1
IDTAMB0480
ADVANCED MEMORY BUFFER FOR FULLY BUFFERED DIMM
COMMERCIAL TEMPERATURE RANGE
APRIL 2006
2006 Integrated Device Technology, Inc.
DSC - 7042/2
c
COMME RCIAL T E MPE RAT URE RANGE
FEATURES:
Advanced Memory Buffer for Fully buffered DIMMs
3.2 and 4 Gbit/s serial speeds (DDR2-533 and 667 DRAM)
Support for up to eight DIMMs per channel
Repeater Mode for extending FB-DIMMlinks
Northbound and Southbound single lane fail over and channel
error detection
Voltage and Timing margin high-speed I/O test capability
Fully Supports the FB-DIMMconfiguration register set
Test features supported include:
- Integrated thermal sensor and status indicator
- Supports MEMBIST, IBIST and Virtual Host mode
- Transparent mode and direct access mode for DRAMtesting
Complies with JEDEC Architecture and Protocol Specification
Available in 655 ball FCBGA package
EX PANDED FEATURES:
Wide range DDR Timing Control
Superfine adjustment for DDR timing
Wide range of DDR slew rate control
Slew rate controllable independent of output impedance
High speed SMBus in test mode
IBIST IDT PRBS Generator
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
DESCRIPTION:
The fully buffered dual in-line memory module (FB-DIMM) is the next
generation memory architecture to meet the growing memory requirement of
servers and workstations. The IDT Advanced Memory Buffer (AMB) chip is the
essential building block located on each FB-DIMM. The IDT AMB receives
commands and data fromthe host controller to control and write/read data to/
fromthe DRAMs on the DIMM Commands and write data are sent southbound
fromthe host controller to AMBs in a daisy chain fashion and interpreted by the
target AMB. Status and read data are sent northbound fromAMBs to the host
controller also in a daisy chain fashion, passing through non-target AMBs. This
unique channel structure alleviates buffer loading issues common in registered
DIMMtechnology, enabling designers to use a large number of DIMMs within
a single system
IDTAMB0480 complies with the latest JEDEC defined FB-DIMMArchitecture
and Protocol Specification and supports DDR2-533 and DDR2-667 DRAM.
It also enables serial data transfer at 3.2 and 4.0Gbps. The IDTAMB0480
supports servers, workstations, storage devices and communication applications
that support the next generation FB-DIMMarchitecture.
IDTAMB0480
PRODUCT
BRIEF
ADVANCED MEMORY BUFFER
FOR FULLY BUFFERED DIMM
MODULES
Host
Memory
Controller
DDR2
DDR2
DDR2
DDR2
DDR2
DDR2
DDR2
DDR2
14
10
Up to 8 modules
DDR2
DDR2
DDR2
DDR2
IDT
AMB
DDR2
DDR2
DDR2
DDR2
DDR2
DDR2
DDR2
DDR2
DDR2
DDR2
DDR2
DDR2
DDR2
DDR2
DDR2
DDR2
DDR2
DDR2
DDR2
DDR2
IDT
AMB
IDT
AMB
IDT
AMB
FDB MEMORY CHANNEL