- 您现在的位置：买卖IC网 > Datasheet目录310 > AOZ1083CI (Alpha & Omega Semiconductor Inc)IC LED DRVR BUCK CC 1.2A SOT23-6 Datasheet资料下载
参数资料
| 型号： | AOZ1083CI |
| 厂商： | Alpha & Omega Semiconductor Inc |
| 文件页数： | 7/12页 |
| 文件大小： | 0K |
| 描述： | IC LED DRVR BUCK CC 1.2A SOT23-6 |
| 标准包装： | 3,000 |
| 系列： | * |
AOZ1083
Application Information
Δ V IN = ----------------- × ? ? × ---------
I CIN_RMS = I O × --------- ? 1 – --------- ?
V O
Δ I L = ----------- × ? 1 – --------- ?
V O
I Lpeak = I O + -------- L
The basic AOZ1083 application circuit is shown in
Figure 1. Component selection is explained below.
Input Capacitor
The input capacitor must be connected to the VIN pin
and PGND pin of the AOZ1083 to maintain steady input
voltage and filter out the pulsing input current. The
voltage rating of the input capacitor must be greater than
the maximum input voltage plus ripple voltage.
The input ripple voltage can be approximated by
equation below::
I O ? V O ? V O
1 – ---------
f × C IN ? V IN ? V IN
Since the input current is discontinuous in a buck
converter, the current stress on the input capacitor is
another concern when selecting the capacitor. For a buck
circuit, the RMS value of the input capacitor current can
be calculated by:
V O ? V O ?
V IN ? V IN ?
if we let m equal the conversion ratio:
--------- = m
V IN
The relationship between the input capacitor RMS
current and voltage conversion ratio is calculated and
shown in Figure 2. It can be seen that when V O is half of
V IN , C IN is under the worst current stress. The worst
current stress on C IN is at 0.5 x I O .
0.5
0.4
I CIN_RMS (m ) 0.3
For reliable operation and best performance, the input
capacitors must have current rating higher than I CIN_RMS
at the worst operating conditions. Ceramic capacitors are
preferred for input capacitors because of their low ESR
and high ripple current rating. Depending on the
application circuits, other low ESR tantalum capacitor or
aluminum electrolytic capacitor may also be used. When
selecting ceramic capacitors, X5R or X7R type dielectric
ceramic capacitors are preferred for their better
temperature and voltage characteristics. Note that the
ripple current rating from capacitor manufacturers are
based on a certain life time. Further de-rating may need
to be considered for long term reliability.
Inductor
The inductor is used to supply constant current to output
when it is driven by a switching voltage. For a given input
and output voltage, inductance and switching frequency
together decide the inductor ripple current, which is:
V O ? ?
f × L ? V ?
IN
The peak inductor current is:
Δ I
2
High inductance provides low inductor ripple current but
requires a larger size inductor to avoid saturation. Low
ripple current reduces inductor core losses. It also
reduces RMS current through inductor and switches,
which results in less conduction loss.
When selecting the inductor, confirm it is able to handle
the peak current without saturation even at the highest
operating temperature.
The inductor takes the highest current in a buck circuit.
The conduction loss on inductor needs to be checked for
thermal and efficiency requirements.
I O
0.2
0.1
Surface mount inductors in different shape and styles are
available from Coilcraft, Elytone and Murata. Shielded
inductors are small and radiate less EMI noise but cost
more than unshielded inductors. The choice depends on
0
0
0.5
m
1
EMI requirement, price and size.
Output Capacitor
Figure 2. I CIN vs. Voltage Conversion Ratio
The output capacitor is selected based on the DC output
voltage rating, output ripple voltage specification and
ripple current rating.
Rev. 1.0 July 2011
www.aosmd.com
Page 7 of 12
相关PDF资料 |
PDF描述 |
|---|---|
| AOZ1935QI | IC LED DRVR WHITE BCKLGT 16QFN |
| AOZ1977AI | IC LED DRVR BCKLGT 16SOIC |
| AP-104-NT | 12V PLUG TRANSFORMER EMPTY CASE |
| AP-120 | PLUG AUTO LOCKING BLACK |
| AP-121 | PLUG AUTO LOCKING BLACK W/LED |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AOZ1084DI | 制造商:Alpha & Omega Semiconductor 功能描述:IC LED DRVR BUCK CC 1.2A 8DFN |
| AOZ1092DI | 功能描述:IC REG BUCK ADJ 3A 8DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:EZBuck™ 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 类型:升压（升压） 输出类型:两者兼有 输出数:1 输出电压:5V，2 V ~ 16.5 V 输入电压:2 V ~ 16.5 V PWM 型:- 频率 - 开关:45kHz 电流 - 输出:50mA 同步整流器:无 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:8-DIP（0.300"，7.62mm） 包装:管件 供应商设备封装:8-PDIP |
| AOZ1094AI | 功能描述:IC REG BUCK ADJ 5A SO-8 RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:EZBuck™ 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 类型:升压（升压） 输出类型:两者兼有 输出数:1 输出电压:5V，2 V ~ 16.5 V 输入电压:2 V ~ 16.5 V PWM 型:- 频率 - 开关:45kHz 电流 - 输出:50mA 同步整流器:无 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:8-DIP（0.300"，7.62mm） 包装:管件 供应商设备封装:8-PDIP |
| AOZ1094AIL | 制造商:Alpha & Omega Semiconductor 功能描述: |
| AOZ1094AIL_2 | 功能描述:IC REG BUCK 8SOIC 制造商:alpha & omega semiconductor inc. 系列:EZBuck?? 包装:带卷（TR） 零件状态:停產 功能:降压 输出配置:正 拓扑:降压 输出类型:可调式 输出数:1 电压 - 输入（最小值）:4.5V 电压 - 输入（最大值）:16V 电压 - 输出（最小值/固定）:0.8V 电压 - 输出（最大值）:16V 电流 - 输出:5A 频率 - 开关:500kHz 同步整流器:无 工作温度:-40°C ~ 85°C（TA） 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商器件封装:8-SO 标准包装:3,000 |
发布紧急采购，3分钟左右您将得到回复。