Two-Channel Supervisory IC
Copyright
ANPEC Electronics Corp. Rev.
Rev. A.1 - May., 2005
www.anpec.com.tw
1
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain
the latest version of relevant information to verify before placing orders.
APL6535
Features
General Description
Applications
Graphics Cards
Portable Battery-Powered Equipment
μP Voltage Monitoring
Set-Top Boxes
Notebook Computer
Multiple Supply System
·
2.6V to 5.5V Input Voltage Range
·
Low Quiescent Current : less than 50
μ
A
·
High Accuracy Detection Threshold :
±
1.6%
·
Adjustable Undervoltage Lockout for Each
Supply
·
Active high PGOOD Output
·
Guaranteed PGOOD Valid to Falling V
CC
< 1V
·
VMON Glitch Immunity : 30μs
Lead Free Available (RoHS Compliant)
Pinouts
°
The APL6535 is a two channel supervisory IC designed
to monitor voltage supplies in mP and digital system.
This IC can supervise any positive voltage using an
external resistor divider to translate to a lower voltage
for comparison to the internal 0.633V reference. Once
any VMON input falls below 0.633V the PGOOD out-
put is pulled low, the hysteresis of the internal refer-
ence is 15mV. The PGOOD pin has an internal 20kW
pull-up to V
CC
making an external pull-up resistor
unnecessary. Each rail’s VMON point is independently
adjustable with a resistor divider. The PGOOD output
is guaranteed to be valid with IC bias lower than 1V.
This IC is designed to reject fast line transient glitches
30ms on VMON input. The PGOOD output is an open-
drain to allow ORing of multiple signals. If less than
four voltages are being monitored, connect the unused
VMON pins to V
CC
. The ENABLE input pin provides
for a reset of the PGOOD output when it is pulled
down below 0.5V. With an internal 10mA pull-up to
VCC, it can be signaled with common logic or pulled
to ground with a push button switch. APL6535 come
in a miniature SOT-23-5 package.
GND
1
2
3
5
4
VMON1
PGOOD
Vcc
VMON2
SOT-23-5 Top View
APL6535