参数资料
| 型号： | APM8600FB-7 |
| 厂商： | Diodes Inc |
| 文件页数： | 8/14页 |
| 文件大小： | 0K |
| 描述： | IC BATT CHRGR LI-ION DFN3030-14 |
| 标准包装： | 1 |
| 功能： | 充电管理 |
| 电池化学： | 锂离子（Li-Ion）、锂聚合物（Li-Pol） |
| 电源电压： | 4.15 V ~ 7 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 14-UFDFN 裸露焊盘 |
| 供应商设备封装： | 14-UDFN3030（3x3） |
| 包装： | 标准包装 |
| 其它名称： | APM8600FB-7DIDKR |
APM8600
SINGLE CELL LINEAR LITHIUM BATTERY CHARGER
WITH 28V OVP AND PROGRAMMABLE CHARGE TIMER
Functional Description (continued)
INPUTS
DC
Pins 12 and 13 are the DC input. This input will allow charging from input voltages between 4.15V and 7V, and can
withstand up to 28V without device damage although charging is disabled above 7.5V (typ.).
GND
EN
System ground connection.
Pin 8 is the enable pin of the device. When pulled low the device will operate normally. When high, the device will
remain in the disabled state. For auto-starting, connect pin 8 directly to GND.
SETI
Pin 2 allows the charge currents to be programmed.
RSETI =
1500
ICHARGE
The charge current setting also changes the currents in prequal and top-off modes (being 10% and 7.5% of I CHARGE
respectively):
IPREQUAL =
150
RSETI
ITOPOFF =
112.5
RSETI
This pin can also be used to monitor the battery charging current:
ICHARGE =
VSETI × 1000
RSETI
THM
The thermistor connection is on pin 3. This allows the battery temperature to be monitored using a 10k NTC
thermistor, which should be placed as close as possible to the battery cell. If no thermistor is used then this input should be
connected directly to ground. The charger will operate when there is less than 315 ? on this input (i.e., no thermistor
connected); will be disabled when there is between 315 ? and 3.94k ? ; enabled when between 3.94k ? and 28.3k ? ; and
disabled above 28.3k ? .
Thermistor
Resistance ? in ? k Ω? at
Typical ? in ? °C
Enabled
Beta
0°C 25°C
50°C
Hot ? trip Cold ? Trip
3000
3250
25.1 10 4.6
27.1 10 4.3
55.1
52.6
‐ 3.2
‐ 1.3
3500
29.3 10 4
50.5 0.5
0
315 ?
3.94k
R THM
28.3k
3750
31.7 10 3.8
48.6 2.0
APM8600
Document number: DS35140 Rev. 1 - 2
8 of 14
December 2010
? Diodes Incorporated
相关PDF资料 |
PDF描述 |
|---|---|
| APM8601FB-7 | IC BATT CHRGR LI-ION UDFN3030-14 |
| APT1212A | RELAY PHOTOTRIAC ZC 600V 6-SMD |
| APV1122AX | ISO 5KVRMS 1CH VOLTAIC 6DIP SMT |
| APV2121S | ISOLAT 2.5KVAC 1CH VOLTAIC 4-SOP |
| APX1117DG-13 | IC REG LDO ADJ 1A TO-252-3 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| APM8601 | 制造商:DIODES 制造商全称:Diodes Incorporated 功能描述:DUAL CHANNEL SINGLE CELL LINEAR LITHIUM BATTERY CHARGER WITH 28V |
| APM8601FB-7 | 功能描述:电池管理 Dual CH 28V OVP Lith Battery Charger RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| APM86190-SGA1200T | 制造商:AppliedMicro 功能描述:PPC 32BIT 1.5GHZ , 512KB L2 CACHE, 10/100/1G ETHERNET, PCIE |
| APM86190-SGA1400T | 制造商:AMCC 功能描述:32BIT 1.5GHZ PPC, 512KB L2 CACHE, 10/100/1G ETHERNET, PCIE, - Trays |
| APM86190-SNB1200T | 制造商:AppliedMicro 功能描述: 制造商:AppliedMicro 功能描述:32BIT 1.2GHZ PPC, DUAL/SINGLE CORE, 512/256KB L2 CACHE, 10/1 - Trays |
发布紧急采购，3分钟左右您将得到回复。