PUSHBUTTON SWITCH, 3PST, MOMENTARY, 10A, 24VDC, PANEL MOUNT |
| AP4N207TZBE | PUSHBUTTON SWITCH, SPST, MOMENTARY, 0.2A, 24VDC, PANEL MOUNT-THREADED |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AJ8W202B | 功能描述:摇臂开关与扳钮开关 SPDT ON-OFF 16A, QC RoHS:否 制造商:C&K Components 触点形式: 开关功能: 电流额定值:50 mA 电压额定值 AC: 电压额定值 DC:30 V 功率额定值: 端接类型: 执行器:Paddle 颜色: 安装风格:Panel 端子密封: 触点电镀: 照明:Not Illuminated 照明颜色: |
| AJ911012B3F | 功能描述:摇臂开关与扳钮开关 SPST, ON - OFF 16A, QC RoHS:否 制造商:C&K Components 触点形式: 开关功能: 电流额定值:50 mA 电压额定值 AC: 电压额定值 DC:30 V 功率额定值: 端接类型: 执行器:Paddle 颜色: 安装风格:Panel 端子密封: 触点电镀: 照明:Not Illuminated 照明颜色: |
| AJ911102B3F | 功能描述:摇臂开关与扳钮开关 SPST, ON - ON 16A, QC RoHS:否 制造商:C&K Components 触点形式: 开关功能: 电流额定值:50 mA 电压额定值 AC: 电压额定值 DC:30 V 功率额定值: 端接类型: 执行器:Paddle 颜色: 安装风格:Panel 端子密封: 触点电镀: 照明:Not Illuminated 照明颜色: |
| AJ91S | 制造商:Fuji Electric 功能描述: |
| AJ-A1A | 制造商:Leach International Corporation 功能描述:POWER - Bulk |
发布紧急采购，3分钟左右您将得到回复。