- 您现在的位置：买卖IC网 > PDF目录378403 > AN2126SC (CYPRESS SEMICONDUCTOR CORP) USB Controller(USB控制器) PDF资料下载
参数资料
| 型号： | AN2126SC |
| 厂商： | CYPRESS SEMICONDUCTOR CORP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | USB Controller(USB控制器) |
| 中文描述： | 8-BIT, 24 MHz, MICROCONTROLLER, PQFP44 |
| 封装： | PLASTIC, QFP-44 |
| 文件页数： | 11/16页 |
| 文件大小： | 491K |
| 代理商： | AN2126SC |
EZ-USB Series 2100
More Endpoint Buffer
Memory
The EZ-USB chip supports more
endpoints and provides more
endpoint buffer memory than any
other USB-device solution in the
market. The USB specification
describes an endpoint as a source
or sink of data. In the EZ-USB
chip, endpoints are constructed
as RAM (bulk, control, interrupt
endpoints) or FIFOs (isochronous
endpoints). With support for 31
endpoints (the maximum in the
USB specification), it gives the
peripheral designer ultimate
flexibility. Unlike other USB
peripheral alternatives, the
EZ-USB architecture also sup-
ports the maximum packet size
for each endpoint. Thus 64-byte
packets are available for all
control, bulk, and interrupt
endpoints. Isochronous endpoints
are double buffered with a packet
size of up to 1024 bytes, the
maximum allowable under the
USB specification.
Control
The EZ-USB family supports one
control endpoint. To simplify
firmware programming, the
EZ-USB chip provides data from
control transfers in two separate
buffers. It also has a unique
capability to manage the three-
phase transfer in hardware,
relieving device firmware from
this task.
Bulk/Interrupt
Bulk endpoints are used when
data integrity must be guaran-
teed, but without critical delivery
time. The EZ-USB family provides
14 bulk endpoints: seven IN and
seven OUT. These endpoints can
be programmed to be double-
buffered, which improves trans-
fer bandwidth in some applica-
tions. Bulk data is accessible as
RAM or FIFO data. The IN and
OUT endpoints can also be used
as interrupt endpoints.
Isochronous
These endpoints support stream-
ing data such as audio or video.
The EZ-USB family supports 16
isochronous endpoints: eight IN
and eight OUT. A pool of FIFOs
can be allocated among the
endpoint to a maximum of
1 Kbyte. Isochronous endpoints
are double-buffered, as required
by the USB specification, so the
actual size of iscochronous buffer
memory is 2 Kbytes.
Low Pow er—Even for
Bus-Pow ered Devices
The EZ-USB family meets the
tough power specifications of
USB. Running off of a 3.3V power
supply, it can accommodate bus-
powered devices and self-pow-
ered peripherals. In addition,
with a 50 mA current draw under
full operating conditions, the
EZ-USB family provides current
headroom for peripheral func-
tions. This meets the USB require-
ment of 100 mA maximum
current for attached peripherals
prior to configuration. Total
maximum power required by an
EZ-USB chip under active condi-
tions is 170 mW. Other solutions
require five times more power.
Thirty-one
Endpoints
for Ultimate
Flex ibility
相关PDF资料 |
PDF描述 |
|---|---|
| AN2131QC | USB Controller(通用串行总线（USB）控制器) |
| AN2131SC | USB Controller(USB控制器) |
| AN2135SC | USB Controller(通用串行总线（USB）控制器) |
| AN2136SC | USB Controller(通用串行总线（USB）控制器) |
| AN2331QC | USB Controller(通用串行总线（USB）控制器) |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AN2126T | 制造商:未知厂家 制造商全称:未知厂家 功能描述:(1.49 M) |
| AN2130 | 制造商:PANASONIC 制造商全称:Panasonic Semiconductor 功能描述:Video Camera Gamma Correction and AGC Circuits |
| AN2131 | 制造商:PANASONIC 制造商全称:Panasonic Semiconductor 功能描述:Video Camera Gamma Correction and AGC Circuits |
| AN2131-DK001 | 功能描述:KIT EZ-USB DEVELOPMENT BOARD RoHS:否 类别:编程器，开发系统 >> 过时/停产零件编号 系列:- 标准包装:1 系列:- 类型:MCU 适用于相关产品:Freescale MC68HC908LJ/LK（80-QFP ZIF 插口） 所含物品:面板、缆线、软件、数据表和用户手册 其它名称:520-1035 |
| AN2131Q | 制造商:未知厂家 制造商全称:未知厂家 功能描述:(1.49 M) |
发布紧急采购，3分钟左右您将得到回复。