- 您现在的位置：买卖IC网 > PDF目录3527 > AP112-1R-36616-1 (Sensata Technologies/Airpax)FULLY SEALED MAGNETIC CIRCUIT PDF资料下载
参数资料
| 型号： | AP112-1R-36616-1 |
| 厂商： | Sensata Technologies/Airpax |
| 文件页数： | 9/12页 |
| 文件大小： | 0K |
| 描述： | FULLY SEALED MAGNETIC CIRCUIT |
| 标准包装： | 1 |
| 系列： | AP |
| 断路器类型： | 磁性（液力延迟） |
| 电压： | 50VDC，240VAC |
| 极数： | 3 |
| 触动器类型： | 拨动式开关 |
| 安装类型： | 面板安装 |
| 其它名称： | Q3360385 |
Trip Free
AP circuit protectors will trip open on overload, even
when forcibly held ON. This prevents the operator from
damaging the circuit by holding the handle in the ON
position.
Trip Indication
The operating handle of the breaker moves forcibly and
positively to the OFF position on overload. It is not
necessary to manually “reset” to full “OFF” in order to turn
it on again.
Ambient Operation
The protector will operate at any ambient between –40°
C and +100° C, when tested in accordance with the
requirements
of MIL-PRF-39019.
Insulation Resistance
Exceeds 100 megohms at a potential of 100Vdc.
Dielectric Strength
The protector will withstand 1250 volts RMS, 60Hz from
terminals to case and between the terminals when open.
Endurance
With the circuit protector operated as an ON-OFF switch,
operating life exceeds 10,000 operations at a rate of 6 per
minute when tested as follows: 6000 OPS @ rated current
plus 4000 OPS @ no load.
Ratings
AP protectors are available in current ratings from 50
milliamperes to 20 amperes, 50 volts DC or 240 volts AC,
maximum, 60 Hz or 400 Hz. UP protectors are UL 1077
and CSA approved as per the following table. Please
consult factory for ratings other than those noted.
RATINGS
Lever Strength
The operating lever or its seal will not be damaged by a 10 lb.
force applied in any direction.
Shock
All protectors withstand 100G without tripping, even while
carrying full rated current with shock applied in any plane
of 6 ms duration. Test is made according to Method 213, Test
Condition I or MIL-Std-202 as outlined in Paragraph 4.6.14 of
MIL-PRF-39019. Delay 40, 50 and 60 breakers are tested at 80%
of rated current.
Vibration
All protectors withstand vibration from 10 to 55 cycles at .06
double amplitude and 55 to 2000 cycles at 10G, applied in
any plane, without damage and without tripping even while
operating at full rated current. Test is made in accordance
with Method 204A, Test Condition C, of MIL-Std-202 as
outlined in Paragraph 4.6.12 of MIL-PRF-39019. Delay 40,
50 and 60 protectors are tested at 80% of rated current.
Short Circuit Capacity
When tested in accordance with the procedures of UL1077,
AP supplementary protectors have a short circuit capacity of
1000 amperes at 32Vdc, 120Vac, 240Vac, 60 or 400Hz. Parts
are recognized to UL1077 for type UP1 only. The rated Rupture
Capacity per MIL-PRF-39019 is 500 amperes, 50 volts DC, 500
amperes, 120 volts AC and 300 amperes, 240 volts AC, 60 or
400Hz.
Case Seal
The breaker is fully sealed and will not show evidence of
leakage under total immersion. Meets requirements of MIL-
PRF-39019.
Panel Seal
The “O” ring provides, with the other illustrated hardware, a
seal against a pressure differential of 15 psi applied for an hour.
Series
UP
UP
UP
UP
UP
Voltage
50 VDC
240 VAC
120 VAC
240 VAC (400)
120 VAC (400)
Current
0.05 to 20 amps
0.05 to 7.5 amps
0.05 to 15 amps
0.05 to 7.5 amps
0.05 to 15 amps
TC
1
1
1
1
1
OL
1
0
1
0
0
Short Circuit Rating (SC, amps)
U1, 1000
C1, 1000 4X fuse max
C1, 1000 4X fuse max
C1, 1000 4X fuse max
C1, 1000 4X fuse max
CSA
YES
YES
YES
YES
YES
Phase
—
1
1
1
1
RECOMMENDED TORQUE SPECIFICATIONS
AUXILIARY SWITCH RATING
Component
Torque (in-lbs)
3.0 amps
@
120 VAC
50 VDC
6-32 Mounting Inserts
6 to 8
6-32 Screw Terminals
6 to 8
APPROXIMATE WEIGHT PER POLE
3/8-32 Mounting Bushing Nut
20 to 25
1.8 Ounces
49 Grams
AP Series - Specifications
78
相关PDF资料 |
PDF描述 |
|---|---|
| RC0805FR-073K16L | RES 3.16K OHM 1/8W 1% 0805 SMD |
| P4SMA250AHE3/5A | TVS 300W 250V 5% UNIDIR SMA |
| P4SMA250A-E3/5A | TVS 300W 250V 5% UNIDIR SMA |
| IELBXK110-36461-2-V | CIRCUIT BREAKER |
| TMM-143-01-T-S-SM | CONN HEADER 43POS SNGL 2MM SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AP112-1R-36616-2 | 制造商:Sensata Technologies 功能描述:AP112-1R-36616-2 /Pole # 3 /Prod Family: 0202 |
| AP112-1R-36616-3 | 功能描述:CIRCUIT BREAKER SP CUSTOM RoHS:是 类别:过电压，电流，温度装置 >> 断路器 系列:AP 标准包装:3 系列:AS168X 断路器类型:热磁动式 电压:65VDC，277/480VAC 电流 - 跳闸(It):30A 极数:3 触动器类型:按片 安装类型:DIN 轨道 其它名称:4420.02104420.0210-ND486-2338AS168X-CB3G300-NDCBE AS168X-CB3G300 |
| AP112-1R-36616-5 | 功能描述:CIRCUIT BREAKER SP CUSTOM RoHS:是 类别:过电压，电流，温度装置 >> 断路器 系列:AP 标准包装:3 系列:AS168X 断路器类型:热磁动式 电压:65VDC，277/480VAC 电流 - 跳闸(It):30A 极数:3 触动器类型:按片 安装类型:DIN 轨道 其它名称:4420.02104420.0210-ND486-2338AS168X-CB3G300-NDCBE AS168X-CB3G300 |
| AP112-1R-40-203 | 制造商:Sensata Technologies 功能描述:Circuit Breaker Magnetic Circuit Protectors 3Pole 20A 240VAC |
| AP112-1R-41-103 | 制造商:Sensata Technologies 功能描述:Circuit Breaker Magnetic Circuit Protectors 3Pole 10A 240VAC |
发布紧急采购，3分钟左右您将得到回复。