- 您现在的位置：买卖IC网 > PDF目录255362 > AM1501-9RV3F (POWER-ONE INC) 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | AM1501-9RV3F |
| 厂商： | POWER-ONE INC |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| 封装： | METAL, CASE M02, MODULE |
| 文件页数： | 11/25页 |
| 文件大小： | 569K |
| 代理商： | AM1501-9RV3F |
Cassette Style
DC-DC Converters
M Series
Edition 01/01.2001
19/25
Table 18: Configuration of option A and option P
Type of option
AM...LM/CMZ...LMZ 1000
AM...LM/CMZ...LMZ 2000
AM...LM/CMZ...LMZ 3000
Output 1
Output 2
Output 1
Output 2
Output 3
Potentiometer 1
yes
no
Test sockets
yes
no
1 AM...LM 1000 types equipped with option P do not provide the R input simultaneously, pins 14 and 17 are not connected.
-9 Extended Temperature Range
Option -9 extends the operational ambient temperature
range from –25...71
°C (standard) to –40...71°C. The power
supplies provide full nominal output power with convection
cooling.
A Test Sockets
Test sockets (pin = 2 mm, distance d = 5.08 mm) are lo-
cated at the front of the module. The output voltage is
sensed at the connector pins inside the module.
P Potentiometer
Optionally built-in multi-turn potentiometers provide an out-
put voltage adjustment range of minimum
±5% of U
o nom
and are accessible through holes in the front cover. Com-
pensation of voltage drop across connector and wiring be-
comes easily achievable. For output voltages
Uo > Uo nom,
the minimum input voltage according to:
Electrical Input
Data increases proportionally to Uo/Uo nom.
Note: Potentiometers are not recommended for mobile ap-
plications.
Description of Options
Table 17: Survey of options
Option
Function of option
Characteristic
–9
Extended operational ambient temperature range
TA = –40...71°C
A
Test sockets at front panel for check of output voltage
Uo internally measured at the connector terminals
E
Electronic inrush current limitation circuitry
Active inrush current limitation for CM, EM, LM, CMZ, LMZ
P 1
Potentiometer for fine adjustment of output voltage
Adjustment range
±5% of U
o nom, excludes R input
F
Input fuse built-in inside case
Fuse not externally accessible
H
Enhanced output to case electric strength test voltage
2000 V AC (standard: 1000 V AC)
D 2
Input and/or output undervoltage monitoring circuitry
Safe data signal output (D0...D9)
V 2 3
Input and/or output undervoltage monitoring circuitry
ACFAIL signal according to VME specifications (V0, V2, V3)
1 Function R excludes option P and vice versa
2 Option D excludes option V and vice versa
3 Only available if main output voltage Uo1 = 5.1 V
AC-DC
front
end
DC-DC
con-
verter
Mains
Battery
SELV
Earth connection
(class I)
+
–
~
10018
Max. 250 V AC or
400 (250) V DC
Max. 250 V AC or
400 (250) V DC
Fuse
Fig. 18
Schematic safety concept.
Use earth connection as per table:
Safety concept leading
to an SELV output circuit. Use fuse if required by the appli-
cation. See also:
Installation Instructions.
Standards and Approvals
AM...LM DC-DC converters correspond to class I equip-
ment, while CMZ, DMZ, LMZ types correspond to class II
equipment. All types are UL recognized according to UL
1950, UL recognized for Canada to CAN/CSA C22.2 No.
950-95 and LGA approved to IEC/EN 60950 standards.
The units have been evaluated for:
Building in
Basic insulation between input and case and double or
reinforced insulation between input and output, based on
250 V AC and 400 V DC (class I equipment)
Double or reinforced insulation between input and case
and between input and output, based on 250 V AC and
DC (class II equipment)
Operational insulation between output(s) and case
Operational insulation between the outputs
The use in a pollution degree 2 environment
Connecting the input to a primary or secondary circuit
with a maximum transient rating of 2500 V
The DC-DC converters are subject to manufacturing sur-
veillance in accordance with the above mentioned UL,
CSA, EN and with ISO 9001 standards.
相关PDF资料 |
PDF描述 |
|---|---|
| AM1601-9PV0AHF | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| AM1601-9RA | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| AM1901-7RV0AF | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| AM1901-7RV2A | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| AM2320-9PA | 2-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AM1501F | 制造商:PANASONIC 制造商全称:Panasonic Semiconductor 功能描述:HIGH CONTACT CAPACITY, PRECISE OPERATION |
| AM1501KF | 功能描述:基本/快动开关 Hinge LVR, Solder RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
| AM1503F | 制造商:Panasonic Electric Works 功能描述: |
| AM1503KF | 制造商:Panasonic Electric Works 功能描述:Switch,hinge roller lever,std type,sld |
| AM1504F | 功能描述:SWITCH SNAP ACTION SPDT 10A 125V 制造商:panasonic electric works 系列:AM1 包装:散装 零件状态:有效 电路:SPDT 开关功能:开-瞬时 额定电流:10A（AC），500mA（DC） 额定电压 - AC:125V 额定电压 - DC:125V 致动器类型:按片，滚轴 安装类型:底座安装 端子类型:焊片 侵入防护:- 特性:无镉 操作力，扭矩:160gf 释放力:43gf 预行程:0.178"（4.5mm） 差动行程:0.027"（0.7mm） 超行程:0.094"（2.4mm） 工作位置:1.188"（30.2mm） 机械寿命:5，000，000 次循环 电气寿命:500，000 次循环 工作温度:-25°C ~ 80°C 标准包装:20 |
发布紧急采购，3分钟左右您将得到回复。