- 您现在的位置：买卖IC网 > Datasheet目录203 > APS2424 (Tripp Lite)INVERTR 2400W 24VDC W/CHRGR Datasheet资料下载
参数资料
| 型号： | APS2424 |
| 厂商： | Tripp Lite |
| 文件页数： | 2/5页 |
| 文件大小： | 0K |
| 描述： | INVERTR 2400W 24VDC W/CHRGR |
| 标准包装： | 1 |
| 系列： | PowerVerter® |
| 类型： | 反相器，UPS |
| 输出电压： | 120VAC |
| 输入电压： | 24VDC，120VAC |
| AC 电源插座： | 硬连线 |
| 连接器 - AC 输出： | 无（硬连线） |
| 连接器 - 电压输入： | 端子，接线盒 |
| 电源 - 连续输出： | 2400W |
| 电源 - 输出电涌： | 4800W |
| 遥控能力： | 是 |
| 局部使用： | 国际通用 |
| 尺寸： | 16.25" L x 8.50" W x 7.25" H（412.8mm x 215.9mm x 184.1mm） |
| 特点： | 用于UPS 模式的自动功率传输，电池充电器 |
| 重量： | 39 磅（17.7kg） |
| 其它名称： | TL222 |
16.6 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment
compatible with a one cycle transfer time
2400 watts continuous AC output in inverter mode, 2400 watts continuous AC output in AC mode
Double Boost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds
OverPower inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions. (For best results,
utilize OverPower usage for as short of a duration as possible, ensure battery bank and cabling is able to provide full nominal DC voltage under load and
allow inverter/charger to fully cool before and after OverPower usage.)
3 stage, 14/55 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging
Protected hardwire bolt-down input lugs safely accept heavy gauge input wiring from attached battery bank
Protected hardwire output passes 120V line power or inverter output through to connected equipment
Reliability enhanced large-transformer design with secure mounting flanges and protected DC wiring terminals
Moisture-resistant construction enables vehicular or marine operation in high humidity environments
3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full
battery charge when AC is present without auto transfer and SYSTEM OFF settings.
Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status
Set of 4 configuration dipswitches support wet/gel battery charging profiles, adjustable 135/145V high voltage auto transfer during overvoltages and
selectable 75/85/95/105V AC low voltage auto transfer during brownouts
Set of 4 additional configuration dipswitches support 4 levels of charger limiting relative to output load size, a battery equalization program and battery
charger low/high settings
Resettable 30A charger AC input breaker and resettable 20A AC output breaker and automatic 2 speed cooling fan protect the inverter from load and
temperature related failures
Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system
Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop
Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory). Optional APSRM4 accessory also includes
user configurable jacks to support inverter shutoff or startup as a vehicle ignition is engaged
Load sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode as load conditions change
Specifications
OVERVIEW
Intended Application
OUTPUT
Frequency compatibility
Output watts
Continuous output capacity (watts)
Peak output capacity (watts)
Output nominal voltage
Output voltage regulation
Output frequency regulation
Emergency Home Power (Sump Pumps, Furnace Motors, Computers, Lighting & Radios)
60 Hz
2400
2400
4800
120V
LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC):
Maintains PWM sine wave output voltage of 120 V AC (+/-5%).
60 Hz (+/- 0.3 Hz)
2 / 5
相关PDF资料 |
PDF描述 |
|---|---|
| APS2448UL | INVERTER 2400W 48VDC OR 120VAC |
| APS3636VR | INVERTER 3600W 36VDC OR 120VAC |
| APS512 | INVERTER 500W 12VDC 2OUT W/CHRGR |
| APS612 | INVERTER 600W 12VDC 2OUT W/CHRGR |
| APS750 | INVERTER W/BATT CHARGE 750W 2 OT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| APS2448UL | 功能描述:功率调节 48V DC TO AC INVERTR RoHS:否 制造商:Power-One 输入电压（标称）: 输出电压: 输出功率: 电压调节准确度: 出口数量: 特点: 安装类型: |
| APS2509S-T-R | 功能描述:SPEAKER PIEZO 25.2X16.6MM RoHS:是 类别:音频产品 >> 扬声器 系列:APS 产品目录绘图:PSR-40(F08S02,N08A05,N08A)-JQ Top PSR-4(0,5)N08A-JQ Side 特色产品:Miniature Speaker Series of Audible Alarms 标准包装:1 系列:- 类型:磁性 频率范围:500Hz ~ 6kHz 阻抗:8 欧姆 声压级:87dB 功率 - 额定:0.25W 功率 - 最大:0.5W 高度:4.80mm 尺寸/尺寸:40.00mm 直径 形状:圆形 端子:焊盘 材料 - 锥体:聚酯薄膜 材料 - 磁体:铁氧体 产品目录页面:2656 (CN2011-ZH PDF) 其它名称:458-1132 |
| APS-250ELL101MJC5S | 功能描述:铝有机聚合物电容器 100uF 25 Volt RoHS:否 制造商:Panasonic Electronic Components 电容:470 uF 容差:20 % 电压额定值:2.5 V ESR:4.5 mOhms 工作温度范围:- 40 C to + 105 C 端接类型:SMD/SMT 外壳直径: 外壳长度:7.3 mm 外壳宽度:4.3 mm 外壳高度:1.9 mm 封装:Reel |
| APS-250ELL680MHB5S | 功能描述:铝有机聚合物电容器 68uF 25 Volt RoHS:否 制造商:Panasonic Electronic Components 电容:470 uF 容差:20 % 电压额定值:2.5 V ESR:4.5 mOhms 工作温度范围:- 40 C to + 105 C 端接类型:SMD/SMT 外壳直径: 外壳长度:7.3 mm 外壳宽度:4.3 mm 外壳高度:1.9 mm 封装:Reel |
| APS-250ESS101MJC5S | 制造商:CHEMI-CON 制造商全称:United Chemi-Con, Inc. 功能描述:CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS |
发布紧急采购，3分钟左右您将得到回复。