- 您现在的位置：买卖IC网 > PDF目录255361 > AMB310219 MOTION SENSOR, XSS PDF资料下载
参数资料
| 型号： | AMB310219 |
| 元件分类： | 模拟信号调理 |
| 英文描述： | MOTION SENSOR, XSS |
| 文件页数： | 8/8页 |
| 文件大小： | 284K |
| 代理商： | AMB310219 |
26
MA Motion Sensor (AMB)
(Notes) Purchase the follwing connections:
1. Socket housing IL-Z-4S-S125C3(Japan Aviation Electronic Industry, Ltd.)
2. Lead wire (with metal connector at one end)
WIRING DIAGRAM (Connector surface view)
1) Short type (H)
(10 cm 3.937 inch)
2) Middle type (H)
(80 cm 31.496 inch)
3) Long type (H)
(200 cm 78.740 inch)
4) Long type (V)
(200 cm 78.740 inch)
mm inch
OPTIONAL
1. Connector with cable
AMB9001
1. Output (Black)
2. GND (Blue)
3. Power source (Brown)
4. Built-in oscillation circuit type: N.C.
External triggering type: start signal input (Purple)
The edge is soldered
4.5
±1
.177
±.039
150
±5
5.906
±.197
4.3
.169
Socket housing IL-Z-4S-S125C3
Lead wires AWG 28
(Japan Aviation Electronics Industry, Limited)
6.45
.254
Note: Mistaken cable assembly can cause
damage to the internal circuits, so
please check the power cord before
switching ON. (Particular care must
be taken as to avoid reverse connec-
tion of the power.)
1
2
3
4
IL-Z-4P-S125L3-E
(Japan Aviation Electronics
Industry, Limited)
1: Output
2: GND
3: Power source
4. Built-in oscillation
circuit type: N.C.
External triggering
type: start signal input
1
2
3
4
IL-Z-4P-S125T3-E
(Japan Aviation Electronics
Industry, Limited)
1: Output
2: GND
3: Power source
4. Built-in oscillation
circuit type: N.C.
External triggering
type: start signal input
IL-Z-4P-S125T3-E
(Japan Aviation Electronics
Industry, Limited)
1
2
3
4
1: Output
2: GND
3: Power source
4. Built-in oscillation
circuit type: N.C.
External triggering
type: start signal input
1
2
3
4
IL-Z-4P-S125T3-E
(Japan Aviation Electronics
Industry, Limited)
1: Output
2: GND
3: Power source
4. Built-in oscillation
circuit type: N.C.
External triggering
type: start signal input
3) Long type (H) (200 cm 78.74 inch)
Long type (V) (200 cm 78.74 inch)
mm inch
10
.394
33
1.299
4.2 dia.
.165 dia.
24.7
.972
46
1.811
20
.787
43
1.693
Receiver
Projector
7
.276
29.7
1.169 Max. 1
.039
Connector surface
(Front lens surface)
Optical surface
MAX. 1
.039
29.7
1.169
7
.276
Optical
surface
Connector
surface
10
.394
20
.787
Receiver
Projector
46
1.811
55
2.165
65
2.559
4.2 dia.
.165 dia.
Pass directions
Object
→ stands for pass direction of the target object.
NOTES
1. Environment
1) Avoid using the sensor in environ-
ments containing excessive amounts of
steam, dust, corrosive gas, or where
organic solvents are present.
2) When the sensor is used in noisy envi-
ronments, connect a capacitor (minimum
33 F) across its power input terminals.
2. Wiring
1) Check all wiring before applying
power. Incorrect wiring may damage the
internal circuit (in particular, check that
the connection to the power supply is not
reversed.)
2) Avoid excessive removing and replac-
ing of the connector.
3. Detector surface (Optical surface)
1) Keep the detector surface clean.
Excessive dust or dirt on the detector
surface will deteriorate the sensing per-
formance.
2) Do not allow condensation or freezing
to occur on the surface of the sensor. If
condensation or freezing does occur at
low temperatures, the sensor may not
detect objects correctly.
3) This product is designed to detect the
existence of human body. The sensor
will not detect objects consisting of a low
reflective material (e.g., an object coated
with black rubber, etc.) or of a highly
reflective material (e.g., mirror, glass,
coated paper, etc.)
4) The front surface of the lens and case
are made of polycarbonate resin and can
withstand water, alcohol, oils, salts and
weak acids. Other fluids such as alka-
lines, aromatic hydrocarbons and halo-
genated hydrocarbons may melt or swell
the lens and case, please do not have
such fluids touch the lens and case.
5) If you use the sensor with a cover or
filter connected to the front of the sensor,
the sensor may detect the cover itself,
the detection distance can change, and
unstable operation can result.
6) When using multiple sensors in paral-
lel, leave a space of at least 5 cm 1.969
inch between adjacent sensors, and con-
firm that they do not interfere with each
other before use.
7) To protect the inner circuit, wiring
should be max. 3 m 9.843 ft..
4. Recommended installation proce-
dure
Install the photoelectric sensor so that it
is orientated correctly in relation to the
pass directions of the target objects as
shown in the figure below.
For the general precautions, refer to the
Notes for Motion Sensors on next page.
MA MOTION SENSOR
2004.11.8 10:20 AM
Page 26
相关PDF资料 |
PDF描述 |
|---|---|
| ADM6319C50ARJ-RL7 | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO5 |
| ADM6319D27ARJ-RL7 | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO5 |
| ATW2815D-MSTRPBF | 2-OUTPUT 30 W DC-DC REG PWR SUPPLY MODULE |
| AM1601-7PD6AF | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
| AM1601-7RD3AH | 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AMB310908 | 功能描述:工业移动感应器和位置传感器 SENSOR REFL LONG H-TYPE RoHS:否 制造商:Honeywell 输出类型:Analog - Current 电压额定值:12 VDC to 30 VDC 线性:+/- 0.0011 % 温度范围:- 40 C to + 85 C 总电阻: 容差: 类型:Rotary Sensor |
| AMB3159 | 功能描述:工业移动感应器和位置传感器 AMB Motion Sensor (V type, 5V DC, 200cm) RoHS:否 制造商:Honeywell 输出类型:Analog - Current 电压额定值:12 VDC to 30 VDC 线性:+/- 0.0011 % 温度范围:- 40 C to + 85 C 总电阻: 容差: 类型:Rotary Sensor |
| AMB315912 | 制造商:Panasonic Electric Works 功能描述: |
| AMB315914 | 功能描述:工业移动感应器和位置传感器 4.5 - 6.5V DC 55.118 Long Type RoHS:否 制造商:Honeywell 输出类型:Analog - Current 电压额定值:12 VDC to 30 VDC 线性:+/- 0.0011 % 温度范围:- 40 C to + 85 C 总电阻: 容差: 类型:Rotary Sensor |
| AMB315915 | 功能描述:工业移动感应器和位置传感器 4.5 - 6.5V DC 59.055 Long Type RoHS:否 制造商:Honeywell 输出类型:Analog - Current 电压额定值:12 VDC to 30 VDC 线性:+/- 0.0011 % 温度范围:- 40 C to + 85 C 总电阻: 容差: 类型:Rotary Sensor |
发布紧急采购，3分钟左右您将得到回复。