参数资料
| 型号： | AP7165-SPG-13 |
| 厂商： | Diodes Inc |
| 文件页数： | 10/15页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO ADJ .6A 8-SOIC |
| 标准包装： | 1 |
| 稳压器拓扑结构： | 正，可调式 |
| 输出电压： | 0.8 V ~ 5 V |
| 输入电压： | 2.2 V ~ 5.5 V |
| 电压 - 压降（标准）： | 0.3V @ 500mA |
| 稳压器数量： | 1 |
| 电流 - 输出： | 600mA（最小值） |
| 电流 - 限制（最小）： | 600mA |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm Width）裸露焊盘 |
| 供应商设备封装： | 8-SOP-EP |
| 包装： | 标准包装 |
| 产品目录页面： | 1135 (CN2011-ZH PDF) |
| 其它名称： | AP7165-SPGDIDKR |
AP7165
600mA LOW DROPOUT REGULATOR WITH POK
Application Notes (cont.)
Low Quiescent Current
The AP7165, consuming only around 125μA for all input
range and output loading, provides great power saving in
portable and low power applications.
Wide Output Range
The AP7165, with a wide output range of 0.8V to 5.0V,
provides a versatile solution for many portable and low
power applications.
Thermal Shutdown Protection
Thermal protection disables the output when the junction
temperature rises to approximately +150°C, allowing the
device to cool down. When the junction temperature
reduces to approximately +125°C the output circuitry is
enabled again. Depending on power dissipation, thermal
resistance, and ambient temperature, the thermal protection
circuit may cycle on and off. This cycling limits the heat
dissipation of the regulator, protecting it from damage due
to overheating.
Power Dissipation
The device power dissipation and proper sizing of the
thermal plane that is connected to the thermal pad is
critical to avoid thermal shutdown and ensuring reliable
operation. Power dissipation of the device depends on
input voltage and load conditions and can be calculated
by:
P D = ( V IN ? V OUT ) xI OUT
The AP7165 is available in the U-DFN3030-10 and SO-
8EP packages, both with exposed pad, which is the
primary conduction path for heat to the printed circuit
board (PCB). The pad can be connected to ground or be
left floating; however, to ensure the device will not
overheat, it should be attached to an appropriate amount
of copper PCB area.
However, the maximum power dissipation that can be
handled by the device depends on the maximum junction
to ambient thermal resistance, maximum ambient
temperature, and maximum device junction temperature,
which can be approximated by the equation below:
P D (max@ T A ) =
( + 145 ° C ? T A )
R θ JA
AP7165
Document number: DS31252 Rev. 7 - 2
10 of 15
www.diodes.com
March 2012
? Diodes Incorporated
相关PDF资料 |
PDF描述 |
|---|---|
| AP7167-FNG-7 | IC REG LDO ADJ 1.2A 10-DFN |
| AP7168-SPG-13 | IC REG LDO ADJ 1.2A 8SOP |
| AP7173-FNG-7 | IC REG LDO ADJ 1.5A 10DFN |
| AP7215-33YG-13 | IC REG LDO 3.3V .6A SOT89-3 |
| AP7217-33SG-13 | IC REG LDO 3.3V .5A 8-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AP7167 | 制造商:DIODES 制造商全称:Diodes Incorporated 功能描述:1.2A LOW DROPOUT REGULATOR WITH POK |
| AP7167_10 | 制造商:DIODES 制造商全称:Diodes Incorporated 功能描述:1.2A LOW DROPOUT REGULATOR WITH POK |
| AP7167-FNG-7 | 功能描述:低压差稳压器 - LDO LDO 250mV 2.2V - 5.5V RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| AP7167-SPG-13 | 功能描述:低压差稳压器 - LDO 1.2A 250mV 2.2V-5.5V RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| AP7168 | 制造商:DIODES 制造商全称:Diodes Incorporated 功能描述:1.2A LOW DROPOUT REGULATOR WITH POK |
发布紧急采购，3分钟左右您将得到回复。