参数资料
型号: AM52130D63-A
厂商: Panasonic Electric Works
文件页数: 12/13页
文件大小: 0K
描述: SWITCH MINI 21A SPST PLNGR.250QC
标准包装: 100
系列: AM5
电路: SPST-NO
开关功能: 关-瞬时
触点额定电压: 21A @ 250VAC
触动器类型: 圆形(针状冲杆)
安装类型: 底座安装
端接类型: 快速连接 - 0.250"(6.3mm)
操作力: 300gf

AM5
NOTES
USE OF CONNECTOR
1. Fastening of the switch body
1) Use ?at ?lister head M3 screws to
mount switches with less than a 0.49
N·m torque. Use of screws washers or
adhesive lock is recommended to
prevent loosening of the screws.
2) Check insulation distance between
ground and each terminal.
3) When the operation object is in the
free position, force should not be applied
directly to the actuator or pin plunger.
Also force should be applied to the pin
plunger from vertical direction to the
switch.
4) The standard value of overtravel
4. Environment
Avoid using the switches in the following
conditions;
? In corrosive gases, such as silicon gas
? In a dusty environment
5. For switching of inductive loads
(relays, solenoids, etc.)
1) In order to prevent damage to
contacts due to the occurrence of arcing,
an arc absorbing circuit should be
applied.
2) Care should be taken that occurrence
in AC load possibly shorten the expected
life.
6. Please assure the quality and
The .187 Quick-connect terminal and
.250 Quick-connect terminal accept the
all kinds of 1 polarity connectors and the
“Positive Lock” connectors
Please contact the manufacturers
directly.
? receptacle terminal
.250 series .187 series
? “Positive Lock” connector. (equipped
with the lock construction of low
insertion type)
should be the range of 70% to 100% of
the rated O.T. value.
2. Soldering operations
Manual soldering should be
accomplished within 5 seconds, with
max. 350 ° C iron. Care should be taken
not to apply force to the terminal during
soldering.
Terminal portions must not be moved in
min.1 minute after soldering.
Also no tensile strength of lead wires
reliability of the switch under the
actual service condition.
7. It is recommended to use Gold clad
contact type in use of low-level circuit
rating.
8. Cover and body are press-?tted.
Once it is taken apart, it may cause
change of characteristics.
9. Cover and body are press-?tted.
Once it is taken apart, it may cause
change of characteristics.
.187 type
(1 polarity)
.250 type
(1 polarity)
.187 type
(2 polarities)
.187 type
(3 polarities)
should be applied to terminals.
3. Varience of operating
characteristics
When specifying the switch, allow +20%
to the listed operating and release
forces.
AECTB9E 201201-T
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
相关PDF资料
PDF描述
AMC36DRMH CONN EDGECARD 72POS WW LP BELLOW
AMC65DTEF CONN EDGECARD 130POS .100 EYELET
AML21FBA2AD SWITCH PUSHBUTTON DPDT 3A 125V
AML24GBA2CA04 SWITCH ROCKER DP3T 3A 125V
AML25GBF2CA04GR SWITH PADDLE DPDT 3A
相关代理商/技术参数
参数描述
AM5230L 制造商:Mitsubishi Electric 功能描述:5230L
AM-530 功能描述:数字万用表 TRMS Multimeter Electrical Contactor RoHS:否 制造商:Tektronix 产品:Multimeters 类型:Bench 准确性:0.04 % 电压范围:2 V to 2 kV 电阻范围: 电容范围: 显示计数: 频率:10 Hz to 45 Hz, 850 Hz to 1 MHz 测距: 真均方根值: 数据保持:
AM-5302CAR 功能描述:SENSOR AMORPHOUS 117.8X31.2X1.8 RoHS:否 类别:传感器,转换器 >> 太阳能电池 系列:Amorton 标准包装:1 系列:* 类型:* 输出电压:* 工作温度:* 电流短路 (Isc):* 封装/外壳:-
AM-5308 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:Amorphous Solar Cell
AM-5308CAR 制造商:Panasonic Industrial Company 功能描述:Amorphos.Si Solar cell,Outer,1.7V-68.8mA