收藏本站
参数资料
型号： AP80C51C-30D
厂商： ATMEL CORP
元件分类： 微控制器/微处理器
英文描述： 8-BIT, MROM, 30 MHz, MICROCONTROLLER, PDIP40
封装： PLASTIC, DIP-40
文件页数： 97/170页
文件大小： 4133K
代理商： AP80C51C-30D
32
ATtiny4/5/9/10 [DATASHEET]
8127F–AVR–02/2013
8.4
Register Description
8.4.1
WDTCSR – Watchdog Timer Control and Status Register
Bit 7 – WDIF: Watchdog Timer Interrupt Flag
This bit is set when a time-out occurs in the Watchdog Timer and the Watchdog Timer is configured for interrupt.
WDIF is cleared by hardware when executing the corresponding interrupt handling vector. Alternatively, WDIF is
cleared by writing a logic one to the flag. When the WDIE is set, the Watchdog Time-out Interrupt is requested.
Bit 6 – WDIE: Watchdog Timer Interrupt Enable
When this bit is written to one, the Watchdog interrupt request is enabled. If WDE is cleared in combination with
this setting, the Watchdog Timer is in Interrupt Mode, and the corresponding interrupt is requested if time-out in the
Watchdog Timer occurs.
If WDE is set, the Watchdog Timer is in Interrupt and System Reset Mode. The first time-out in the Watchdog
Timer will set WDIF. Executing the corresponding interrupt vector will clear WDIE and WDIF automatically by hard-
ware (the Watchdog goes to System Reset Mode). This is useful for keeping the Watchdog Timer security while
using the interrupt. To stay in Interrupt and System Reset Mode, WDIE must be set after each interrupt. This
should however not be done within the interrupt service routine itself, as this might compromise the safety-function
of the Watchdog System Reset mode. If the interrupt is not executed before the next time-out, a System Reset will
be applied.
Note:
1. WDTON configuration bit set to “0“ means programmed and “1“ means unprogrammed.
Bit 4 – Res: Reserved Bit
This bit is reserved and will always read zero.
Bit 3 – WDE: Watchdog System Reset Enable
WDE is overridden by WDRF in RSTFLR. This means that WDE is always set when WDRF is set. To clear WDE,
WDRF must be cleared first. This feature ensures multiple resets during conditions causing failure, and a safe
start-up after the failure.
Bit
765
4321
0
0x31
WDIF
WDIE
WDP3
–
WDE
WDP2
WDP1
WDP0
WDTCSR
Read/Write
R/W
R
R/W
Initial Value
0
X
0
Table 8-2.
Watchdog Timer Configuration
WDTON(1)
WDE
WDIE
Mode
Action on Time-out
1
0
Stopped
None
1
0
1
Interrupt Mode
Interrupt
1
0
System Reset Mode
Reset
11
1
Interrupt and System
Reset Mode
Interrupt, then go to
System Reset Mode
0
x
System Reset Mode
Reset
相关PDF资料
PDF描述
AS80C51C-30D 8-BIT, MROM, 30 MHz, MICROCONTROLLER, PQCC44
AF180C51C-30R 8-BIT, MROM, 30 MHz, MICROCONTROLLER, PQFP44
AF280C51C-30D 8-BIT, MROM, 30 MHz, MICROCONTROLLER, PQFP44
AF280C51C-30R 8-BIT, MROM, 30 MHz, MICROCONTROLLER, PQFP44
AT80C51C-30D 8-BIT, MROM, 30 MHz, MICROCONTROLLER, PQFP44
相关代理商/技术参数
参数描述
AP80C51FA 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
AP80N03S 制造商:Advanced Power Electronics Corp 功能描述:ELECTRONIC COMPONENT
AP80N30W 制造商:A-POWER 制造商全称:Advanced Power Electronics Corp. 功能描述:N-CHANNEL ENHANCEMENT MODE POWER MOSFET
AP80N30W_10 制造商:A-POWER 制造商全称:Advanced Power Electronics Corp. 功能描述:N-CHANNEL ENHANCEMENT MODE POWER MOSFET
AP80T10GP-HF 制造商:A-POWER 制造商全称:Advanced Power Electronics Corp. 功能描述:N-CHANNEL ENHANCEMENT MODE POWER MOSFET
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*