- 您现在的位置：买卖IC网 > PDF目录21352 > ALTS3055 (Panasonic Electric Works)RELAY GENERAL PURPOSE SPST 5A 5V PDF资料下载
参数资料
| 型号： | ALTS3055 |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 4/4页 |
| 文件大小： | 0K |
| 描述： | RELAY GENERAL PURPOSE SPST 5A 5V |
| 产品变化通告： | LK-F Relays Discontinuation Mar/2012 |
| 标准包装： | 200 |
| 系列： | ALTS |
| 继电器类型： | 通用 |
| 线圈类型： | 无锁存 |
| 线圈电流： | 56.2mA |
| 线圈电压： | 5VDC |
| 触点形式： | SPST-NO（1 A 型） |
| 触点额定值（电流）： | 5A |
| 切换电压： | 277VAC - 最小值 |
| 关闭电压（最大）： | 3.75 VDC |
| 关闭电压（最小）： | 0.25 VDC |
| 安装类型： | 通孔 |
| 端接类型： | PC 引脚 |
| 包装： | 散装 |
| 触点材料： | 银锡氧化物（AgSnO） |
| 操作时间： | 15ms |
| 释放时间： | 5ms |
| 线圈功率： | 280 mW |
| 线圈电阻： | 89 欧姆 |
| 工作温度： | -40°C ~ 70°C |
| 其它名称： | 255-3089 |
Discontinued as of December 31, 201 1
LT-S
NOTES
Usage, transport and storage
conditions
1) Temperature:
–40 to +70 ° C –40 to +158 ° F
2) Humidity: 5 to 85% RH
(Avoid freezing and condensation.)
The humidity range varies with the
temperature. Use within the range
indicated in the graph below.
3) Atmospheric pressure: 86 to 106 kPa
Temperature and humidity range for
usage, transport, and storage
Humidity, %R.H.
Certi?cation
1) This relay is UL and C-UL certi?ed.
UL and C-UL standards: TV-5
5 A 277 V AC, 50,000 times
8 A 277 V AC, 10,000 times
2) This relay is certi?ed by VDE as an
electromagnetic relay that complies with
EN61810-1.
VDE standards: TV-5
5 A 250 V cos φ = 1.0, 50,000 times
8 A 250 V cos φ = 1.0, 10,000 times
3) This relay is certi?ed by SEMKO.
10/80 A 250 V AC 40T85 μ , 10,000 times
(Steady-state current: 10A/Inrush
load that causes arcs at the contacts,
nitrogen and oxygen in the air is fused by
the arc energy and HNO 3 is formed. This
can corrode metal materials.
Three countermeasures for these are
listed here.
? Incorporate an arc-extinguishing circuit.
? Lower the operating frequency
? Lower the ambient humidity
5) This value can change due to the
switching frequency, environmental
conditions, and desired reliability level,
therefore it is recommended to check this
with the actual load.
85
Tolerance range
(Avoid freezing (Avoid
when used at condensation
temperatures when used at
lower than temperatures
0 ° C 32 ° F ) higher than
0 ° C 32 ° F )
5
–40 0
–40 +32
Temperature, ° C ° F
70
+158
current: 80 A, Load voltage: 250 V AC,
Ambient temperature: –40 to +85 ° C –40
to +185 ° F , Micro-gap)
3/120 A 250 V AC 40T85 μ , 10,000 times
(Steady-state current: 3A/Inrush current:
120 A, Load voltage: 250 V AC, Ambient
temperature: –40 to +85 ° C –40 to
+185 ° F , Micro-gap)
5 A 250 V cos φ = 1.0, 50,000 times
8 A 250 V cos φ = 1.0, 10,000 times
6) Heat, smoke, and even a ?re may
occur if the relay is used in conditions
outside of the allowable ranges for the
coil ratings, contact ratings, operating
cycle lifetime, and other speci?cations.
Therefore, do not use the relay if these
ratings are exceeded.
7) If the relay has been dropped, the
appearance and characteristics should
always be checked before use.
4) Condensation
Condensation forms when there is a
sudden change in temperature under
high temperature and high humidity
conditions. Condensation will cause
deterioration of the relay insulation.
5) Freezing
Condensation or other moisture may
freeze on the relay when the
temperatures is lower than 0 ° C 32 ° F . This
causes problems such as sticking of
movable parts or operational time lags.
6) Low temperature, low humidity
environments
The plastic becomes brittle if the relay is
exposed to a low temperature, low
humidity environment for long periods of
time.
Solder and cleaning conditions
1) Please obey the following conditions
when soldering automatically.
(1) Preheating: Within 120 ° C 248 ° F
(solder surface terminal portion) and
within 120 seconds
(2) Soldering iron: 260 ° C ± 5 ° C
500 ° F ± 41 ° F (solder temperature) and
within 6 seconds (soldering time)
2) Since this is not a sealed type relay, do
not clean it as is. Also, be careful not to
allow ?ux to over?ow above the PC board
or enter the inside of the relay.
Others
1) For precautions regarding use and
explanations of technical terminology,
please refer to our web site.
(http://industrial.panasonic.com/ac/e/)
2) To ensure good operation, please keep
the voltage on the coil ends to ± 5% (at
20 ° C 68 ° F ) of the rated coil operation
voltage. Also, please be aware that the
pick-up voltage and drop-out voltage may
change depending on the temperature
and conditions of use.
3) Keep the ripple rate of the nominal coil
voltage below 5%.
4) The cycle lifetime is de?ned under the
standard test condition speci?ed in the
JIS C 5442 standard (temperature 15 to
35 ° C 59 to 95 ° F , humidity 25 to 75%).
Check this with the real device as it is
affected by coil driving circuit, load type,
activation frequency, activation phase,
ambient conditions and other factors.
Also, be especially careful of loads such
as those listed below.
(1) When used for AC load-operating and
the operating phase is synchronous.
Rocking and fusing can easily occur due
to contact shifting.
(2) Highly frequent load-operating
When highly frequent opening and
closing of the relay is performed with a
8) Incorrect wiring may cause
unexpected events or the generation of
heat or ?ames.
9) There are no restrictions as to how this
relay should be oriented during
installation. However, due to gravitation
there may be slight differences in pick-up/
drop-out voltage and operate/release
time, etc., depending on the orientation.
Therefore, when evaluating the relay,
please do so with the relay installed with
the actual orientation.
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e/
ASCTB202E 201201-T
相关PDF资料 |
PDF描述 |
|---|---|
| SFA-1834 | PANEL SURFACE SHIELD ALUM .12" |
| RAVF164DJT120R | RES ARRAY 120 OHM 4 RES 1206 |
| C-14441 | COVER SMALL RACK MOUNT SOLID |
| RAVF164DJT12R0 | RES ARRAY 12 OHM 4 RES 1206 |
| 1585H16D1 | POWER STRIP 48" 15A 16OUT 15' |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ALTS3125 | 功能描述:RELAY GEN PURPOSE SPST 5A 12V RoHS:是 类别:继电器 >> 功率，高于 2 安 系列:ALTS 产品目录绘图:Slim CT Series Footprint Slim CT Series Circuit Slim CT Series 标准包装:30 系列:ACT 继电器类型:自动 线圈类型:无锁存 线圈电流:66.7mA 线圈电压:12VDC 触点形式:SPDT（1 C 型） 触点额定值（电流）:20A 切换电压:14VDC -标称 关闭电压（最大）:7.2 VDC 关闭电压（最小）:1 VDC 特点:- 安装类型:通孔 端接类型:PC 引脚 包装:管件 触点材料:银合金，无镉 操作时间:10ms 释放时间:10ms 线圈功率:800 mW 线圈电阻:180 欧姆 工作温度:-40°C ~ 85°C 产品目录页面:2609 (CN2011-ZH PDF) 其它名称:255-2591ACT112-ND |
| ALTV244UL-W1 | 制造商:Black Box Corporation 功能描述:1 YEAR WARRANTY FOR ALTV244UL |
| ALTV244UL-W3 | 制造商:Black Box Corporation 功能描述:3 YEAR WARRANTY FOR ALTV244UL |
| ALTV248UL-W1 | 制造商:Black Box Corporation 功能描述:1 YEAR WARRANTY FOR ALTV248UL |
| ALTV248UL-W3 | 制造商:Black Box Corporation 功能描述:3 YEAR WARRANTY FOR ALTV248UL |
发布紧急采购，3分钟左右您将得到回复。