- 您现在的位置：买卖IC网 > PDF目录201299 > AK1001-7RT 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | AK1001-7RT |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE |
| 封装： | HEAT SINK, METAL, CASE K02, MODULE |
| 文件页数： | 6/31页 |
| 文件大小： | 637K |
| 代理商： | AK1001-7RT |
第1页第2页第3页第4页第5页当前第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页
Cassette Style
150 Watt DC-DC Converters
K Series
Edition 01/01.2000
14/31
Fig. 15
Typical output response as a function of inhibit control
Table 5: Inhibit characteristics
Characteristic
Conditions
min
typ
max Unit
Uinh Inhibit
Uo = on
Ui min…Ui max
–50
0.8
V
voltage
Uo = off
2.4
50
Iinh
Inhibit current
Uinh = 0
–400
A
tr
Rise time
30
ms
tf
Fall time
depending on
Io
0
t
0
Inhibit
1
0.1
1
Uo/Uo nom
tr
tf
06001
Sense Lines
(Only for single output units 5.1 V, 12 V, 15 V, 24 V)
This feature enables for compensation of voltage drops
across the connector contacts and if necessary, across the
load lines. If the sense lines are connected at the load
rather than directly at the connector, the user should ensure
that
Uo max (between Vo1+ and Vo1–) is not exceeded. We
recommend connecting the sense lines directly at the fe-
male connector.
For further information, please refer to:
Application Notes.
To ensure correct operation, both sense lines (S+ and S–)
should be connected to their respective power outputs
(Vo1+ and Vo1–) and the voltage difference between any
sense line and its respective power output pin (as meas-
ured on the connector) should not exceed the following val-
ues:
Table 6: Maximum voltage compensation allowed using
sense lines
Output
Total voltage difference
Voltage difference
voltage
between sense lines and
between
their respective outputs
Vo– and S–
5.1 V
< 0.5 V
< 0.25 V
12 V, 15 V
< 1.0 V
< 0.25 V
If the output voltages are increased above
Uo nom via R-in-
put control, option P setting, remote sensing or option T, the
output currents must be reduced accordingly so that
Po nom is not exceeded.
Note: The output terminals Vo1+ and Vo1– must always be
connected to the load before connecting the sense lines S+
and S–, otherwise the unit will be damaged.
Auxiliary Functions
i Inhibit for Remote On and Off
Note: With open i input: Output is disabled (
Uo = off).
The outputs of the module may be enabled or disabled by
means of a logic signal (TTL, CMOS, etc.) applied between
the inhibit input i and the negative pin of output 1 (Vo1–). In
systems with several units, this feature can be used, for ex-
ample, to control the activation sequence of the converters.
If the inhibit function is not required, connect the inhibit pin
18 to pin 14 to enable the outputs (active low logic, fail
safe). For output response refer to:
Hold-up Time and Out-
put Response.
Vi+
Vi–
Vo–
i
Vo+
Iinh
Uinh
06031
1.6
0.8
0
–0.8
–50
Uinh [V]
Iinh [mA]
–30
0
–10
10
30
50
2.0
1.2
0.4
–0.4
Uinh = 0.8 V
Uo = on
Uo = off
Uinh = 2.4 V
06032
Fig. 13
Definition of Uinh and Iinh.
Fig. 14
Typical inhibit current Iinh versus inhibit voltage Uinh
相关PDF资料 |
PDF描述 |
|---|---|
| AK1001-9PD1B1 | 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE |
| AK1001-9RD1T | 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE |
| AK1001-9RD5B1 | 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE |
| AK1001-9RD9B1 | 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE |
| AK1301-7RD0B1 | 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AK1001-9P | 制造商:POWER-ONE INC 功能描述:DC/DC CONVERTER:EURO-CASSETTE 150W 5.1V 制造商:Power-One 功能描述:DCDC - Bulk |
| AK1001-9R | 制造商:Power-One 功能描述:DCDC - Bulk |
| AK100-25 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog Attenuator |
| AK10-030C | 制造商:Littelfuse 功能描述:TVS AXIAL KA RATED 10KA 30V BI 制造商:Littelfuse 功能描述:TVS Diodes - Transient Voltage Suppressors 30V 10KA TVS BI Axial KA Rated 制造商:Littelfuse 功能描述:DIODE, TVS, 30V, BIDIRECTIONAL, AXIAL LEADED; TVS Polarity:Bidirectional; Reverse Stand-Off Voltage Vrwm:30V; Breakdown Voltage Min:32V; Breakdown Voltage Max:37V; Clamping Voltage Vc Max:58V; Peak Pulse Current Ippm:10kA ;RoHS Compliant: Yes |
| AK10-030C-12 | 功能描述:TVS DIODE 30VWM 58VC AXIAL 制造商:littelfuse inc. 系列:AK10 包装:散装 零件状态:有效 类型:齐纳 单向通道:- 双向通道:1 电压 - 反向关态（典型值）:30V 电压 - 击穿（最小值）:32V 电压 - 箝位（最大值）@ Ipp:58V 电流 - 峰值脉冲（10/1000μs）:10000A（10kA）（8/20μs） 功率 - 峰值脉冲:- 电源线路保护:无 应用:通用 不同频率时的电容:11nF @ 10kHz 工作温度:-55°C ~ 150°C（TJ） 安装类型:通孔 封装/外壳:轴向，直角弯曲（24.15mm 中心） 供应商器件封装:轴向 标准包装:12 |
发布紧急采购，3分钟左右您将得到回复。