参数资料
型号: AM50065A33
元件分类: 开关
英文描述: SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 0.1A, 30VDC, 2.5mm, PANEL MOUNT
封装: ROHS COMPLIANT
文件页数: 4/13页
文件大小: 223K
代理商: AM50065A33
AM5
NOTES
1. Fastening of the switch body
1) Use at lister head M3 screws to
mount switches with less than a 0.49
Nm torque. Use of screws washers or
adhesive lock is recommended to
prevent loosening of the screws.
2) Check insulation distance between
ground and each terminal.
3) When the operation object is in the
free position, force should not be applied
directly to the actuator or pin plunger.
Also force should be applied to the pin
plunger from vertical direction to the
switch.
4) The standard value of overtravel
should be the range of 70% to 100% of
the rated O.T. value.
2. Soldering operations
Soldering should be accomplished in
less than 5 seconds, with a 60 watt iron.
Care should be taken not to apply force
to the terminal during soldering.
3. Varience of operating
characteristics
When specifying the switch, allow +20%
to the listed operating and release
forces.
4. Environment
Avoid using the switches in the following
conditions;
In corrosive gases, such as silicon gas
In a dusty environment
5. For switching of inductive loads
(relays, solenoids, etc.)
1) In order to prevent damage to
contacts due to the occurrence of arcing,
an arc absorbing circuit should be
applied.
2) Care should be taken that occurrence
in AC load possibly shorten the expected
life.
6. Please assure the quality and
reliability of the switch under the
actual service condition.
7. It is recommended to use Gold clad
contact type in use of low-level circuit
rating.
8. Cover and body are press-tted.
Once it is taken apart, it may cause
change of characteristics.
9. Cover and body are press-tted.
Once it is taken apart, it may cause
change of characteristics.
USE OF CONNECTOR
The .187 Quick-connect terminal and
.250 Quick-connect terminal accept the
all kinds of 1 polarity connectors and the
“Positive Lock” connectors
Please contact the manufacturers
directly.
receptacle terminal
.250 series
.187 series
“Positive Lock” connector. (equipped
with the lock construction of low
insertion type)
.187 type
(1 polarity)
.250 type
(1 polarity)
.187 type
(2 polarities)
.187 type
(3 polarities)
All Rights Reserved C
OPYRIGHT Panasonic Electric Works Co., Ltd.
相关PDF资料
PDF描述
AM51111A43N SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 11A, 125VDC, 2.5mm, PANEL MOUNT
AM51142A43N SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 11A, 125VDC, 4.6mm, PANEL MOUNT
A103S1MNMCB ROTARY SWITCH-3POSITIONS, SP3T, LATCHED, 0.02A, 20VDC, THROUGH HOLE-STRAIGHT
A10942RNMCGF ROTARY SWITCH-9POSITIONS, SP9T, LATCHED, 0.35A, 125VDC, THROUGH HOLE-STRAIGHT
A103S1RSMCBK ROTARY SWITCH-3POSITIONS, SP3T, LATCHED, 0.02A, 20VDC, THROUGH HOLE-STRAIGHT
相关代理商/技术参数
参数描述
AM50065A33-A 功能描述:基本/快动开关 SPST - NO, 0.1A Roller Levr Short QC RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel
AM50065A43-A 功能描述:基本/快动开关 SPST - NO, 0.1A Roller Levr Short QC RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel
AM50065A53-A 功能描述:基本/快动开关 SPST - NO, 0.1A Roller Levr Short QC RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel
AM50065C33-A 功能描述:基本/快动开关 SPST - NO, 0.1A Roller Levr Short QC RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel
AM50065C3L3 功能描述:基本/快动开关 SPST - NO, 0.1A Roller Levr Short QC RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel