- 您现在的位置：买卖IC网 > PDF目录255354 > AK1601-7PD5TB2 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | AK1601-7PD5TB2 |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE |
| 封装： | METAL, CASE K02, MODULE |
| 文件页数： | 22/31页 |
| 文件大小： | 637K |
| 代理商： | AK1601-7PD5TB2 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页当前第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页
Cassette Style
150 Watt DC-DC Converters
K Series
Edition 01/01.2000
29/31
V output (V0, V2, V3):
Connector pin V is internally connected to the open collec-
tor of a NPN transistor. The emitter is connected to the
negative potential of output 1.
UV
≤ 0.6 V (logic low) corre-
sponds to a monitored voltage level (
Ui and/or Uo1)
<U
t.
The current
IV through the open collector should not exceed
50 mA. The NPN output is not protected against external
overvoltages.
UV should not exceed 60 V.
Ui, Uo1 status
V output,
UV
Ui or Uo1 < Ut
low, L,
UV ≤ 0.6 V at IV = 50 mA
Ui and Uo1 > Ut + Uh
high, H,
IV ≤ 25 A at UV = 5.1 V
Fig. 34
Output configuration of options V0, V2 and V3
Vo1+
Vo1–
V
UV
IV
Rp
Input
11009
Formula for the external input capacitor:
2
Po (th + 0.3 ms) 100
Ci ext = –––––––––––––––––––––– – Ci min
h (Uti 2 – Ui min2)
where as:
Ci min = internal input capacitance [mF]
Ci ext = external input capacitance [mF]
Po
= output power [W]
h
= efficiency [%]
th
= hold-up time [ms]
Ui min = minimum input voltage [V] 1
Uti
= threshold level [V]
1 Min. input voltage according to Electrical Input Data. For output
voltages
Uo > Uo nom, the minimum input voltage increases pro-
portionally to
Uo/Uo nom.
Remarks:
Option V2 and V3 can be adjusted by potentiometer to a
threshold level between
Ui min and Ui max. A decoupling di-
ode should be connected in series with the input of AK...FK
converters to avoid the input capacitance discharging
through other loads connected to the same source voltage.
V ACFAIL signal (VME)
Available for units with
Uo1 = 5.1 V.
This option defines an undervoltage monitoring circuit for
the input or input and main output voltage (
Uo1 nom =5.1 V
only) equivalent to option D and generates an ACFAIL sig-
nal (V signal) which conforms to the VME standard.
The low state level of the ACFAIL signal is specified at a
sink current of
IV ≤ 48 mA to UV ≤ 0.6 V (open-collector out-
put of a NPN transistor). The pull-up resistor feeding the
open-collector output should be placed on the VME back
plane.
After the ACFAIL signal has gone low, the VME standard
requires a hold-up time
th of at least 4 ms before the 5.1 V
output drops to 4.875 V when the output is fully loaded.
This hold-up time
th is provided by the internal input capaci-
tance. Consequently the working input voltage and the
threshold level
Uti should be adequately above the mini-
mum input voltage
Ui min of the converter so that enough
energy is remaining in the input capacitance. If the input
voltage is below the required level, an external hold-up ca-
pacitor (
Ci ext) should be added.
Formula for threshold level for desired value of
th:
2
Po (th + 0.3 ms) 100
Uti =
––––––––––––––––––––– +
Ui min2
Ci min h
Table 20: Undervoltage monitor functions
V output
Monitoring
Minimum adjustment range
Typical hysteresis
Uh [% of Ut]
(VME compatible)
of threshold level
Ut
for
Ut min…Ut max
Ui
Uo1
Uti
Uto
Uhi
Uho
V2
yes
no
Ui min...Ui max 1
–
3.4...0.4
–
V3
yes
Ui min...Ui max 1
0.95...0.985
Uo1 2
3.4...0.4
"0"
V0
yes
no
Ui min...Ui max 3 4
–
3.4...0.4
–
yes
Ui min...Ui max 3 4
0.95...0.985
Uo1 2
3.4...0.4
"0"
1 Threshold level adjustable by potentiometer. 2 Fixed value between 95% and 98.5% of Uo1 (tracking). 3 Adjusted at Io nom.
4 Fixed value, resistor-adjusted (
±2% at 25°C) acc. to customer's specifications; individual type number is determined by Power-One.
voltage(s) exceed(s)
Ut + Uh. The threshold level Uti is ei-
ther adjustable by potentiometer, accessible through a hole
in the front cover, or adjusted during manufacture to a de-
termined customer specified value.
Versions V0, V2 and V3 are available as shown below.
Option V operates independently of the built-in input under-
voltage lock-out circuit. A logic "low" signal is generated at
pin 20 as soon as one of the monitored voltages drops be-
low the preselected threshold level
Ut. The return for this
signal is Vo1–. The V output recovers when the monitored
Table 19: Available internal input capacitance and factory potentiometer setting of Uti with resulting hold-up time
Types
AK
BKFK
CK
DKEK
Unit
Ci min
0.83
0.3
1.2
0.66
0.26
0.21
mF
Ut i
9.5
19.5
39
61
97
V DC
th
0.1
3.4
1.1
2.7
ms
相关PDF资料 |
PDF描述 |
|---|---|
| AK1601-7R | 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE |
| AK1601-9PD1T | 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE |
| AK1601-9P | 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE |
| AK2320-7RD2B1 | 2-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE |
| AK2320-9PT | 2-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AK1601-7R | 功能描述:DC/DC转换器 Euro-Cassette 150W (24V) RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| AK1601-9PG | 功能描述:DC/DC CONVERTER 制造商:bel power solutions 系列:* 零件状态:有效 标准包装:5 |
| AK1601-9R | 制造商:POWER-ONE INC 功能描述:DC/DC CONVERTER:EURO-CASSETTE 150W 24V 制造商:Power-One 功能描述:DCDC - Bulk |
| AK1601-9RT | 制造商:Power-One 功能描述: |
| AK-1604-N-BWB | 制造商:JAMECO VALUEPRO 功能描述:KEYPAD, 16 KEYS, MATRIX OUTPUT, |
发布紧急采购，3分钟左右您将得到回复。