- 您现在的位置：买卖IC网 > Datasheet目录310 > AP8803WTG-7 (Diodes Inc)IC LED DRIVER CONN CURR TSOT23-5 Datasheet资料下载
参数资料
| 型号： | AP8803WTG-7 |
| 厂商： | Diodes Inc |
| 文件页数： | 8/10页 |
| 文件大小： | 0K |
| 描述： | IC LED DRIVER CONN CURR TSOT23-5 |
| 标准包装： | 1 |
| 恒定电流： | 是 |
| 拓扑： | PWM，降压（降压） |
| 输出数： | 1 |
| 内部驱动器： | 是 |
| 类型 - 主要： | 通用 |
| 频率： | 700kHz |
| 电源电压： | 8 V ~ 30 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | SOT-23-5 细型，TSOT-23-5 |
| 供应商设备封装： | TSOT-23-5 |
| 包装： | 标准包装 |
| 工作温度： | -40°C ~ 105°C |
| 产品目录页面： | 1138 (CN2011-ZH PDF) |
| 其它名称： | AP8803WTG-7DIDKR |
AP8803
Application Information (cont.)
Fault Condition Operation
The AP8803 has by default open LED protection. If the LEDs should become open circuit the AP8803 will stop oscillating; the SET pin will rise
to V IN and the SW pin will then fall to GND. No excessive voltages will be seen by the AP8803.
If the LEDs should become shorted together the AP8803 will continue to switch however the duty cycle at which it will operate will change
dramatically and the switching frequency will most likely decrease. The on-time of the internal power MOSFET switch will be significantly
reduced because almost all of the input voltage is now developed across the inductor. The off-time will be significantly increased because the
reverse voltage across the inductor is now just the Schottky diode voltage (See Figure 7) causing a much slower decay in inductor current.
During this condition the inductor current will remain within its controlled levels and so no excessive heat will be generated within the AP8803.
Figure 7 Switching Characteristics (normal open to short LED chain)
Thermal Considerations
The graph below in Figure 8, gives details for power dissipation derating. This assumes the device to be mounted on a 25 x 25mm PCB with
1oz copper standing in still air.
1.2
1
0.8
0.6
0.4
0.2
0
-50
-25
0
25
50
75
100
125
150
Ambient Temperature (°C)
Figure 8 Power Dissipation Derating Curve
The maximum power dissipation is affected by PCB area and the area of copper associated with the LX pin as well as other components on the
PCB generating heat – such as the inductor, capacitor or rectifiers.
AP8803
Document number: DS31970 Rev. 5 - 2
8 of 10
www.diodes.com
August 2012
? Diodes Incorporated
相关PDF资料 |
PDF描述 |
|---|---|
| APEK4402KLP-01-T-DK | BOARD EVAL FOR A4402 |
| APP-001-15AMP | PLUG AUTO PWR BLACK W/LED 15AMP |
| APP-001-20AMP | AUTO PLUG 12VOLT WITH 20AMP FUSE |
| APP-001-VO | PLUG AUTO PWR BLACK W/LED IND |
| APP-001 | PLUG AUTO PWR BLACK W/LED IND |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AP8821 | 制造商:APLUS 制造商全称:APLUS 功能描述:21 sec VOICE OTP |
| AP8841 | 制造商:American Power Conversion Corp (APC by Schneider Electric) 功能描述:RACK PDU 2G, METERED, ZEROU, 30A, 200/208V, (36) C13 & (6) C19 制造商:Schneider Electric 功能描述:RACK PDU 2G, METERED, ZEROU, 30A 200/208V, (36) C13 & (6) C1 - Bulk |
| AP8842 | 制造商:APLUS 制造商全称:APLUS 功能描述:42 sec VOICE OTP |
| AP8853 | 制造商:Schneider Electric 功能描述:RACK PDU 2G, METERED, ZEROU, 32A, 230V, (36) C13 & (6) C19 - Bulk |
| AP8853-25PI | 制造商:ANSC 功能描述:AP8853-25PI 300MA 2.5V LDO LINEAR REGULATOR /OGI |
发布紧急采购，3分钟左右您将得到回复。