- 您现在的位置：买卖IC网 > PDF目录92918 > AM55-0015 2400 MHz - 2500 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER PDF资料下载
参数资料
| 型号： | AM55-0015 |
| 元件分类： | 放大器 |
| 英文描述： | 2400 MHz - 2500 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| 封装： | PLASTIC, QSOP-28 |
| 文件页数： | 8/8页 |
| 文件大小： | 177K |
| 代理商： | AM55-0015 |
n North America: Tel. (800) 366-2266, Fax (800) 618-8883
n Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298
n Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
Specifications subject to change without notice.
Visit www.macom.com for additional data sheets and product information.
V 2.0
8
250 mW Power Amplifier with T/R Switch, 2.4 - 2.5 GHz
AM55-0015
PCB DC Connector Jumper Settings
GND
AM55-0015
5V TR
TR CTRL
VD3
VD2
VGG
VD1
RF
IN
RF
OUT
RX
OUT
#1
#20
1
#2
#19
AV10072
REV.
D
R
T
VG1
VG2
(Position 1)
(Position 2)
Jumper
Jumper (T/R Switch Control)
Position 1 = Transmit Mode
Position 2 = Receive Mode
AM55-0015SMB Biasing Procedure
In order to prevent transients which may damage the MMIC, please
adhere to the following procedure.
Turn on all power supplies and set all voltages to 0 volts BEFORE
connecting the power supplies to the DC connector.
Set Jumper for desired mode.
Apply a -10.0 volt supply to DC connector pin 12 (V
GG).
Apply a +5.0 volt supply to the DC connector pin 11 (V
DD1).
Apply a +5.0 volt supply to the DC connector pin 14 (V
DD2).
Apply a +5.0 volt supply to the DC connector pin 16 (V
DD3).
Apply a +5.0 volt supply to the DC connector pin 20 (V
DD TR,).
Adjust V
GG supply to -10 volts.
Adjust all V
DD supplies to +5 volts.
Adjust V
GG supply for required VDD1,2,3 quiescent current (180
mA total current).
To power off, reverse above procedure.
1) Set all VDD supplies to 0 volts.
Evaluation PCB + RF Connector Losses
Port Reference
Approximate RF Loss
RF IN
0.25 dB
RF OUT
0.25 dB
RX OUT
0.25 dB
The DC connector on the Designer’s Kit PCB allows conven-
ient DC line access. This is accomplished by one or more of
the following methods:
1. A mating female multi-pin connector (Newark Electronics
Stock # 46F-4658, not included).
2. Wires soldered to the necessary pins (not included).
3. Clip leads (not included).
4. A combination of clip leads or wires and jumpers (jumpers
included as required).
相关PDF资料 |
PDF描述 |
|---|---|
| AM55-0023RTR | 800 MHz - 2000 MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER |
| AM55-0023TR | 800 MHz - 2000 MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER |
| AM55-0023 | 800 MHz - 2000 MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER |
| AM55-0027TR | 1940 MHz - 2340 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER |
| AM55-0027 | 1940 MHz - 2340 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AM55-0016 | 制造商:MA-COM 制造商全称:M/A-COM Technology Solutions, Inc. 功能描述:Switched Low Noise Amplifier 800 - 1000 MHz |
| AM55-0016_1 | 制造商:MA-COM 制造商全称:M/A-COM Technology Solutions, Inc. 功能描述:Switched Low Noise Amplifier 800 - 1000 MHz |
| AM55-0016RTR | 制造商:MA-COM 制造商全称:M/A-COM Technology Solutions, Inc. 功能描述:Switched Low Noise Amplifier 800 - 1000 MHz |
| AM55-0016SMB | 制造商:MA-COM 制造商全称:M/A-COM Technology Solutions, Inc. 功能描述:Switched Low Noise Amplifier 800 - 1000 MHz |
| AM55-0016TR | 制造商:M/A-COM Technology Solutions 功能描述:RF AMP CHIP SGL GP 1GHZ 5V 8MSOP - Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。