- 您现在的位置：买卖IC网 > PDF目录378402 > AME8861AEEV300L (AME, Inc.) 600mA CMOS LDO PDF资料下载
参数资料
| 型号： | AME8861AEEV300L |
| 厂商： | AME, Inc. |
| 元件分类： | 基准电压源/电流源 |
| 英文描述： | 600mA CMOS LDO |
| 中文描述： | 600毫安的CMOS LDO稳压器 |
| 文件页数： | 5/9页 |
| 文件大小： | 148K |
| 代理商： | AME8861AEEV300L |
AME, Inc.
5
AME8861
600mA CMOS LDO
The AME8861 family of CMOS regulators contain a
PMOS pass transistor, voltage reference, error amplifier,
over-current protection, and thermal shutdown.
The P-channel pass transistor receives data from the
error amplifier, over-current shutdown, and thermal pro-
tection circuits. During normal operation, the error ampli-
fier compares the output voltage to a precision reference.
Over-current and Thermal shutdown circuits become ac-
tive when the junction temperature exceeds 150
o
C, or
the current exceeds 600mA. During thermal shutdown,
the output voltage remains low. Normal operation is re-
stored when the junction temperature drops below 120
o
C.
The AME8861 switches from voltage mode to current
mode when the load exceeds the rated output current.
This prevents over-stress. The AME8861 also incorpo-
rates current foldback to reduce power dissipation when
the output is short circuited. This feature becomes ac-
tive when the output drops below 0.8 volts, and reduces
the current flow by 65%. Full current is restored when
the voltage exceeds 0.8 volts.
n
Detailed Description
n
External Capacitors
The AME8861 is stable with an output capacitor to
ground of 2.2
μ
F or greater. Ceramic capacitors have the
lowest ESR, and will offer the best AC performance. Con-
versely, Aluminum Electrolytic capacitors exhibit the high-
est ESR, resulting in the poorest AC response. Unfortu-
nately, large value ceramic capacitors are comparatively
expensive. One option is to parallel a 0.1
μ
F ceramic
capacitor with a 10
μ
F Aluminum Electrolytic. The benefit
is low ESR, high capacitance, and low overall cost.
A second capacitor is recommended between the in-
put and ground to stabilize Vin. The input capacitor should
be at least 0.1
μ
F to have a beneficial effect.
A third capacitor can be connected between the BY-
PASS pin and GND. This capacitor can be a low cost
Polyester Film variety between the value of 0.001 ~
0.01
μ
F. A larger capacitor improves the AC ripple rejec-
tion, but also makes the output come up slowly. This
"Soft" turn-on is desirable in some applications to limit
turn-on surges.
All capacitors should be placed in close proximity to
the pins. A "Quiet" ground termination is desirable. This
can be achieved with a "Star" connection.
n
Enable
The Enable pin normally floats high. When actively,
pulled low, the PMOS pass transistor shuts off, and all
internal circuits are powered down. In this state, the qui-
escent current is less than 1
μ
A. This pin behaves much
like an electronic switch.
相关PDF资料 |
PDF描述 |
|---|---|
| AME8861AEEV300Y | 600mA CMOS LDO |
| AME8861AEEV300Z | 600mA CMOS LDO |
| AME8890 | 150mA CMOS LDO |
| AME8890TEEV | 150mA CMOS LDO |
| AME9001 | CCFL BACKLIGHT CONTROLLER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AME9001 | 制造商:AME 制造商全称:Analog Microelectronics 功能描述:CCFL BACKLIGHT CONTROLLER |
| AME9001AETH | 制造商:AME 制造商全称:Analog Microelectronics 功能描述:CCFL BACKLIGHT CONTROLLER |
| AME9002 | 制造商:AKM 制造商全称:AKM 功能描述:CCFL Backlight Controller |
| AME9002AEJH | 制造商:AKM 制造商全称:AKM 功能描述:CCFL Backlight Controller |
| AME9002AEPH | 制造商:AKM 制造商全称:AKM 功能描述:CCFL Backlight Controller |
发布紧急采购，3分钟左右您将得到回复。