- 您现在的位置：买卖IC网 > PDF目录13067 > AP1086K25L-U (Diodes Inc)IC REG LDO 2.5V 1.5A TO-263 PDF资料下载
参数资料
| 型号： | AP1086K25L-U |
| 厂商： | Diodes Inc |
| 文件页数： | 4/10页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO 2.5V 1.5A TO-263 |
| 产品变化通告： | End Of Life 10/June/2010 |
| 标准包装： | 50 |
| 稳压器拓扑结构： | 正，固定式 |
| 输出电压： | 2.5V |
| 输入电压： | 4.7 V ~ 12 V |
| 电压 - 压降（标准）： | 1.3V @ 1.5A |
| 稳压器数量： | 1 |
| 电流 - 输出： | 1.5A |
| 电流 - 限制（最小）： | 1.6A |
| 工作温度： | 0°C ~ 150°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | TO-263-3，D²Pak（2 引线+接片），TO-263AB |
| 供应商设备封装： | TO-263-3 |
| 包装： | 管件 |
AP1086
1.5A LOW DROPOUT POSITIVE ADJUSTABLE OR
FIXED-MODE REGULATOR
Functional Description
Introduction
The AP1086 adjustable or fixed-mode Low Dropout (LDO) regulator is a 3 terminal device which can easily be
programmed by internal mask change to any voltages within the range of 1.25V to V IN -1.4V. The AP1086 only
needs 1.4V differential between V IN and V OUT to maintain output regulation. In addition, the output voltage
tolerances are also extremely tight and they include the transient response as part of the specification. For
example, Intel VRE specification calls for a total of +/- 100mV including initial tolerance, load regulation and 0 to
1.5A load step.
The AP1086 is specifically designed to meet the fast current transient needs as well as providing an accurate
initial voltage, reducing the overall system cost with the need for fewer output capacitors.
Load Regulation
Since the AP1086 is only a 3 terminal device, it is not possible to provide true remote sensing of the output
voltage at the load. But it can supply good load regulation by internal feedback bypass the external loss such as
adjustable mode.
Stability
The AP1086 requires the use of an output capacitor as part of the frequency compensation in order to make the
regulator stable. For most applications a minimum of 10uF aluminum electrolytic capacitor insures both stability
and good transient response.
Thermal Design
The AP1086 incorporates an internal thermal shutdown that protects the device when the junction temperature
exceeds the maximum allowable junction temperature. Although this device can operate with junction
temperatures in the range of 150 o C, it is recommended that the selected heat sink be chosen such that during
maximum continuous load operation the junction temperature is kept below the temperature.
Layout Consideration
The output capacitors must be located as close to the V OUT terminal of the device as possible. It is recommended
to use a section of a layer of the PC board as a plane to connect the V OUT pin to the output capacitors to prevent
any high frequency oscillation that may result due to excessive trace inductance.
AP1086
Document number: DS31028 Rev. 6 - 2
4 of 10
June 2010
? Diodes Incorporated
相关PDF资料 |
PDF描述 |
|---|---|
| AP1086K25L-13 | IC REG LDO 2.5V 1.5A TO-263 |
| UWS0J471MCL1GS | CAP ALUM 470UF 6.3V 20% SMD |
| GSM24DTAH-S189 | CONN EDGECARD 48POS R/A .156 SLD |
| GBB35DHAD | CONN EDGECARD 70POS R/A .050 SLD |
| RBA50DRSD-S664 | CONN EDGECARD 100PS DIP .125 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AP1086K33 | 制造商:ANACHIP 制造商全称:Anachip Corp 功能描述:1.5A Low Dropout Positive Adjustable or Fixed-Mode Regulator |
| AP1086K33A | 功能描述:低压差稳压器 - LDO 3.3V 1.5A 1.3 DRPV RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| AP1086K33G-13 | 功能描述:低压差稳压器 - LDO 3-TERM ADJ OR FIXED 1.4V LDO 3.3V LOGIC RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| AP1086K33G-U | 制造商:DIODES 制造商全称:Diodes Incorporated 功能描述:1.5A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR |
| AP1086K33L | 制造商:ANACHIP 制造商全称:Anachip Corp 功能描述:1.5A Low Dropout Positive Adjustable or Fixed-Mode Regulator |
发布紧急采购，3分钟左右您将得到回复。