参数资料
| 型号： | APM8601FB-7 |
| 厂商： | Diodes Inc |
| 文件页数： | 10/14页 |
| 文件大小： | 0K |
| 描述： | IC BATT CHRGR LI-ION UDFN3030-14 |
| 标准包装： | 1 |
| 功能： | 充电管理 |
| 电池化学： | 锂离子（Li-Ion）、锂聚合物（Li-Pol） |
| 电源电压： | 4.15 V ~ 7 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 14-UFDFN 裸露焊盘 |
| 供应商设备封装： | 14-UDFN3030（3x3） |
| 包装： | 标准包装 |
| 其它名称： | APM8601FB-7DIDKR |
APM8601
DUAL CHANNEL SINGLE CELL LINEAR LITHIUM BATTERY
CHARGER WITH 28V OVP and PROGRAMMABLE CHARGE
TIMER
Functional Description (continued)
EN
CHG
4.2V
3V
V BAT
0V
I CHARGE
1500/R SETI
I BAT
I PREQUAL
150/R SETI
0A
I TOPOFF
112.5/R SETI
t
CHARGING PROCESS DESCRIPTION
The charging process is as follows, working through the state diagram.
The device will begin in the Disable state as the input power supply ramps from 0V. Once the input power supply has got into
the valid range (4.15V – 7V), and the device is enabled then it will enter the Prequal state. This state allows for slow charging
of a severely discharged battery. If the battery is already partially charged then the condition to move into the Charge state is
met. If it is not then the slow charge will increase the battery voltage until it can enter the Charge state, or if the voltage does
not rise sufficiently before the charge timer runs out (set using the capacitor on the CT pin) then the device will go into the
Fault state, indicating that the battery cell may be damaged or has failed and is not taking charge. In the Prequal state the
battery temperature can be monitored with a 10k NTC thermistor connected to the THM pin, and if the battery temperature
goes out of range (above ~50°C or below ~0°C, depending on thermistor choice) then charging will be suspended with the
device going into the THM state.
Once the battery has charged to a level of 3V, the device enters the Charge state, allowing faster charging of the battery in
its normal voltage range, with 10 times the current used in the Prequal state. For information on setting the charge currents,
see the functional description of the SETI pin. Again, the battery temperature is monitored and charging will be suspended if
the temperature goes out of range. The Charge state will last until the current drawn by the battery drops to 7.5% of the full
charge current. The device will then enter the Top-Off state, maintaining battery voltage and providing top-off charging
current for the time defined by the C T value. Once that timer completes, the device will enter the Done state, with zero battery
current. If the battery voltage falls below 4.05V then the device will automatically return to the Charge state.
APM8601
Document number: DS35138 Rev. 1 - 2
10 of 14
December 2010
? Diodes Incorporated
相关PDF资料 |
PDF描述 |
|---|---|
| APT1212A | RELAY PHOTOTRIAC ZC 600V 6-SMD |
| APV1122AX | ISO 5KVRMS 1CH VOLTAIC 6DIP SMT |
| APV2121S | ISOLAT 2.5KVAC 1CH VOLTAIC 4-SOP |
| APX1117DG-13 | IC REG LDO ADJ 1A TO-252-3 |
| APX803-46SAG-7 | IC MPU RESET CIRC 4.63V SOT23-3 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| APM86190-SGA1200T | 制造商:AppliedMicro 功能描述:PPC 32BIT 1.5GHZ , 512KB L2 CACHE, 10/100/1G ETHERNET, PCIE |
| APM86190-SGA1400T | 制造商:AMCC 功能描述:32BIT 1.5GHZ PPC, 512KB L2 CACHE, 10/100/1G ETHERNET, PCIE, - Trays |
| APM86190-SNB1200T | 制造商:AppliedMicro 功能描述: 制造商:AppliedMicro 功能描述:32BIT 1.2GHZ PPC, DUAL/SINGLE CORE, 512/256KB L2 CACHE, 10/1 - Trays |
| APM86281-NGA1200T | 制造商:AppliedMicro 功能描述:32BIT 1.5GHZ PPC, 512KB L2 CACHE, 10/100/1G ETHERNET, PCIE, - Trays |
| APM86281-SGA1200T | 制造商:AppliedMicro 功能描述:32BIT 1.5GHZ PPC, 512KB L2 CACHE, 10/100/1G ETHERNET, PCIE, - Trays |
发布紧急采购，3分钟左右您将得到回复。