- 您现在的位置：买卖IC网 > PDF目录18759 > AM1743K (Panasonic Electric Works)SWITCH BASIC 15A ROLLER SCREW PDF资料下载
参数资料
| 型号： | AM1743K |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 8/8页 |
| 文件大小： | 0K |
| 描述： | SWITCH BASIC 15A ROLLER SCREW |
| 标准包装： | 10 |
| 系列： | AM1 |
| 电路： | 单刀双掷 |
| 开关功能： | 开-瞬时 |
| 触点额定电压： | 15A @ 125VAC |
| 触动器类型： | 按片，滚轴 |
| 安装类型： | 底座安装 |
| 端接类型： | 螺丝端子 |
| 操作力： | 170gf |
AM1
4. Oil tight types
mm General tolerance: ± 0.4
The pushbutton part is sealed with the rubber cap and the connected part between the cap and body is also coated with resin so that
these parts are kept away from foreign matters. This type has resistance to oil.
Rigid lever
CAD Data
Operating force,
max.
0.69 N
Plunger seal
26.1
R63.5
Lever: Stainless steel
4.8
Release force,
min.
Pretravel,
max. mm
0.14 N
10
AM1511F (Solder terminal)
20.1 ± 0.5
O.P .
F.P.
Movement differential,
max. mm
Overtravel,
min. mm
Operating position,
mm
1.5
5.6
19.1 ± 0.7
AM1711F (Screw terminal)
Rigid short roller lever
CAD Data
Plunger seal
26.1
Roller 9.5 dia. × 4:
Plastic
Operating force,
max.
Release force,
min.
1.67 N
0.42 N
R26.7
Pretravel, max.
mm
4.5
20.1 ± 0.5
16.9 ± 0.8
O.P .
F.P.
Movement differential,
max. mm
0.7
Overtravel,
min. mm
2.4
AM1514F (Solder terminal)
AM1714F (Screw terminal)
Rigid roller lever
CAD Data
Operating position,
mm
30.2 ± 0.4
Plunger seal
26.1
R48.3
Roller 9.5 dia. × 4:
Plastic
Operating force,
max.
Release force,
min.
0.98 N
0.20 N
Pretravel,
max. mm
7.5
20.1 ± 0.5
16.9 ± 0.8
O.P .
F.P.
Movement differential,
max. mm
1.3
Overtravel,
min. mm
3.6
AM1513F (Solder terminal)
AM1713F (Screw terminal)
NOTES
Operating position,
mm
30.2 ± 0.7
1. Regarding fastening of switch body
1) In fastening the switch body, use M4
mounting screws to attach switches with
the torque 1.5 N·m or less.
2) After mounting and wiring, the
insulation distance between ground and
each terminal should be con?rmed as
suf?cient.
2. Adjustment of the operating device
The operating device should be
positioned so that it applies no stress to
the pushbutton or actuator when the
switch is in the open position. If this
condition is exceeded, the mechanical
and electrical performance will be
impaired. In addition, the force applied by
the operating device should be in a
perpendicular direction. Even if the
pushbutton is used in the full total travel
position, there will be no in?uence on the
life of the switch.
3. Soldering operations
Soldering should be done in less than 5
seconds, with a 60 watt iron (tip
temperature = 350°C max.). Care should
be taken not to apply force to the terminal
during soldering.
4. Avoid using switches in the
following conditions:
? In corrosive gases such as hydrogen
sul?de.
? In ?ammable or explosive gases such
as gasoline or thinner etc.
? In a dusty environment.
? In an ambient humidity over 85%.
? In conditions where the perpendicular
operating speed is less than 0.1 mm/sec.
or more than 1,000 mm/sec.
? In a silicon atmosphere.
5. Others
Caution should be taken not to drop
switches.
AECTB8E 201201-T
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
相关PDF资料 |
PDF描述 |
|---|---|
| A057 | SET NEEDLE BACK PROBE ADAPTER |
| DP-241-6-120 | XFRMR PWR 115/230V 120VCT 30VA |
| 241-6-10L | XFRMR PWR 115V 10VCT 3A LEADS |
| DP-241-6-36 | XFRMR PWR 115/230V 36VCT .85A |
| XC09-009PKI-RA | MODEM RF 900MHZ RS232/485 W/ACC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AM1743KF | 功能描述:基本/快动开关 AM1(NZ) Basic Switch RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
| AM1744K | 功能描述:基本/快动开关 Roller LVR Short, Screw RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
| AM1744KF | 制造商:Panasonic Electric Works 功能描述:Switch,short roller lever,1 way,screw tm |
| AM175 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC |
| AM-175-PIN | 功能描述:射频放大器 5-1000MHz NF:4.2dB VSWR 2.0:1 RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。